• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.128-137
• /
• 2005

In this study we measured the amount of light energy that was projected through the tooth material and analyzed the degree of polymerization by measuring the surface hardness of composites. For polymerization, Optilux 501 (Demetron, USA) with two types of light guide was used: a 12 mm diameter light guide with 840 nW/$cm^2$ light intensity and a 7 mm diameter turbo light guide with 1100 nW/$cm^2$. Specimens were divided into three groups according to thickness of penetrating tooth (1 mm, 2 mm, 0 mm). Each group was further divided into four subgroups according to type of light guide and curing time (20 seconds, 40 seconds). Vickers' hardness was measured by using a microhardness tester. In 0 mm and 1 mm penetrating tooth group, which were polymerized by a turbo light guide for 40 seconds, showed the highest hardness values. The specimens from 2 mm penetrating tooth group, which were polymerized for 20 seconds, demonstrated the lowest hardness regardless of the types of light guides (p < 0.05). The results of this study suggest that, when projecting tooth material over a specified thickness, the increase of polymerization will be limited even if light intensity or curing time is increased.

• Research in Community and Public Health Nursing
• /
• v.15 no.4
• /
• pp.587-599
• /
• 2004

Purpose: The purpose of this study is to compare abdomen-fat rate, life style and social-support between normal weight women and obese women. Method: 304 women objectives from their 30 to 59 years of age were selected living in Je-chon city, Chung-Buck province and their height and weight were measured from April 1st to June 30th, 2003. Data were classified into low-weight group ($18.5kg/m^2$), normal-weight group ($18.5{\sim}22.9kg/m^2$), over weight group ($23{\sim}24.9kg/m^2$), and obese group ($25kg/m^2$) following the Korean Conference of Obesity, 2001. in which 119 people in the normal weight group and 91 people in the obese group, i.e. total 210 people were analyzed in sequence. Using SPSS Win 10.1 Program, frequency and percentile, and by ANOVA, $X^2-test$ and t-test were treated. Results: The average age of obese women was 46.68 distributing 40.7% of forties and 39.6% of fifties while normal-weight women were average 41.73-year old distributing 53.8% of forties and 34.5% of thirties, which revealed aged in obese women. The body fat rate of obese women averaged $37.52{\pm}4.17%$, in which 98.9% of obese women and 21.0% of normal weight women with a more than 30% of body-fat rate resulted in a higher body-fat rate in obese women. The waists of obese women averaged $88.37{\pm}8.22cm$, in which more than 85cm showed in obese women of 68.2% and normal weight women of 7.6% indicating a higher waist-fat rate in obese women. The abdomen-fat rate of more than 0.85 of waist vs hip-fat showed 74.7% in obese women and 58.4% in normal weight women, indicating a higher abdomen-fat rate in obese women. Obese women and normal weight women showed significant differences in education level, number of children, religion, menstrual status, and mother's weight. Especially, obese women ate hotter or saltier food than normal weight women preferring meat. However, no significant differences appeared in marital status, social economic status. occupation. eating habits. smoking. drinking and physical exercise. Social support levels showed a lower rate in obese women than in normal weight women, indicating a statistically significant difference (p<.05). Observing areas of social support, obese women showed lower rates in attachment/intimacy, social integrity, opportunity of foster and confidence in value except help and instruction, which indicated a statistically significant difference (p<.05). Social support for obese women showed significant differences in age, education level, social hierarchy, religion and menstrual status. Obese women were more negative than normal weight women in health recognition, indicating a statistically significant difference (p<.01). Normal weight women showed higher health recognition when provided high social support and significantly low (p<.01) health recognition when provided low social support. However, there was no significant difference in health recognition in obese women whether high or low social support was given. The health recognition of obese women showed significant differences in age, education level, social hierarchy, number of children, menstrual status, physical exercise, eating habits, eating taste and preference of food. Conclusion: Obese women showed elder than normal-weight women, higher body-fat rate and abdomen-fat rate, lower social support, and a tendency to more negative health recognition. Therefore, providing weight-control programs for the treatment of obesity and prevention of recurrence for obese women to prevent progressing to adult disease and promote a healthy life, we suggest that better eating habits and the encouragement of regular physical exercise should be included, as well as total approachment on change of health recognition and social support would be needed.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.5
• /
• pp.558-567
• /
• 2000

