• Journal of the Korean Ceramic Society
• /
• v.36 no.12
• /
• pp.1390-1395
• /
• 1999

Zr(Y,Ce)O2 TZP ceramics were prepared by sintering compacts of 3 mol% Y2O3-TZP(3Y-TZP) powders with different amount of 12 mol% CeO2-TZP(12Ce-TZP) in air at 140$0^{\circ}C$ for 2 h. The phase changes microstructure and mechanical properties of Zr(Y. Ce)O2 TZP after hydrothermal aging(20$0^{\circ}C$ 5h) were investigated. Although an addition of 12Ce-TZP accelerated the grain growth of Zr(Y, Ce)O2 TZP it restrained the transformation of tetragonal to the monoclinic phase during aging. The degradation in mechanical properties of sintered bodies was governed by the formed monoclinic phase and chemical composition. Induced Vickers indentation crack was propagated intergranually. From SEM observation of the fracture surfaces the pull-out of individual grain was confirmed.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.15-23
• /
• 2011

Purpose: Thy yttria tetragonal zirconia polycrystalline(Y-TZP) is a good structural ceramic for dental restoration. But it have a problem that delamination of veneering ceramic from the Y-TZP core materials. The problem generally occur at the interface, thus this study was conducted to evaluate the interface of Y-TZP using scanning electron microscopy(SEM). Methods: To investigate this aspect, high-resolution SEM observations were made of polished and etched (HF content gel) cross-sections of the interface area. Dry and moist veneering porcelain powders were built up on the zirconia base. Results: The extent of this surface faceting is dependent upon the moisture content of the porcelain powder and the firing temperature. More moisture and higher final heating temperature accelerates the observed faceting of the Y-TZP grains at the interface to the veneering ceramic. Conclusion: These changes of the Y-TZP grains indicate that destabilization of the tetragonal phase of zirconia occurs at the interface during veneering with ceramic. It may result in a reduction of the stability of the zirconia and interface.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1177-1185
• /
• 1996

Y-TZP/Ce-TZP ceramics having relative sintered densities of>95% average grain sizes of 0.36$\mu\textrm{m}$ microhar-dness of 1150 kg/mm2 fracture strength of 390-830 MPa and toughness of 6.4-10.2 MPa$.$mm1/2 were prepared by conventional sintering of 3 mol% Y2O3-ZrO2 and 12 mol% CeO2-ZrO2 powders at 1400 and 1500$^{\circ}C$ The average grain sizes of Y-TZP/Ce-TZP ceramics were mainly governed by those of Ce-TZP. White increasing Ce-TZP content toughness increased while microhardness and fracture strength decreased. With comparing microhardness and toughness fracture strength was more sensitive on not only grain size but also other factors such as microstructural and compositional variations. The densification of Y-TZP/Ce-TZP cermaics was not greatly affected by composition and soaking time at temperature over 1400$^{\circ}C$ With increasing CE-TZP content the stability of t-ZrO2 decreased under thermal aging in air whereas increased in hydrothermal atmosphere and aqueous solution.

• Journal of the Korean Ceramic Society
• /
• v.38 no.1
• /
• pp.56-60
• /
• 2001

90.24 mol% ZrO$_2$-5.31 mol% $Y_2$O$_3$-4.45 mol% Nb$_2$O$_{5}$ 조성의 (Y,Nb)-TZP와 (Y,Nb)-TZP/Al$_2$O$_3$복합체를 155$0^{\circ}C$~1$600^{\circ}C$에서 1~2시간 소결하여 제조하였다. 시편의 결함에 대한 저항성을 조사하기 위하여 R-curve, Weibull modulus, slow crack growth 변수 등을 조사하였다. 실험결과, (Y,Nb)-TZP와 (Y,Nb)-TZP/Al$_2$O$_3$복합체 모두 상용 3Y-TZP 보다 우수한 결함 저항성이 관찰되었다. (Y,Nb)-TZP/Al$_2$O$_3$복합체의 결함 저항성은 $Al_2$O$_3$첨가에 의한 결정립 가교 인화, 분산강화, R-curve 효과에 의한 것으로 추정된다.

• Journal of the Korean Ceramic Society
• /
• v.29 no.4
• /
• pp.283-292
• /
• 1992

Duplex composites such as Y-TZP/Y-TZP-20 wt.% Al2O3 and Y-TZP/Y-TZP- 40 wt.% Al2O3 were made by mixing the sieve-shaked granules followed by isostatic pressing and sintering at 150$0^{\circ}C$ for 1 hour. So Y-TZP became matrix region and Y-TZP-20 wt.% Al2O3 or Y-TZP-40 wt.% Al2O3 became dispersed regions. In these composites, propagating cracks due to thermal shock always run into the dispersed region because these regions act as compressive zone due to low thermal expansion than matrix region. So duplexes having dispersed regions of Y-TZP-40 wt.% Al2O3 showed higher retained strength after thermal shock than matrix only composites because crack propagations were stopped more or less in the dispersed region. But when crack propagations were much more easy than matrix like Y-TZP-20 wt.% Al2O3 region, retained strength was decreased than the matrix only composites despite of the low initial strength.

