• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.205-211
• /
• 2010

The water-sewage cohesion agent(polyaluminumchloride(PAC)) and NaOH were used to synthesize $Al(OH)_3$. For various additions of NaOH, characteristics of the synthesized $Al(OH)_3$ was analysed by XRD, SEM and PSA. According to XRD analysis, small amount of NaOH(NaOH:PAC=15g:100g) resulted in amorphous form of $Al(OH)_3$. By increasing NaOH(NaOH:PAC=20g:100g), the mixture of gibbsite(37%), bayerite(35%) and boehmite(28%) were produced. By adding more NaOH(NaOH:PAC=25g:100g), binary mixtures of gibbsite(67%) and bayerite(33%) were formed. Finally, high addition of NaOH(NaOH:PAC=30g:100g) gave the high concentration of gibbsite(gibbsite:bayerite=83:17). Also, SEM analysis indicated that the product featured the plate form with 20 and 30g of NaOH addition. Furthermore it was found that the particle size of the product decreased with the addition of NaOH.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.141-147
• /
• 2005

Nanomaterial $TiO_2-SiO_2$ was synthesized by hydrolysis and condensation process using 2-propanol(2-PrOH) and was characterized by FT-IR, DSC, XRD and FE-SEM. FT-IR spectra were measured to investigate Ti-0-Si absorption peak. DSC thermal analysis results appllied to Ozawa equation were used to calculate to activation energy of crystallization. It was found that the changes of X-ray diffraction patterns and FWHM obtained XRD measurement depended on calcination temperature. In FE-SEM analysis, particle size changed by quantity changes of Ti-alkokide.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.252-253
• /
• 2014

This study is to XRD and image analysis of low carbon type recycled cement from waste concrete powder and cement raw materials. Waste concrete powder possible to low carbon type recycled cement in small part of additive materials. Also, low carbon type recycled cement using waste concrete powder is suitable for ordinary portland cement.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.3
• /
• pp.225-228
• /
• 2011

This study evaluated the mineral crystalline structure of an autogenous tooth bone graft material. The crystalline structures of the autogenous tooth bone graft material enamel (AutoBT E+), dentin (AutoBT D+), xenograft (BioOss), alloplastic material (MBCP), allograft (ICB) and autogenous mandibular cortical bone were compared using XRD. The XRD pattern of AutoBT dentin and ICB was similar to that of autogenous bone.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.61-62
• /
• 2023

In this study, the steel slag was immersed in CO₂ nano-bubble water by Electric arc funace it was accelerated aging was reviewed through XRD analysis. The main minerals of the electric furnace oxidized slag were spinel and gehlenite, and there was no change with the number of CO₂ nano-bubbles. Minerals such as larnite, calcio-olivine, agnetite, calcite, and spinel were distributed in electrically reduced slag, and the content of calcite more than doubled with CO₂ nano-bubble immersion. Therefore, it is judged that the acceleration aging of Electric arc funace reduced slag is effective according to the immersion of CO₂ nano-bubble.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.35-36
• /
• 2023

In this study, the hydration characteristics of conductive grout materials for each binder were investigated using XRD, and as a result of the experiment, the specimen with UFFA consumed more Ca(OH)₂ than the specimen with other binders, which is judged to have activated the pozzolanic reaction of UFFA, a high powder.

• Journal of Environmental Health Sciences
• /
• v.35 no.2
• /
• pp.130-142
• /
• 2009

