• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 1994.07a
• /
• pp.23-24
• /
• 1994

본 연구는 성숙과의 저장중에 세포벽분해효소가 세포벽을 분해해서 물성의 변화를 유발함으로 일어나는 과실의 연과가 품질과 저장성의 저하 뿐만 아니라 영양적, 경제적 손실을 초래한다는 점을 고려하여 대추의 성숙중에 일어나는 연화현상을 연구하고자 성숙에 따른 경도, 세포벽분해효소의 활성, 세포벽 다당류 pectin질, 비섬유성 중성당 및 조직의 변화를 조사하였다. 경도는 대추의 숙성에 따라 감소하였고, polygalacturonase와 $\beta$-galactosidase의 활성은 각각 변색기와 완숙기에 나타난 이후 급격히 증가하였다. 세포벽 다당류인 pectin질과 알칼리 지용성 hemicellulose는 완숙기가지 증가햐였으나 cellulose는 완숙기에 산가용성 hemicellulose와 cellulose를 제외한 세포벽 다당류의 함량은 다소 감소하였다. 대추의 세포벽 비섬유성 중성당으로 rhamnose, arabinose, xylose, mannose, galactose, glucose가 동정되었고, 성숙동안에 pectin질에서는 arabinose, mannose, galactose와 총 비섬유성 중성당의 함량이 감소하였고, 산가용성 hemicellulose에서는 xylose와 mannose가 뚜렸하게 증가하였으나 중성당은 변화없었으며, 알칼리 가용성 hemicellulose에서는 성숙에 따른 변화가 거의 없었다. pectin질의 경우 수용성 pectin, EDTA 용해성 pectin 및 총 pectin은 성숙중에 증가하는 경향이있으나 불용성 pectin은 감소하는 경향이였으며 과숙기에는 불용성 psctin EDTA용해성 pectin 및 총 pectin의 함량은 모두 현저히 감소하였다. 대추의 성숙중 조직에서는 pectin질로 구성된 중충의 붕괴현상이 뚜렸하게 나타났다.발이 절실히 필요한 실정이다. 이러한 배경으로 본 강연에서는 효소적갈변 저해제의 개발과 그들의 식품가공에의 적용 현환 및 화장품, 의약품으로의 응용에 대해 설명하고자 한다.L주에 비해 S주는 수정후 용과가 더 심하다. 9) 화분관의 행동은 수정력과 완전히 일치된다. 즉 L-selfing, $L{\times}L$, S-selfing, $S{\times}S$등의 부적법 수분에서는 화분관은 화주의 미중에서 정지되지만 $L{\times}S$, $S{\times}L$,에서는 수분 약 40-50분 후이면 화분관은 자방까지 도달된다. 10) S주는 웅본으로 오인되어 있지만 인위적법수분을 하면 수정력이나 화분관의 행동은 L주에서와 동일하다. 11) S화분은 완전하지만 L화분은 약 70%가 내용공허한 Adortive pollen 이다. 12) L화분중 나머지 30%도 S화분에 비해서 염색도가 낮은것이 많고 S화분 같이 농염되는 것은 극히 소수이다. 13) 본장물은 분화가 고도로 진행된 전형적인 이형예작물이여 마치 Dimorphism 에서 Dioecious 에로 이행되는 수가 있다는 것을 표시하는 증거가 되는 것 같다. 다소 높은 산소농도 3%~5% 이산화탄소 농도 5~8%에서 저장하는 것이 효과적일 것으로 판단되었다.철쭉군목으로 대표되나 군단이 하의 군목들은 다소 차이를 보이는 것으로 나타났다. 중간상인이론의 수정이 필요하다고 본다.가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성요 소를 지닌 병렬적 합성어([

• Journal of the Korean Dietetic Association
• /
• v.9 no.4
• /
• pp.307-315
• /
• 2003

