• Journal of Magnetics
• /
• v.12 no.4
• /
• pp.133-136
• /
• 2007

We have carried out the study of magnetocaloric effect for as-quenched and annealed $Fe_{91-x}Y_xZr_9$ alloys. Samples were prepared by arc melting the high-purity elemental constituents under argon gas atmosphere and by single roller melt spinning. These alloys were annealed one hour at 773 K in vacuum chamber. The magnetization behaviours of the samples were measured by vibrating sample magnetometer. The Curie temperature increases with increasing Y concentration (x=0 to 8). Temperature dependence of the entropy variation ${\Delta}S_M$ was found to appear in the vicinity of the Curie temperature. The results show that annealed $Fe_{86}Y_5Zr_9$ and $Fe_{83}Y_8Zr_9$ alloys a bigger magnetocaloric effect than that those in as-quenched alloys. The value is 1.23 J/kg K for annealed $Fe_{86}Y_5Zr_9$ alloy and 0.89 J/kg K for as-quenched alloy, respectively. In addition, the values of ${\Delta}S_M$ for $Fe_{83}Y_8Zr_9$ alloy is 0.72 J/Kg K for as-quenched and 1.09 J/Kg K for annealed alloy, respectively.

• Radiation Oncology Journal
• /
• v.6 no.1
• /
• pp.93-99
• /
• 1988

Some modern accerelators provide a dual energy for photon beam treatment. The main advantages of dual energy in the treatment of rectosigmoid or rectal cancer are as fellows. 1. Dose in the critical organ such as small intestine, bladder and genital organ are reduced. 2. Presacral and perineal area is fully covered. Dose distribution analysis such as calculation of dose in a target volume, isocenter, $D_{nax}$ and dose spectrum in any region of interest are possible. Examples of plan are given and results are discussed.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.09a
• /
• pp.175-177
• /
• 2005

본 연구에서는 fresnoite ($Ba_{2}TiSi_{2}O_{8}$) 결정화 유리를 $xK_{2}O-(33.3-x)BaO-16.7TiO_{2}-50SiO_{2}$ ($0{\le}x{\le}\;20mol\%$)으로 부터 제조하였으며, 특성평가를 하였다. $K_{2}O$의 치환량이 증가함에 따라, 유리전이 온도와 결정화 온도는 감소하였으며, 유리의 안정화를 나타내는 ${\Delta}$T는 증가하였다. $Ba_{2}TiSi_{2}O_{8}$ 결정상의 형성은 XRD와 SEM분석을 통하여 관찰하였고, LCR meter를 사용하여 열처리에 의하여 제조된 결정화 유리의 유전율은 측정하였으며, 결정화 유리는 $Ba_{2}Si_{2}TiO_{8}$ 단결정 보다 낮은 유전율은 보였다.

• Communications of the Korean Mathematical Society
• /
• v.8 no.3
• /
• pp.383-387
• /
• 1993

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1645-1652
• /
• 2002

The failure analysis on fractured parts is divided into the qualitative method by naked eyes and metallurgical microscope etc. and the quantitative method by SEM and X-ray diffraction etc. X-ray fractography can be applied to contaminated surface as well as clean surface and gain the plastic deformation and the residual stress near the fractured surface. Turbine blade is subject to cyclic bending force by steam pressure and suffers fatigue damage according to the increasing operating time. Therefore, to clean up the fracture mechanism of torsion-mounted blade in nuclear plant, the fatigue and the X-ray diffraction test was performed on the 12%Cr steel fur turbine blade and the fractured parts. The correlation of X-ray parameter and fracture mechanics parameter was determined, and then the load applied to actual broken turbine blade was predicted. Failure analysis was performed by contact stress analysis and Goodman diagram of torsion-mounted blade.