• Journal of the Korean Ceramic Society
• /
• v.30 no.8
• /
• pp.651-656
• /
• 1993

Granulated Y-TZP powders were coated by using Sol-Gel method and the coating effect of Al2O3 on the isothermal phase transformation in Al2O3 coated Y-TZP powders was investigated. During aging, tetragonal phase in Y-TZP powder were isothermally transformed to monoclinic, but the tetragonal phase in Al2O3 coated Y-TZP powders was continuously retained in spite of long aging. It can be considered that the improvement of thermal stability of tetragonal phase in Al2O3 coated Y-TZP powders may be due to the increase of constraint effect near tetragonal phase, and the suppression of surface transformation by obstructing the reaction between the surface of Y-TZP and H2O.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.171-174
• /
• 1997

It was experimentally identified, for the first time, that oxygen phonons play an important role in the low temperature degradation(tetragonallongrightarrowmonoclinic phase transformation) of yttria stabilized tetragonal zir-conia polycrystals (Y-TZP). The degradation accompanied by immersing the samples in the boiling water were markedly reduced by substituting of 18O for 16O in Y-TZP. This was attributed to the heavier mass of 18O which leads to the smaller probability to find oxygen atoms beyond certain critical displacements.

• Journal of the Korean Ceramic Society
• /
• v.27 no.2
• /
• pp.226-232
• /
• 1990

The degradation phenomena and thermal stability of 2.5Y-TZP at low-temperature were studied by means of XRD, Raman spectra and microstructural analysis. The degradation of heat-treated 2.5Y-TZP at 20$0^{\circ}C$-20hr in air was observed on the TZP surface, be caused by the cracks generated from tlongrightarrowm transformation, and the cracks was propagated inside the polycrystalline body. The ZrO2 grain boundaries and grains near the crack were revealed as if these were diffused and dissolved. And it was also observed mlongrightarrowt transformation as the degraded TZP was refired at 140$0^{\circ}C$, and it was thought to be the fact that the moisture in atmosphere during the aging process contributed to the degradation. The thermal stability of 2.5Y-TZP was improved dramatically with an addition of 3w/o CeO2 or a provision of high Y2O3 concentration on the TZP surface.

• Journal of the Korean Ceramic Society
• /
• v.42 no.6 s.277
• /
• pp.411-416
• /
• 2005

Y-TZP(Yttria-stabilized Tetragonal Zirconia Polycrystal) ceramics are of great interest as engineering and structural materials due to their excellent mechanical properties arising from transformation toughening, it is also reported that the 3Y-TZP($3 mol\%$ Yttria-stabilized Tetragonal Zirconia Polycrystal) has the best mechanical properties in Y-TZP ceramics. But to use widely for engineering and structural materials, it remains an important challenge to be able to improve its fracture toughness. In order to produce the 3Y- TZP ceramics showing much better mechanical properties, milling method adding monoclinic zirconia to 3Y-TZP was adopted and the resultant mechanical properties containing apparent density and fracture toughness were measured by using proper techniques. Experimental results showed that the 3Y-TZP specimen containing $33 wt\%$ of monoclinic zirconia, which was sintered at $1450^{\circ}C$, has the highest fracture toughness value of $11.38 MPa{\cdot}m^{1/2}$ which is three times higher than that of normal 3Y-TZP ceramics.

• Journal of the Korean Ceramic Society
• /
• v.38 no.5
• /
• pp.418-423
• /
• 2001

16 mole%의 CeO$_2$가 고용된 Ce-TZP 소결체 사이에 140~240$mu extrm{m}$ 두께의 Ce-TZP-5~30 vol% $Al_2$O$_3$중간층이 삽입된 층상복합체를 분말건식가압성형법에 의해 제조하였다. 소결온도는 $Al_2$O$_3$가 5~30 vol.% 첨가될 때 90% 이상의 소결밀도를 얻을 수 있도록 1$600^{\circ}C$로 정하였다. 이러한 3층 복합체에서 바깥의 Ce-TZP 지역에서의 파괴 형태는 입내파괴를 보여주었지만 $Al_2$O$_3$가 함유된 중간층에서는 입계파괴가 전이되면서 인성증가를 보여주었다. 이러한 층상 복합체의 경우 중간 층에 들어가는 Ce-TZP 중의 $Al_2$O$_3$함량이 30 vol.% 정도에 이르면 층간의 서로 다른 소결밀도 및 수축율, 열팽창계수 때문에 층간 소결 결함이 생겨 층간에서 균열의 전파가 큰 영향을 받음을 알 수 있었다. 반면 중간층의 $Al_2$O$_3$함량이 적을 경우 층간 결함이 생기지 않아 층간에서 균열의 전파가 별 영향을 받지 않음을 알 수 있었다.