This study was to investigate the relation of nutrients intake, health status, and bone mineral density in middle-aged women. Daily nutrients intake were analyzed by convenient method. The BMD of subjects were measured by Dual Energy X-ray Absorptiometry(DEXA). BMD was measured at the spine(vertebrae L2-L4) and femur(neck, Ward's triangle and trochanter). The nutrients intake of subjects were higher than recommended dietary allowances(RDA) except for calorie, iron, calcium, vitamin B1. Nutrients intake of vitamin A(p<0.05), iron(p<0.01), vitamin $B_2$(p<0.05), niacin(p<0.05), and vitamin C(p<0.05) between $\leq$49 yr group and $\geq$50 yr group. Mean daily intake of calcium was much less than the Korean RDA, 78.5% in $\leq$49 yr group and 77.3% in $\geq$50 yr group. 35.8% of the subjects under 50 years of age($\leq$49 yr group) and 77.4% of the subjects from 50 years up($\geq$50 yr group) were classified as osteopenia or osteoporosis. BMD of L2-L4 were positively correlated with height(p<0.05), weight(p<0.05) and BMI(p<0.05). BMD of femoral neck was positively correlated with BMI(p<0.05), BMD of Ward's triangle was positively correlated with weight(p<0.001). But BMD of L2-L4 and femoral neck were negatively correlated with age(p<0.05), menarche(p<0.05). BMD of Ward's triangle was negatively correlated with age(p<0.001). The BMD of L2-L4 were positively correlated with animal protein(p<0.05), calcium(p<0.05) and iron(p<0.05). The BMD of femoral neck was positively correlated with animal protein(p<0.05). The BMD of Ward's triangle was positively correlated with animal protein(p<0.001) and iron(p<0.001). The above results suggest that it should be difficult to prevent middle-aged women's bone destruction through nutrients intake. Further investigation is necessary to prove the mutual relations between BMD, exercise, and calcium intake. Therefore, middle-aged women will need proper exercise as well as Ca supplementation in order to prevent osteoporosis with aging.

• Korean Journal of Cleft Lip And Palate
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2010

구순구개열은 선천성 악안면 기형중에서 발생률이 가장 높은 질환이며 특히 동양인에게 높은 빈도로 발생된다. 그리고 순구개열에서는 파열부 조직의 선천적 상실과 파열부 봉합 수술 후 형성된 반흔에 의한 상악골의 열성장과 상악궁의 협착, 코의 형태 이상, 등과 함께 치아의 수, 크기와 형태 및 맹출 이상도 높은 빈도로 동반된다. 선천성 치아 발육 이상이 구순열 또는 구개열 가진 환자에게서 종종 보고되고 있다. 이런 치아 이상은 과잉치, 결손치, 크기, 형태, 맹출시기, 법랑질 광화 등의 많은 특징을 포함한다. 이번 연구의 목적은 다음과 같다. 1. 구순열 또는 구개열을 가진 환자의 선천성 치아 결손 발병률을 결정하여 정상인과 비교하는 것이다. 2. 상하악에서 파열이 있는 부위와 없는 부위의 제2소구치 결손가능성을 비교 하는 것이다. 구강악안면외과에서 구순구개열로 진단한 환자 중 2005년 1월~2009년 8월까지 전북대학교 구강악안면외과에서 치조열부위 자가골이식수술을 받은 32명의 환자로 초진시의 교정 chart, 구강악안면외과 chart, x-ray(파노라마, 치근단사진, 교합사진(상악), 석고 모델, 구강내 외 임상사진을 사용하여 순구개열군 별로 매복치, 과잉치, 결손치, 왜소치의 유무와 위치를 조사하여 다음과 같은 결론을 얻었다. 1. 결손치는 비교적 높은 발생빈도(53.1%)를 보였으며, 치아별 발생빈도는 상악 측절치와 상악 제2소구치, 하악 제2소구치 순이었다. 구순구개열군이 구순치조열군에 비해 발생률이 높게 나타났다. 그리고 구순구개열군 내에서 양측성이 편측성에 비해 결손치의 발생률이 높게 나타났다. 2. 왜소치는 71.6%에서 발견되었으며, 치아별 발생빈도는 상악측절치에서 가장 많았다. 구순치조열군이 구순구개열군에 비해 발생률이 높게 나타났다. 3. 치조열을 가진 환자에 있어 상/하악간 제2소구치의 선천적 결손에 유의한 차이가 있었다. 4. 구순구개열이 인접한 상악측절치의 발생중인 미성숙 조직에 영향을 미치며 파열부위와 좀 더 떨어져 있는 상악 제2소구치에도 일정한 영향을 미침을 이번 연구를 통해 다시 확인할 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.68.1-68.1
• /
• 2012

