• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.263-270
• /
• 2009

The effect of photoelectrocatalytic (PEC) degradation for different dyes with the CNT/$TiO_2$ electrode was studied. The prepared electrode was characterized with surface properties, structural crystallinity, elemental identification, and PEC activity. The $N_2$ adsorption data showed that the composites had decreased surface area compared with the pristine CNT. This indicated the blocking of micropores on the surface of CNT, which was further supported by observation via FESEM. XRD patterns of the composites showed that the CNT/$TiO_2$ composite contained a mixing anatase and rutile phase. EDX spectra showed the presence of C, O and Ti peaks for all samples. The decomposition efifciency of the prepared electrode was evaluated by the PEC degradation of three dyes (methylene blue (MB), rhodamine B (RH.B), methyl orange (MO)). The variations of the FT-IR spectra and pH value of dye solutions were measured during the PEC system; it was found that the CNT/$TiO_2$ electrode has better PEC degradation for MB solution than that of RH.B and MO. The proposed degradation mechanism was present.

• Journal of Environmental Science International
• /
• v.20 no.7
• /
• pp.873-879
• /
• 2011

Adsorption experiment of carbon dioxide was performed on MCM41 silica impregnated with two kinds of EDA(ethylenediamine) and MEA(monoethanolamine). The prepared adsorbents were characterized by BET surface area, X-ray diffraction and FT-IR. The $CO_2$ capture study was investigated in a U type packed column with GC/TCD. The results of XRD for MCM-41 and amine-impregnated MCM41 showed typical the hexagonal pore system. BET results showed the MCM 41 impregnated amine to have a surface area of 141 $m^2/g$ to 595 $m^2/g$ and FT-IR revealed a N-H functional group at about 1400$cm^{-1}$ to 1600$cm^{-1}$. The $CO_2$ adsorption capacity on EDA and MEA was as follow: MCM41-EDA30 > MCM41 -EDA40 >MCM41-EDA20 >MCM-EDA10 and MCM41-MEA40 >MCM41-MEA30 > MCM41-MEA20> MCM41-MEA10. The MCM41-EDA30 showed the highest adsorption capacity due to physical adsorption and chemical adsorption by amino-group content. The results suggest that mesoporous media with EDA is effective adsorbent for $CO_2$ capture from flue gases.

• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.810-816
• /
• 1999

The variations of crystalline structures and physical proerties of serpentine and talc mineral which was treated in a planetary ball mill, wre investigated by means of X-ray diffraction, FT-IR, DSC-TG, particle size analysis and SEM observation. The crystalline peaks of serpentine and talc in the XRD patterns were gradually reduced with the increase of grinding time and after 120 minutes turned into the amorphous phase, which is attributed to the disordering of the local structure around magnesium. The endothermic peaks for the ground serpentine and talc sample are observed at a considerably lower temperatures than that for the starting sample. A morphological change from the originally flat and irregular shape to spherically agglomerated particles was clearly observed.

• Journal of the Korean Ceramic Society
• /
• v.30 no.3
• /
• pp.222-228
• /
• 1993

In order to obtian TiO2 fine powder of high purity, the new method which is different from the sulfate process and the chloride one was employed. TiO2 was syntehsized by the reaction between elemental titanium particles and H2O2 solutiosn at 30~7$0^{\circ}C$, and then TiO2 powder was characterized using XRD, SEM, TEM, DTA and FT-IR. It was found that the initial reaction rate was fast at a high temperature due to the high generation of activated oxygen associated with thedecomposition of H2O2. However, the reaction was slowly proceeded at a low temperature due to slow decomposition of H2O2. In this experimental range, the optimum temeprature was ocnsidered to be about 5$0^{\circ}C$. The primary particles of the hydrous titanium dioxide (TiO2 gel) before aging were spherical, and their mean sizes were about 50nm. The similar shapes and sizes were observed with calcinatin at 40$0^{\circ}C$. The FT-IR spectrum of Ti-OH in the TiO2 gel powder appeared at around 3380cm-1, 1630cm-1 and 530cm-1. This gel powder was crystallized into the anatase type TiO2 at 300~40$0^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.31 no.7
• /
• pp.804-812
• /
• 1994

Stable PZT coating sol was prepared using chelating agent, ethylacetoacetate(EAcAc) by sol-gel processing under ambient atmosphere. Through FT-IR spectrum analysis on solution of each reaction step, formation of metal complex was confirmed and prepared PZT sol was stable over several months. Through TG-DTA, XRD, FT-IR spetrum analysis of PZT gel powder, it was understood that the addition of EAcAc could reduce the transition temperature to ferroelectric phase, due to the increased homogeneity by matching the hydrolysis and condensation rates by chelation. Single perovskite phase was obtained by the heat-treatment at 54$0^{\circ}C$ for 30 min. The film was coated on ITO-coated glass substrate by dip coating method. After heat-treatment, PZT thin film had thickness in the range of 20~130 nm. The maximum dielectric constant of its thin film at room temperature and 1 kHz was 128.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.150-152
• /
• 2005

$La_{0.2}Ca_{0.8}MnO_3$ colossal magnetoresistance (CMR) powders and pellets were synthesized by sol-gel process involving a stable metal chelate complex with acetylacetone. The structural changes of reaction mixture were monitored by FT-IR spectroscopy and X-ray diffractometry. The microstructure of sintered samples and the cation composition of gel powder were studied by FE-SEM/EDS and ICP-AES. The magnetic property was investigated as a function of temperature.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.54-58
• /
• 2002