• Journal of the Korean Society of Safety
• /
• v.33 no.2
• /
• pp.28-31
• /
• 2018

In display and semi-conductor manufacturing process, there are numerous unstable factors such as particle concentration, minimal vibration, changes in magnetic field, or electrostatic that becomes an issue to be managed and controlled. In the recent, X-ray ionization is widely used that is neutralized by separating air or gas molecules in the area where the static must be resolved. The mono-type of X-ray ionizer was not capable to be used in $8^{th}$ generation panels manufacturing plant due to its insufficient ionizing coverage since the panel itself is approximately in $2m{\times}3m$. To resolve the current problem, the development of new type called, "Multi-type X-ray ionizer" has resulted in covering enough ionizing space in $8^{th}$ generation panels industry. Comparing mono and multi types with MCNPX code simulation, the multi one indicates more X-ray flux, efficiency, and ionization performance in comparison with either a mono-type or multi-type in array format. In addition, the ionizing efficiency of overlapping area with multi-type showed 30% higher effectiveness rate as to the ordinary mono-type.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.2
• /
• pp.96-99
• /
• 2014

We fabricated $(Li_{0.5-x}Na_xLa_{0.5})Ti_{0.8}Zr_{0.2}O_3$(LNTLZ)ceramics ($0{\leq}x{\leq}0.4$) with a perovskite structure via standard solid state synthesis. The influence of Na content on the structural and electrical properties of LNTLZ ceramics was also investigated. During XRD patterns analysis, all of the samples showed orthorhombic structure. The resistance of LNTLZ ceramics decreased as Na content increased, and the maximum activation energy shows 0.56 eV at x=0.4 at room temperature. These results indicated that LNTLZ ceramics are a candidate for use Lithium ion batteries as electrolytes.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2395-2406
• /
• 1992

Laminar natural convection heat transfer from a hot body in a square enclosure has been studied for various center positions of a hot body at Grashof number Gr=1.5$\times$10／sup 5／, Prandtl number Pr=0.71 and dimensionless thermal conductivity K／sub s／／K／sub f／= 14710. In case of vertical cold walls, the natural convection at the dimensionless center position of a hot body, X／sub c／Y／sub c／=0.2, 0.5 shows the most strong and at X／sub c／, Y／sub c／=0.5, 0.8 the most weak. In case of horizontal cold walls, the natural convection at the dimensionless center position of a hot body ; X／sub c／ Y／sub c／=0.5, 0.2 shows the most strong and at X／sub c／, Y／sub c／=0.2, 0.5 the most weak.

• Journal of Magnetics
• /
• v.20 no.3
• /
• pp.246-251
• /
• 2015

This study was aimed to study the effect of Zn content on the hyperfine parameters and the structural variation of $Ni_{1-x}Zn_xFe_2O_4$ for x = 0, 0.2, 0.4, 0.6, and 0.8. To achieve this, a sol-gel route was used for the preparation of samples and the obtained ferrites were investigated by X-ray diffraction, scanning electron microscopy, and $M{\ddot{o}}ssbauer$ spectroscopy. The formation of spinel phase without any impurity peak was identified by X-ray diffraction of all the samples. Moreover, the estimated crystallite size by X-ray line broadening indicates a decrease with increasing Zn content. This result was in agreement with the scanning electron microscopy result, indicating the reduction in grain growth with further zinc substitution. The room-temperature $M{\ddot{o}}ssbauer$ spectra show that the hyperfine fields at both the A and B sites decreased with increasing Zn content; however, the rate of reduction is not the same for different sites. Moreover, the best fit parameter showed that the quadrupole splitting values of B site increased from the pure nickel ferrite to the sample with x = 0.8.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.8
• /
• pp.718-729
• /
• 2015

A S / X dual broad band patch antenna with shared aperture structure is fabricated. A $2{\times}2$ perforated patch is used for S-band operation and a $2{\times}2$ patch antenna array is integrated in the $2{\times}2$ perforation for X-band operation. The measurement results of a S / X dual broad band patch antenna with shared aperture structure show the broad band characteristics larger than 20 % in both bands.