The best part of graphene is - charge-carriers in it are mass less particles which move in near relativistic speeds. Comparing to other materials, electrons in graphene travel much faster - at speeds of $10^8cm/s$. A graphene sheet is pure enough to ensure that electrons can travel a fair distance before colliding. Electronic devices few nanometers long that would be able to transmit charge at breath taking speeds for a fraction of power compared to present day CMOS transistors. Many researches try to check a possibility to make it a perfect replacement for silicon based devices. Graphene has shown high potential to be used as interconnects in the field of high frequency electrical devices. With all those advantages of graphene, we demonstrate characteristics of electrical and optical properties of graphene such as the effect of graphene geometry on the microwave properties using the measurements of S-parameter in range of 500 MHz - 40 GHz at room temperature condition. We confirm that impedance and resistance decrease with increasing the number of graphene layer and w/L ratio. This result shows proper geometry of graphene to be used as high frequency interconnects. This study also presents the optical properties of graphene oxide (GO), which were deposited in different substrate, or influenced by oxygen plasma, were confirmed using different characterization techniques. 4-6 layers of the polycrystalline GO layers, which were confirmed by High resolution transmission electron microscopy (HRTEM) and electron diffraction analysis, were shown short range order of crystallization by the substrate as well as interlayer effect with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups on its layers. X-ray photoelectron Spectroscopy (XPS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation, and Fourier Transform Infrared spectroscopy (FTIR) and XPS analysis shows the changes in oxygen functional groups with nature of substrate. Moreover, the photoluminescent (PL) peak emission wavelength varies with substrate and the broad energy level distribution produces excitation dependent PL emission in a broad wavelength ranging from 400 to 650 nm. The structural and optical properties of oxygen plasma treated GO films for possible optoelectronic applications were also investigated using various characterization techniques. HRTEM and electron diffraction analysis confirmed that the oxygen plasma treatment results short range order crystallization in GO films with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups. In addition, Electron energy loss spectroscopy (EELS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation and XPS analysis shows that epoxy pairs convert to more stable C=O and O-C=O groups with oxygen plasma treatment. The broad energy level distribution resulting from the broad size distribution of the $sp^2$ clusters produces excitation dependent PL emission in a broad wavelength range from 400 to 650 nm. Our results suggest that substrate influenced, or oxygen treatment GO has higher potential for future optoelectronic devices by its various optical properties and visible PL emission.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.102-106
• /
• 2006

Magnetic nanoparticles can be used for a variety of biomedical applications. They can be used in the targeted delivery of therapeutic agents in vivo, in the hyperthermic treatment of cancers. in magnetic resonance (MR) imaging as contrast agents and in the biomagnetic separations of biomolecules. We have synthesized magnetite $(Fe_3O_4)$ nanoparticles using chemical coprecipitation technique with sodium oleate as surfactant. Nanoparticle size can be varied from 2 to 8nm by controlling the sodium oleate concentration. Magnetite phase nanoparticles could be observed from X-ray diffraction. Magnetic colloid suspensions containing particles with sodium oleate and chitosan have been prepared. Nanoparticles, both oleate-coated and chitosan-coated, have been characterized by several techniques. Atomic farce microscope (AFM) was used to image the coated nanoparticles. Magnetic hysteresis measurement were performed using a superconducting quantum interference device (SQUID) magnetometer at room temperature to investigate the magnetic properties of the magnetite nanoparticles. The SQUID measurements revealed superparamagnetism of nanoparticles.