Background : Recently, serologic techniques for tuberculosis have been developed and some of them, which are focusing on detection of serum antibodies mainly directed against specific 38-kDa Mycobacterium tuberculosis, have already been introduced into the markel. In this study, diagnostic significance of a new serologic test(ELISA kit) for pulmonary tuberculosis was evaluated. Method : Serologic test with newly developed ELISA kit was performed upon 474 individuals, who include 333 active pulmonary tuberculosis patients, 80 healthy cases, and 61 tuberculosis contact cases. This serologic test was based on the ELISA technique and designed to detect antibodies to mixed complex antigens including 38-kDa, which were developed by Erume Biotech Co., Seoul. Active pulmonary tuberculosis was diagnosed by sputum AFB smear and culture methods. Results : The seropositivities using this ELISA kit were 82.1% and 73.6% in smear-positive and negative groups among active pulmonary tuberculosis, respectively. And, it also showed that seronegativities were 97.5% and 85.2% in healthy and contact groups, respectively. As a whole, the results of our study using the ELISA kit as a diagnostic method for pulmonary tuberculosis showed 80.0% sensitivity for active pulmonary tuberculosis, 97.5% specificity, 96.1% positive predictive value, and 65.0% negative predictive value when the prevalence of tuberuclosis in the samples was 60.1%. Conclusion : Our results reveal that the detection of antibody its reaction with 38-kDa antigen of M. tuberculosis is not sufficient to be accepted as single diagnostic method for pulmonary tuberculosis. However, they suggest that ELISA kit may be considered as an adjunctive test to standard diagnostic techniques of pulmonary tuberculosis.

• Tuberculosis and Respiratory Diseases
• /
• v.55 no.4
• /
• pp.370-377
• /
• 2003

Background : Pneumocystis carinii pneumonia (PCP) is one of the most common cause of infection in patients with HIV infection. Recently, the incidence of PCP have been increasing in immunocompromised hosts without HIV infection. We compared the clinical characteristics of PCP between HIV infected and non-infected persons. Patients and Methods : We retrospectively reviewed the charts of 25 patients diagnosed as PCP from 1996 to 2002. Age, sex, underlying conditions, use of immunosuppressants, clinical courses, laboratory findings, treatment and prognosis were compared between HIV infected and non-infected persons. Results : Twenty-five patients with PCP were identified. 16 were HIV infected, and 9 were HIV non-infected. The mean age of overall patients was $43.4{\pm}13.2$ years. Underlying conditions in HIV non-infected persons were hematologic malignancy (7 cases), solid organ transplant (1 case), and autoimmune disease (1 case). Seven cases (77.8%) of HIV non-infected persons had a history of steroid use. Mean duration of symptoms was longer in HIV infected persons than in HIV non-infected persons, but it was not statistically significant. PaO2 was lower in HIV infected persons ($61.2{\pm}16.9$ mmHg vs. $65.4{\pm}15.4$), but it was not statistically significant. Chest X ray showed typical ground glass opacity in 12 cases (75%) of HIV infected persons and in 4 cases (44.4%) of HIV non-infected persons. Twelve cases (75%) of HIV infected persons were treated with steroid, as were 6 cases (66.7%) of HIV non-infected persons. Ventilator care was needed in 6 cases (37.5%) of HIV infected persons and in 2 cases (22.2%) of HIV non-infected persons. Mortality of HIV infected persons was 50%, and that of HIV non-infected persons was 11.1%. Conclusions : PCP showed some different clinical characteristics between HIV infected and non-infected persons. Prospective studies regarding the risk factors of PCP, prophylaxis, treatment and prognosis in HIV infected and non-infected persons are warranted.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.1
• /
• pp.19-24
• /
• 2004

Background : It is difficult to differentiate between tuberculous pneumonia and Community Acquired Pneumonia, so the diagnosis and treatment of tuberculous pneumonia can be delayed frequently. In this study, we attempted to retrospectively evaluate the clinical and radiologic characteristics of tuberculous pneumonia. Methods : We conducted a retrospective analysis of clinical characteristics of 58 patients diagnosed with tuberculous pneumonia from Nov. 1997 to May 2001 at Korea university kuro hospital. Result : The male to female ratio was 1:1 and the mean age at diagnosis was $54.5{\pm}18.6$ years. Fifty five patients were confirmed microbiologically and three patients pathologically. There were 20 patients(34.5%) who had diabetes mellitus(8cases), chronic obstructive pulmonary disease(3cases), malignancy(3cases), bronchiectasis(2cases), chronic renal failure(1cases) or long term history of corticosteroid treatment(3cases). Many patients had multilobar infiltration in chest X-ray, dominantly in the lower lobe. thirty two patients(55.2%) had infiltration in more than 2 lobes and 5 patients in more than 4 lobes. The significant correlation between the diabetes mellitus and the infiltrated Rt lower lobe(RLL) was found on the borders of confidence limit.(P=0.07<0.1). There was significant correlation between woman and infiltrated lobe(RML, RLL, LLL) excluding the both upper lobe(P=0.029). Conclusion : We must consider tuberculous pneumonia when lobar pneumonia with consolidation resistant to antibiotics, especially in the patients who have diabetes mellitus, chronic obstructive pulmonary disease, malignancy, bronchiectsis, chronic renal failure or long term history of corticosteroid treatment.

