• YAKHAK HOEJI
• /
• v.41 no.5
• /
• pp.658-665
• /
• 1997

Identification of a soil microorganism strain X-8, producer of ${\beta}$-lactamase inhibitor, based on its morphological, physiological, biochemical and chemotaxonomical characteristics was performed. The strain X-8 was identified as Pseudomonas sp. The beta-lactamase inhibitor produced by this strain was highly achieved in fermentation medium contained glucose 0.5%, urea 0.25%, $K_2HPO_4{\cdot}3H_2O\;0.5%,\;MgSO_4{\cdot}7H_2O\;0.5%,\;FeSO_4{\cdot}7H_2O\;0.01%,\;CuSO_4,\;ZnSO_4,\;MnSO_4\;0.02%$. The beta-lactamase inhibitor was not extracted by organic solvent such as n-butanol and ethyl acetate but remained in aqueous layer. The n-butanol extract showed antimicrobial activity against M. smegmatis. The ${\beta}$-lactamase inhibitor was stable at pH 7.0~8.0 and 4$^{\circ}C$ for 24h. The ${\beta}$-lactamase inhibitor was bound on ion exchanger Diaion WA-30 and HP-20 and eluted with 2N-$NH_4OH$ and acetone, respectively.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.353-355
• /
• 1988

The properites of Zn-diffusion in III-V ternary alloy semiconductor $In_{1-x}Ga_{x}p$, which was grown by the temperature gradient solution (TGS) method, have been investigated. The composition, x, dependence of the Zn-diffusion coefficient at $850^{\circ}C$ and the activation energy for Zn-diffusion into $In_{1-x}Ga_{x}p$ were found to be $D850^{\circ}C$(x)= $3.935{\times}10^{-8}exp(-6.84{\cdot}x)$, and $E_{A}(x)=1,28+2,38{\cdot}x$, respectively. From this study, we confirm that the Zn-diffusion in $In_{1-x}Ga_{x}p$ was explainable with the diffusion mechanisms of the interstitial-substitutional, which was widely accepted mechanisms in the III-V binary semiconductors.

• The Korean Journal of Zoology
• /
• v.18 no.2
• /
• pp.71-86
• /
• 1975

The G-banding patterns of normal and of delayed spiralized chromosomes by BUdR were investigated in three established cell lines of dwarf hamsters. The results obtained were as follows: 1. The number of G-bands appeared in Chinese hamster T-233 cell line was 65. The centromeric dark band was found in No.1 chromosome and weakly stained bands were also observed in part of the centromeric regions of Nos. 2, 3, 8 and $X_2$ chromosomes. Two homologous X chromosomes were found in different banding patterns. Terminal dark bands were shown in No. 1 chromosome. No conspicuous bands appeared in No. 10 chromosome. 2. Eighty four bands appeared in Armenian hamster Y-1249 cell line. Centromeric dark bands were observed in Nos. 5 and 10 chromosomes and moderatly stained bands were also found in near the centromeric region of the long arms of Nos. 7 and 9 chromosomes. Two isomorphic X chromosomes were also distinguished by their banding patterns. 3. In Y-1313 Armenian hamster cell line, the bands were 69. No centromeric dark bands were observed in this cell line, but moderatly stained bands appeared in the centromeric area in the long arm of No. 9 chromosome. The banding patterns of these two cell lines of Armenian hamster were quite different and readily distinguished. Only No. 8 chromosome showed similar G-banding patterns. Although Nos. 5, 7 abd 8 chromosomes revealed the same number of bands in these two cell lines, the location and staining intensity were quite different. 4. Chromosomes of Nos. 1, 2, 6, $X_1$ and $X_2$ in T-233 cell line and of 1, 4, 7, 8, 9, $X_1$ and $X_2$ in both cell lines of Armenian hamster were found to be elongated due to the inhibition of mitotic spiralization by BUdR. G-banding patterns of these chromosomes were found to be identical to those of normal chromosomes in these cell lines.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.1
• /
• pp.33-38
• /
• 1995

The mechanical properties and structure of degummed silk fiber stretched after being treated with 8M LiBr aqueous solution were investigated. The mechanical properties of degummed silk fiber were depended upon the treatment temperature of 8M LiBr aqueous solution. That is, the strength and elongation had a tendancy to increase with the temperature, whereas the Young's modulus tended to decrease. The X-ray diffraction pattern showed that the crystalline orientation was disordered by 8$0^{\circ}C$ treatment neverthless destruction of the crystallites did not occur. rho silk fiber could be successfully stretched up 160% under the condition of 8M LiBr aqueous solution at 80 * after immersed for 1hr. For the highly stretched sample(160%), the tensile strength and Young's modulus were significantly improved in spite of lower elongation at break. According to the examination of X-ray diffraction pattern and SEM, the orientation tends to be occured more and more with stretching ratio. From the DSC thermograms, it shows that the thermal decomposition behavior was different between untreated and treated specimen with 8M LiBr aqueous solution. The maximun endothermic peak of thermal decomposition tends to increase to high temperature with the increase of stretching ratio.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.6
• /
• pp.274-277
• /
• 2007