• Korean Journal of Veterinary Research
• /
• v.41 no.2
• /
• pp.243-252
• /
• 2001

Milk constituents and somatic cell count (SCC) were analysed for 4,059 milk samples from 178 dairy farms from April to December in 1999. Correlations among each milk constituents, milk urea (MU) concentration and SCC in association with lactation stage, milk yield and parity, and balancing status of nutrients' supplies were analysed, and the results are summarized as follows; Averages of milk fat percent, total solids percent and milk yield were $3.72{\pm}0.91%$, $12.50{\pm}1.31%$ and $23.80{\pm}8.54kg$, respectively, whereas those were significantly lower during the summer season. In contrast, average of MU concentration was $0.0361{\pm}0.0006%$ which was significantly higher during the summer season. With milk yield, concentrations of fat, protein and SCC in milk decreased but concentrations of lactose and urea in milk and body condition score (BCS) were not altered. Concentrations of fat, protein, lactose, total solids, SNF, and urea in milk were significantly affected by stage of lactation ($P{\leq}0.0001$) but SCC was not changed. Parity of dairy cows had a significant effect on concentrations of fat ($P{\leq}0.02$), lactose ($P{\leq}0.0001$), total solids ($P{\leq}0.002$), and SNF ($P{\leq}0.0001$) in milk and milk yield ($P{\leq}0.0005$) but did not change concentrations of urea and protein in milk. Somatic cell count had significant positive correlationship with percentages of fat, protein and total solids ($P{\leq}0.0001$), respectively, but had negative correlationship with percentages of urea and lactose in milk and milk yield ($P{\leq}0.0001$). Milk urea concentration was negatively correlated with concentrations of protein, fat, total solids, and SNF in milk and milk yield ($P{\leq}0.0001$) and, according to regression analysis using milk urea concentration and SCC, following equation was obtained; $Y(MU)=3.688{\times}10^{-2}-4.04{\times}10^{-7}{\times}X(SCC{\times}1,000)(r^2=0.0038$, $P{\leq}0.0001$). We studied balance between protein and energy supplies to dairy cows in each farm based upon milk urea and protein concentrations, and results showed that 137 of total 178 farms fed cows unbalanced amounts of dietary protein and energy.

• Korean Journal of Digital Imaging in Medicine
• /
• v.14 no.2
• /
• pp.39-46
• /
• 2012

Purpose : The purpose of this study was to reduce Entrance Surface Dose and maintain image quality by changing Source to Image receptor Distance. And we'd like to compare ESD on this study to DRLs in other contries. Materials and Methods : We used indirect DR system(Definium 8000, General Electric, USA)and phantom(ART-200X, Flukebiomedical, USA),glass dosimeters(GD-352M, Asahi Techno Glass, Japan)for this study. The imagies were obtained throuh 80kVp fixed, and different tube currents using AEC mode in $16{\times}16$(inch) field size and changing Source to Image receptor Distance from 100 cm to 130 cm per 10 cm unit. The phantom with attaching 5 glass dosimeters on abdomonal skin was set at supine and erect position as a anterioposterial projection on detector For measuring Entrance Surface Dose. Image analysis was conducted by histograms of Image J(1.46r) which was given from National Institutes of Health(NIH). Results : Due to inverse square law of distance, the tube currents were increasing 42.6 % in supine position and 32.6 % in erect position according to the change of Source to Image receptor Distance. While Entrance Surface Doses were rapidly decreasing 14.2 % in supine position and 29.4 % in erect position according to the change of Source to Image receptor Distance. As the results of histogram using Image J, pixel mean values from 100 cm to 110 cm, 120 cm and 130 cm were decreasing each 1.4%, 2.5%, 2.7%, 4.5%, 2.2 %, 5.8 % in supine, erect position. While standard deviations from 100 cm to 110 cm, 120 cm and 130 cm were increasing each 1.4 %, 2.5 %, 2.5 %, 4.0 %, 2.0 %, 4.9 % Consequently, there are no significant differences in abdomen images taken. Conclusion: As the results described above, we strongly recommend using long Sourceto Image receptor Distance than 100cm that we have been using. So, we should deliver less Entrance Surface Dose to the patients while maintaining image quality in abdomen radiography.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.97-108
• /
• 2006