• Tuberculosis and Respiratory Diseases
• /
• v.72 no.1
• /
• pp.8-14
• /
• 2012

Background: Although airway obstruction in chronic obstructive pulmonary disease (COPD) is due to pathologic processes in both the airways and the lung parenchyma, the contribution of these processes, as well as other factors, have not yet been evaluated quantitatively. We therefore quantitatively evaluated the factors contributing to airflow limitation in patients with COPD. Methods: The 213 COPD patients were aged >45 years, had smoked >10 pack-years of cigarettes, and had a post-bronchodilator forced expiratory volume in one second ($FEV_1$)/forced vital capacity (FVC) <0.7. All patients were evaluated by medical interviews, physical examination, spirometry, bronchodilator reversibility tests, lung volume, and 6-minute walk tests. In addition, volumetric computed tomography (CT) was performed to evaluate airway wall thickness, emphysema severity, and mean lung density ratio at full expiration and inspiration. Multiple linear regression analysis was performed to identify the variables independently associated with $FEV_1$ - the index of the severity of airflow limitation. Results: Multiple linear regression analysis showed that CT measurements of mean lung density ratio (standardized coefficient ${\beta}$=-0.46; p<0.001), emphysema severity (volume fraction of the lung less than -950 HU at full inspiration; ${\beta}$=-0.24; p<0.001), and airway wall thickness (mean wall area %; ${\beta}$=-0.19, p=0.001), as well as current smoking status (${\beta}$=-0.14; p=0.009) were independent contributors to $FEV_1$. Conclusion: Mean lung density ratio, emphysema severity, and airway wall thickness evaluated by volumetric CT and smoking status could independently contribute to the severity of airflow limitation in patients with COPD.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1285-1292
• /
• 2009

Large single crystals of zeolite, |$Na_{75}$|[$Si_{117}Al_{75}O_{384}$]-FAU (Na-Y, Si/Al = 1.56), were synthesized from gels with composition of 3.58Si$O_2$ : 2.08NaAl$O_2$ : 7.59NaOH : 455$H_2$O : 5.06TEA : 2.23TCl. One of these, a colorless single-crystal was ion exchanged by allowing aqueous 0.02 M CsOH to flow past the crystal at 293 K for 3 days, followed by dehydration at 673 K and 1 ${\times}\;10^{-6}$ Torr for 2 days. The crystal structure of fully dehydrated partially $Cs^+$-exchanged zeolite Y, |$Cs_{45}Na_{30}$|[$Si_{117}Al_{75}O_{384}$]-FAU per unit cell (a = 24.9080(10) $\AA$) was determined by single-crystal X-ray diffraction technique in the cubic space group Fd $\overline{3}$ m at 294(1) K. The structure was refined using all intensities to the final error indices (using only the 877 reflections with $F_o\;>\;4{\sigma}(F_o))\;R_1$ = 0.0966 (Based on F) and $R_2\;=\;0.2641\;(Based\;on\;F^2$). About forty-five $Cs^+$ ions per unit cell are found at six different crystallographic sites. The 2 $Cs^+$ ions occupied at site I, at the centers of double 6-ring (D6Rs, Cs-O = 2.774(10) $\AA$ and O-Cs-O = 88.9(3) and 91.1(3)$^o$). Two $Cs^+$ ions are found at site I’ in the sodalite cavity; the $Cs^+$ ions were recessed 2.05 $\AA$ into the sodalite cavity from their 3-oxygen plane (Cs-O = 3.05(3) $\AA$ and O-Cs-O = 77.4(13)$^o$). Site-II’ positions (opposite single 6-rings in the sodalite cage) are occupied by 7 $Cs^+$ ions, each of which extends 2.04 $\AA$ into the sodalite cage from its 3-oxygen plane (Cs-O = 3.067(11) $\AA$ and O-Cs-O = 80.1(3)$^o$). The 26 $Cs^+$ ions are nearly three-quarters filled at site II in the supercage, being recessed 2.34 $\AA$ into the supercage (Cs-O = 3.273(8) $\AA$ and O-Cs-O = 74.3(3)$^o$). The 4 $Cs^+$ ions are found at site III deep in the supercage (Cs-O = 3.321(19) and 3.08(3) $\AA$), and 4 $Cs^+$ ions at another site III’ (Cs-O = 2.87(4) and 3.38(4) $\AA$). About 30 $Na^+$ ions per unit cell are found at one crystallographic site; The $Na^+$ ions are located at site I’ in the sodalite cavity opposite double 6-rings (Na-O = 2.578(11) $\AA$ and O-Na-O = 97.8(4)$^o$).