In this study, liquid crystal(LC) aligning capabilities for homeotropic alignment on the $SiO_x$ thin film by electron beam evaporation method were investigated. Also, the control of pretilt angles and thermal stabilities of the nematic liquid crystal(NLC) treated on $SiO_x$ thin film were investigated. A high pretilt angle of about $86.5^{\circ}$ was obtained, and also the suitable pretilt angle of the NLC on the $SiO_x$ thin film at $10{\sim}50nm$ thickness with e-beam evaporation can be achieved. The uniform LC alignment and good thermal stabilities on the $SiO_x$ thin film surfaces with electron beam evaporation can be achieved. It is considered that the LC alignment on the $SiO_x$ thin film by electron beam evaporation is attributed to elastic interaction between LC molecules and micro-grooves at the $SiO_x$ thin film surface created by evaporation.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.4
• /
• pp.320-326
• /
• 1999

In rapidly solidified $Al_{92-x}Nd_8$(Cu,Ag)x ($0{\leq}X{\leq}10at%$) alloys, amorphous single phases were obtained in the ranges of $Oat%{\leq}X{\leq}4at%$ for Al-Nd-Cu system and $Oat%{\leq}X{\leq}6at%$ for Al-Nd-Ag system, respectively. Mesoscopic structures consisted of amorphous and crystalline phases were formed above solute ranges. It was founded that the mesoscopic structures were also formed near 1st exothermic peak on DSC curve by aging in amorphous single phase alloys. For example, amorphous $Al_{92-x}Nd_8$(Cu,Ag)x (X=2.4at%) alloys containing nanoscale Al particles and compounds, i.e., mesoscopic structure, exhibited higher tensile fracture strength(${\sigma}_f$) than those of amorphous single phase alloys with the same composition. The ${\sigma}_f$ showed a maximum value in the $V_f$ ranges of 10~15%. The reason is presumed that the nanoscale precipitates which have higher mechanical strength compared with the amorphous phase with the same composition act as an effective resistance to shear deformation of the amorphous matrix.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.9-17
• /
• 1996

Solid oxide electrolytes of 8mol% YSZ($Y_2O_3$ stabilized zirconia) were prepared at various sintering conditions and their ionic conductivities were measured. The highest ionic conductivity of $10^{-1}S.cm^{-1}$ was obtained when the sintering temperature was 1400oC and the sintering time was 10hr. Also the cathode material, $La_{1-x}Sr_xMnO_3$ was prepared by solid state reaction method and the overpotential, electrical conductivity, and charge transfer resistance between cathode material and YSZ electrolyte were studied. It was found that the optimum doping content of Sr for La was 50mo1%.

• The Research Journal of the Costume Culture
• /
• v.13 no.4 s.57
• /
• pp.526-539
• /
• 2005

Recently in the apparel industry, early adolescent girls are emerging as a new consumer group. In response to this, companies are developing clothes, cosmetics, underwear, etc. This study proposed a new size range and size interval for early adolescent girls and presented reference measurements for body parts necessary in designing clothes. For this purpose, a total of 529 girls aged between 10 and 14 were measured and data were collected from 42 anthropometric measurements and 41 photographic measurements per a person. SAS 8.1 was used in data analysis including means, standard deviations, frequency analysis. Based on the results, this study proposed: for Type A - 7 sizes (140A-67, 145A-65, 145A-69, 150A-69, 150A-73, 155A-73, 155A-76): for Type X - 7 sizes (150x-72, 155x-72, 155x-77, 160x-77, 160x-80, 165x-77, 165x-80); and for Type H - 8 sizes (145H-74, 145H-82, 150H-78, 150H-82, 155H-82, 155H-86, 160H-86, 160H-88). Reference measurements suggested for upper garments were 9 items. The outcome of this study may be used as a basic material for adolescent apparel manufacturers to set their apparel sizing system and to supply their consumers, namely, adolescent girls with products fitting their somatotype.

• Journal of Magnetics
• /
• v.10 no.4
• /
• pp.142-144
• /
• 2005

The Magnetization behaviour has been measured for amorphous $Fe_{80-x}Mn_xZr_{10}$ (x = 4,6,8,10) alloys. The Curie temperature decreased from 236 K to 195 K with increasing Mn concentration (x = 4 to x = 10). The magnetization measurements were conducted at temperatures above the Curie temperature in the paramagnetic region. In all samples, the magnetic properties showed superparamagnetic behavior above $T_c$ where the mean magnetic moment of the superparamagnetic spin clusters decreased with increasing temperature. A large magnetic entropy change, ${\Delta}S_M$, which is calculated from H vs M curves associated with the ferromagnetic-paramagnetic transitions in amorphous, has been observed. With Mn concentration increasing, ${\Delta}S_M$ decreases 1.04, 0.95, 0.87 J/kg K at 222, 210, 195 K (the Curie temperature), respectively.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.224-230
• /
• 1999

$SrBi_{2x}Ta_2O_9$ (SBT) thin films were prepared on platinized silicon substrates by MOD process, and their ferroelectric and leakage current characteristics were investigated. The grain size of the MOD derived SBT films increased with increasing the BI/Ta mole ration. Although the SBT films with x of 0.8~1.2 were composed of the equiaxed grains, the elongated grains were also observed for the SBT films with x of 1.4 and 1.6. The SBT film with x of 1.2 exhibited the optimum ferroelectric properties of 2PR : 9.79 $\muC/\textrm{cm}^2$ and Ec : 24.2kV/cm at applied voltage of 5V. The leakage current density of the SBT films increased with increasing the BI/Ta mole ratio. With post annealing process, 2Pr and $E_c$of the SBT film with x of 1.2 increases 11.3 $\muC/\textrm{cm}^2$ and 39.6kV/cm, respectively. decrement of the leakage current density by post annealing process increased remarkably with increasing the Bi/ta mole ratio, and the SBT film with x=1.6 exhibited the lowest leakage current density after post annealing process.