C. H. OH, S. N. CHOI, T. G. NAM, The Kinematic Analysis of the Tennis Flat Serve Motion, Korean Jiurnal of Sports Biomechanics, Vol. 16, No. 2, pp. 97-108, 2006. By the comparison and the analysis of the different factors during the tennis flat serve motion such as the required time per section, the movement displacement of the racket, the velocity of the upper limbs joints, the physical center of gravity, and the angle and the angular velocity of the upper limbs joints between an ace player and a mediocre player, these following results were drawn. First, the experiment result of the total time required per section in a tennis flat serve motion showed that an ace player was faster than a mediocre player by 0.4 seconds. This result suggested that it was required to increase the speed of the racket head by a swift swing to perform an effective flat serve motion. Second, the experiment result of the movement displacement of the racket in the tennis flat serve motion showed that an ace player greatly moved toward the left side on an x-axis. But both an ace and a mediocre player were shown to be at the similar points on a y-axis at the moment of the impact of the racket. An ace player was also shown to be located at a higher position on a z-axis by 0.23m. Third, the velocity of the center of gravity of an ace player was faster in every phase than that of a mediocre player in a tennis flat serve motion. Fourth, the velocity of the upper limb joints of an ace player was faster in every phase than that of a mediocre player in a tennis flat serve motion. Fifth, the experiment result of the speed of the racket head in tennis flat serve motion showed that a mediocre player was faster than an ace player in the first phase, but the latter was faster than the former in the second, third, and the fourth phases. Sixth, at the moment of impact of a tennis flat serve, an ace player had greater flexion of the angle of the wrist joints by an 11.8 degree than a mediocre player. An ace player also had greater extension of the angle of the elbow joint and the shoulder joint respectively by a 5.2 degree and a 1.4 degree with a mediocre player. Seventh, an ace player had greater angular velocity of the upper limb joints and the hip joints than a mediocre player at the moment of the impact of tennis flat serve. Eighth, an ace player was shown to have a greater change of the forward and the backward inclination (or the anterior and posterior inclination) of the upper body

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1026-1032
• /
• 1996

The effects of steeping temperature $(7^{\circ},\;15^{\circ},\;20^{\circ}\;and\;30^{\circ}C)$ and steeping time $(2{\sim}14\;hr)$ on the physicochemical properties of milled rice (variety; Chucheongbyeo) were investigated. The pH of the steep water decreased as the steeping time increased, which was more pronounced at higher steeping temperature. The solid loss was about 4.0% during steeping. The contents of protein, fat and ash decreased during steeping, which was greater at elevated temperature. The lightness of rice was slightly increased, and the yellowness was decreased upon steeping. The water-binding capacity of rice was increased during steeping at above $15^{\circ}C$. The slight increase of the swelling power of rice at $80^{\circ}C$ was observed upon steeping. The maximum wavelengh for the rice flour-iodine complex was moved to a higher wavelengh, but X-ray diffraction patterns remained constant regardless the steeping conditions. The pasting properties of rice flour (10%) by amylograph indicated that the peak viscosity increased as the steeping time was increased at all steeping temperatures. The steeping resulted in the greater breakdown and the 1ower setback. The log peak viscosity showed a linear relationship with the steeping time. The activation energy and $Q_{10}$ value for the visciosity increase rate was 2, 320 cal/mole and 1.14, respectively.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.04b
• /
• pp.45-45
• /
• 2002