This study compared FTIR with XRD method for the analysis of quartz by % recovery, coefficient of variation (CV) and influence of the interference. the results were as the following. 1. In FTIR method, the coefficient of determination ($r^2$) was 0.9998 in a calibration curve of $695\;cm^{-1}$, and the limit of detection was $4.9{\mu}g/sample$. 2. The highest recovery was $799\;cm^{-1}$ (98.2%). 3. The CVpooled of the FTIR method was approximately 10% in three wave numbers. 4. The analysis of qualitative and quantitative for quartz is difficult with mixed cristobalite and iron oxide. 5. In XRD method with rotating sample holder and LynxEye detector, the coefficient of determination was 0.9996 in a calibration curve, and the limit of detection was $5.9{\mu}g/sample$. 6. The recovery and CV pooled were 104.3%, and 11 %, respectively. 7. In muffle furnace ashing, the quartz weight decreased to 34% when the maximum weight of the iron oxide was more than eight times. In conclusion, the accuracy (% recovery) and precision (CV) of FTIR and XRD method for analyzing $\alpha$-quartz were similar. FTIR method was a disadvantage for sample matrix because it indicates possibility of interference. However, XRD method distinguished specific crystalline forms of silica, and the majority of silicate minerals. In addition, XRD method recommend filter dissolution to pretreatment method.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.228-228
• /
• 2003

고강성 탄소섬유는 높은 비강도 및 고 강성 특성 때문에 탄소-탄소 복합재료의 가장 우수한 강화재로 각광을 받고 있다. 이 섬유는 미세 결정립의 높은 이방성을 나타내며, 이러한 높은 흑연화 특성은 기계적, 전기적, 전기적 그리고 화학적 특성 등을 좋게한다. 이러한 모든 방면에서의 우수한 특성 때문에 항공우주 재료분야에 의심 없이 가장 우수한 재료로 고려되고 있다. 이렇게 가벼우면서 고온강도가 요구되는 재료로써 탄소재료가 이용되면서 rocket의 nozzle이나 nosecone으로의 응용에는 고온 산화가 중요한 연구주제로 대두되어 왔다. 탄소재료의 산화반응은 결정구조 인자 및 그 배열에 가장 큰 영향을 받는다고 알려져 있는데, 출발원료 및 제조 조건에 따라 그 구조 및 배열이 현격하게 달라진다. 탄소재료의 구조 해석은 주로 TEM과 XRD를 이용해 왔다. 많은 연구자들은 오래 전부터 탄소재료 연구에 TEM에서 얻은 상이 불확실하고 문제가 있다고 보고하였고, 최근 TEM 장치의 발달과 더불어 실제 구조를 얻기가 가능함을 보여주고 있다 그러나 TEM 시편은 여전히 작고 시편으로부터 얻는 정보는 불과 nm 수준이다. 따라서 일반적으로 TEM으로 얻은 정량적인 정보는 불과 특정한 점에서의 정보이기 때문에 여전히 논란의 소지가 많다. XRD는 탄소재료의 미세구조 해석을 위하여 가장 널리 이용되는 분석기기이다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.81-82
• /
• 2018

The structure of the RC structure is actively reinforcing the structure of the building which has suffered from aging, artificial and natural damage of the building. Among various reinforcement methods, epoxy adhesive is used to attach FRP in FRP reinforcement method which is reinforcing by attaching FRP to the structural part. At this time, the epoxy adhesive having a low critical temperature has a sudden adhesive failure upon exposure to heat, and thus, the development of an inorganic fireproof adhesive having a high critical temperature has progressed. Therefore, in this study, the compositional change of inorganic fire - resistant adhesive exposed to high temperature heat was analyzed by XRD.

• The Korean Journal of Malacology
• /
• v.31 no.4
• /
• pp.279-283
• /
• 2015

This study investigated spectroscopic characteristics of shell crystals of eight marine bivalve species using X-ray diffraction (XRD) analysis; moreover, the Family level relatedness of shellfish was investigated. In XRD analysis, the shells of Ruditapes philippinarum, Meretrix lusoria, Anadara granosa, and Fulvia mutica were found to have orthorhombic aragonite $CaCO_3$ crystals, while shells of Patinopecten yessoensis and Crassostrea gigas had trigonal-rhombohedral calcite crystals. The shells of Mytilus coruscus and Atrina pectinata were determined to have a mixture of aragonite and calcite crystals. XRD information revealed the Family level-specific characteristics of shellfish; the results agreed with the current taxonomic system. In conclusion, spectroscopic characteristics of shell crystals indicated Family-level characteristics of shellfish and suggested a more intense species-level investigation; this technology may be useful in identifying shellfish species using small quantities of shells.