• Resources Recycling
• /
• v.2 no.2
• /
• pp.27-38
• /
• 1993

In this study, we investigated the grinding and sedimentation(elutriation) process of the dusts for the effective separation of high purity iron and iron oxides. For characterization of the dust, particle size distribution and chemical composition, were examined. The results obtained in this study may be summarized as follows : 1. The converter CF(clarifier) dust of the Pohang 1st, 2nd steel making factory and EC(Evaporation Cooler), EP(Eltrostatic precititator) dust of the Kwangyang 2nd steel making factory are composed $\alpha$-Fe(21~50%), FeO(wustite)$Fe_3$$O_4$(magnetite), $Fe_2$$O_3$, CaO, $Al_2$$O_3$, $SiO_2$, and etc. 2. Pure iron has ductile characteristic in nature, particle size of the pure iron increase by increasing the grinding time. On the other hand, it is conformed that bo고 particles of hematite and magnetite become less than 325 mesh after 10 minutes grinding. 3. By applying the elutriation technique for the EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.17% of pure Fe was recovered with 37.8% yield at grinding time for 40 minutes. 4. By applying the elutriation technique for the CF dust of the Pohang 2nd steel making factory, the iron powder of high content more than 98.38% of pure Fe was recovered with 44.42% yield at grinding time for 40 minutes. 5. When magnetic separation was performed using plastic bonding magnet of 70 gauss, more than 98% Fe grade of iron powder was recovered in the size range +65 -200 mesh but the recovery of it was low.

• Clean Technology
• /
• v.21 no.1
• /
• pp.68-75
• /
• 2015

In this study, we investigated the structure and properties of a highly heat conductive metal-ceramic core-shell CoAl₂O₄@Al micro-composite for heterogeneous catalysts support. The CoAl₂O₄@Al was prepared by hydrothermal surface oxidation of Al metal powder, which resulted in the structure with a high heat conductive Al metal core encapsulated by a high surface area CoAl₂O₄ shell. For comparison, CoAl₂O₄ was also prepared by co-precipitation method and also utilized for a catalyst support. Rh catalysts supported on CoAl₂O₄@Al and CoAl₂O₄ were prepared by incipient wetness impregnation and characterized by N₂ adsorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), CO chemisorption, and temperature-programmed reduction (TPR). The properties of catalysts were investigated for glycerol steam reforming reaction for hydrogen production at 550 ℃. Rh/CoAl₂O₄@Al exhibited about 2.8 times higher glycerol conversion turnover frequency (TOF) than Rh/CoAl₂O₄ due to facilitated heat transport through the core-shell structure. The CoAl₂O₄@Al and CoAl₂O₄ also showed some catalytic activities due to a partial reduction of Co on the support, and a higher catalytic activity was also found on the CoAl₂O₄@Al core-shell than CoAl₂O₄. These catalysts, however, displayed deactivation on the reaction stream due to carbon deposition on the catalysts surface.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.65-71
• /
• 1998

The aims are to evaluate the effects of an 1.0 cm acrylic plate and SSD on the dose profile and depth dose distribution of 9 MeV electron beam and to analyse adequacy for using an acrylic plate to reduce energy of electron beams. An acrylic plate of 1.0 cm thickness was used to reduce energy of 9 MeV electron beam to 7 MeV. The plate was put on an electron applicator at 65.4 cm distance from x-ray target. The size of the applicator was 10${\times}$l0cm at 100 cm SSD. For 100cm, l05cm and 110cm SSD, depth dose on beam axis and dose profiles at d$\_$max/ on two principal axes were measured using a 3D water phantom. From depth dose distributions, d$\_$max/, d$\_$85/, d$\_$50/ and R$\_$p/, surface dose, and mean energy and peak energy at surface were compared. From dose profiles flatness, penumbra width and actual field size were compared. For comparison, 9 MeV electron beams were measured. Surface dose of 7 MeV electron beams was changed from 85.5% to 82.2% increasing SSD from 100 cm to 110 cm, and except for dose buildup region, depth dose distributions were independent of SSD. Flatness of 7 MeV ranged from 4.7% to 10.4% increasing SSD, comparing 1.4% to 3.5% for 9 MeV. Penumbra width of 7 MeV ranged from 1.52 cm to 3.03 cm, comparing 1.14 cm to 1.63 cm for 9 MeV. Actual field size increased from 10.75 cm to 12.85 cm with SSD, comparing 10.32 cm to 11.46 cm for 9 MeV. Virtual SSD's of 7 and 9 MeV were respectively 49.8 cm and 88.5cm. In using energy reducer in electron therapy, depth dose distribution were independent of SSD except for buildup region as well as open field. In case of using energy reducer, increasing SSD made flatness to deteriorate more severely, penumbra width more wide, field size to increase more rapidly and virtual SSD more short comparing with original electron beam. In conclusion, it is desirable to use no energy reducer for electron beam, especially for long SSD.