나노미터 크기의 결정립을 가지는 나노분말 및 나노복합분말의 제조와 특성에 관한 연구가 매우 활발하다. 나노복합분말의 제조방법에는 기상증발후 응축법, 화학응축법, 기계적합금법 등이 있으나, 고순도 및 균일한 크기분포의 분말과 응집되지 않은 분말의 제조 조건을 가장 잘 만족하는 방법은 화학기상응축법(Chemical Vapor Condensation; CVC)이다. 본 연구그룹 에서는 CVC밤법으로 이용하여 공구/금형재료에 가장 많이 사용되는 WC/Co 합금의 결정립을 n nm크기로 극미세화고자하는 연구을 진행하고 있다. 본 연구에서는 이들 WC/Co합금제조시 가장 중요한 출발분말인 나노크기 WC 분말의 제조와 그 특성에 관하여 연구하고자 하였다. 나노미터 WC분말을 제조하기 의한 전구체는 고상의 금속유기물인Tungstenhexacarbonyl$(W(CO)_6)$ 을 사용하였다. 수평관상로을 반응기로 사용하였으며, 노내의 온도을 500-110$0^{\circ}C$로 변화시 키면서 WC 분말을 합성하였다. 반응기 및 포집기 내부를 대기분위기, 상압의 Ar분위기, 진공 분위기로 변화시켜 압력 및 분위기의 영향을 조사하였다. 포집기는 상온 및 액체질소로 냉각 한 Chiller을 사용하였다. 형성분말의 상분석은 XRD로 조사하였으며, 형태 및 결정립크기는 TEM로 분석하였다. 반응온도 600 -1 OOO$^{\circ}C$의 온도범위에서 검은색의 WC 분말이 제조되었다. XRD 분석의 결과 로 제조된 분말은 상온에서 준안정상인 Hexagonal 구조의 $\gammar-WC_{1-x}$ 상이였으며, TEM 분석결 과 상압하에서는 약 30nm이하의 WC분말이 제조되었으며, 그 형태는 둥근 4각형의 모양을 지녔다. 감압하에서 진행한 경우 결정립의 크기는 8nm이하를 가졌다.곤가스로 산화를 방지하였고, 냉매로는 질소가스를 이용하였다. 제조된 분말을 기ㅖ적 분급법을 이용하여 분급하였고, 냉매로는 질소가스를 이용하였다. 제조된 분말을 기계적 분급ㅂ법을 이용하여 분급하였고, 압출에 이용된 분말은 250$\mu\textrm{m}$이하의 크기를 사용하였다. 또한 분말제조과정 중 형성되는 표면산화층을 제거하기 위하여 36$0^{\circ}C$에서 4시간동안 수소 환원처리를 행하였다. 제조된 분말은 열간 압출을 위하여 Aㅣcan에 넣고 냉간성형체를 만들고, 진공처리를 한 후 밀봉하여 탈가스처리를 하였다. 압출다이는 압출비가 각각 28:1과 16:1인 평다이(9$0^{\circ}C$)를 사용하여 각각 내경이 9, 12cm이고, 길이가 50, 30cm인 압출재를 제조하였다. 열간압출한 후의 미세조직을 광학현미경으로 압출방향에 평행한 방향과 수직방향으로 관찰하였고, 열간 압출재 이방성을 검토하기 위하여 X선 회절분석을 실실하여 결정방위를 확인하였다. 전기 비저항 및 Seebeck 계수 측정을 위하여 각각 2$\times$2$\times$10$mm^3$ 그리고 5$\times$5$\times$10TEX>$mm^3$ 크기의 시편을 준비하였다.준비하였다.전류를 구성하는 주요 입자의 에너지 영역(75~l13keV)에서 가장 높은(0.80) 상관계수를 기록했다. 넷째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가 있음을 시사한다.se that were all low in two aspects, named "the Nonsign