Curdlan gel containing various hydrophobic materials was prepared. The homogenized suspension of curdlan and hydrophobic materials was healed at $100^{\circ}C$. The curdlan gel can contain hydrophobic material up to 27%(v/v). When gel was compressed, only water in the gel was removed. When immersed in water, the dried gel absorbed water and became the original wet gel. The syneresis of gel decreased with the concentration of hydrophobic material added. DHA content of dried gel was about 90%. $\beta$-cyclodextrin inclusion complexes containing DHA were prepared with addition of water and ethanol. X-ray diffractograms of complexes showed a specific peak at 7-$8^{\circ}C$ and FT-IR spectrum of complex showed a specific C=O peak at $1745\textrm{cm}^{-1}$. Inclusion complex containing DHA was microcapsulated with curdlan and pullulan.

• Journal of the Korean Society of Costume
• /
• v.58 no.5
• /
• pp.211-231
• /
• 2008

To conserve historic textiles, analyses of textile materials, pollutants and deterioration are prerequisite steps. Based upon analytical results, guides for conservation of historic textiles are established. In analyses of textile materials, pollutants and deterioration, there are chemical methods(burning, solubility and staining), physical methods(microscopy and density) and instrumental analysis(Fourier Transform Infrared Spectroscopy (FT-IR), Fourier Transform Raman Spectroscopy(FT-Raman), Gas Chromatography(GC), Mass Spectroscopy(MS), X-Ray Fluorescence (EDXRF, WDXRF), Energy Dispersive Spectroscopy(EDS), and X-Ray Diffraction(XRD), Tensile Testing Machine etc.). Combination of qualitative and quantitative analyses makes accurate diagnosis of textile condition possible. As examples of analyses and conservation of historic textiles, Chuninsan(19 century) similar to sunshade with handing down historic textile and golden decorative skirt(17 century) with excavated costume are taken.

• KSBB Journal
• /
• v.28 no.6
• /
• pp.356-365
• /
• 2013

The novel Aloe gels were prepared with dewatering and impregnation by soaking (DIS) processing of Aloe vera leaf slice at four different temperatures (25, 35, 45 and $55^{\circ}C$), using dehydration solution of 40% (w/v) polyethylene glycol (PEG4000). The PEG-impregnation to Aloe vera leaf slice during DIS was observed depending on immersion temperature, and the PEG-impregnated Aloe vera gel (PEG-i-AVG) obtained was characterized using $^1H$ NMR, FT-IR, GPC, XRD and TGA. The PEG-i-AVG had the higher levels of Aloe bioactives (glucomannan and O-acetyl contents) and better quality indices by $^1H$ NMR and FT-IR spectroscopy than those of native Aloe gel. Also, the obtained Aloe gel maintained the bimodal patterns in higher molecular weight region by GPC indicating no degradation of polysaccharide from native Aloe gel. The result observed by SEM confirmed a surface modification by forming the porous structure, and TGA result exhibited better thermal stability than that of native Aloe gel. XRD result revealed that the crystalline structure in Aloe gel was led by incorporation of PEG. Significant decrease of %insolubility and high enhancement of water solubility index were observed, respectively, and highly ordered conformation such as a helix structure was also indicated by Congo red reaction. We concluded that the modification effect for enhancing function of native Aloe gel was successfully obtained by DIS process using PEG as a dehydrating agent. These results suggested that this DIS process had a high potential for developing a new minimally processed product from Aloe vera leaf.

• Journal of Pharmacopuncture
• /
• v.20 no.1
• /
• pp.36-44
• /
• 2017

Objectives: The goal of this study was to characterize Suvarna Bhasma Parada Marit by using the Ayurvedic test parameters, physico-chemical tests, and various instrumentation techniques. Methods: Suvarna Bhasma, an Ayurvedic formulation manufactured as per Bharat Bhaishajya Ratnakar 5/8357 (BBR), has been studied using various instrumentation techniques: X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), laser particle size distribution (PSD) analysis, fourier transform infrared spectroscopy (FT-IR), and atomic absorption spectroscopy (AAS), and physico-chemical parameters, such as the loss on drying (LOD), loss on ignition (LOI), and acid insoluble Ash (AIA) were determined. In addition, Ayurvedic tests, such as Rekhapurnatva (enterable in the furrows of the fingers), Varitaratwa (floatable over water), Nirdhoomta (smokeless), Dantagre Kach-Kach (gritty particle feeling between the teeth), were performed. Results: The XRD study showed Suvarna Bhasma to be crystalline in nature and to contain more than 98% gold. The mean size of the gold crystallites was less than 10 microns, and the morphology was globular and irregular. Suvarna Bhasma contains gold as its single and major element, with EDAX and FT-IR spectra showing that it is more than 98% pure gold. The moisture content (LOD) is less than 0.5%, the LOI is less than 2%, and the AIA is not less than 95%. The Ayurvedic tests, as specified above, helped to confirm the quality of Suvarna bhasma prepared as per the text reference (BBR). Conclusion: This chemical characterization of Suvarna Bhasma performed in this study by using modern instrumentation techniques will be helpful in understanding its pharmacological actions and will help in establishing quality protocols and specifications to substantiate the safety, efficacy & quality of Suvarna Bhasma.