• Journal of the Korean Society of Radiology
• /
• v.5 no.6
• /
• pp.343-349
• /
• 2011

This study was aimed to evaluate the absorbed dose in brain of dental radiography. For radiographic exposure, PLD(photoluminescence dosimetry) chips placed in Rando phantom to measurement the absorbed dose to pituitary gland, orbit, maxillary sinus and submandibular glands, thyroid gland, esophagus. Equipments were used Kodak 2200, Kodak 8000C dental radiographic systems and computed tomography(Lightspeed VCT). The absorbed doses were measured at the same exposure parameters and distance by the clinical factor(kV, mA, sec). The result were as follows ; The absorbed dose for intra-oral radiography were 0.02~2.47cGy, the greatest absorbed dose was 2.47cGy for thyroid gland in maxillary right molar projection. the lowest adsorbed dose was 0.02cGy for submandibular glands in lower anterior projection. The absorbed dose for extra-oral radiography were 0.36~3.44cGy of cephalometric method, 0.14~12.82cGy of panoramic method, 8.17~253.63cGy of computed tomography, the greatest adsorbed dose was 253.63cGy for submandibular glands in maxillary CT scan. the lowest adsorbed dose was 0.14cGy for orbit in panoramic method. As a result, extra-oral radiography was measured more than intra-oral radiography. In particular, method which used computed tomography was measured more than 100 times than intra-oral radiography highly. Therefore, you must show a guideline in extra-oral radiography and an effort to reduce absorbed dose is demanded.

• Journal of the Korean Ceramic Society
• /
• v.31 no.5
• /
• pp.513-519
• /
• 1994

Alumina composite was fabricated by introducing tetragonal ZrO2 in alumina composite of $\alpha$-alumina reinforced with in-situ formed La-$\beta$-aluminate (LaAl11O18). The powder mixture of composition (100-x)[88 Al2O3+(La2O3+11 Al2O3)]+x vol% ZrO2 was prepared with x from 0 to 40. Dense composites fabricated by hot-pressing exhibited bending strength up to 1200 MPa. The gain growth inhibiting effect of ZrO2 grains and La-$\beta$-aluminate platelets, and possibly the stress-induced phase transformation of ZrO2 have resulted in the high bending strength. The fracture toughness of the composite also increased up to 8.5 MPa.m1/2. The enhancement in toughness can be explained by transformation and microcrack toughening of ZrO2 and by crack deflection and bridging of La-$\beta$-aluminate platelets and ZrO2.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1785-1796
• /
• 2015

In this paper, we investigate achieving the full diversity order and power gains in case of using OSTBCs and quasi-OSBCs in the x channel system with interference alignment with more than 2 antennas at each terminal. A slight degradation is remarked in the case of quasi-OSTBCs. In terms of receiver structure, we show that due to the favorable structure of the channel matrices, the simple zero-forcing receiver achieves the full diversity order, while the interference cancellation receiver leads to degradations in performance. As compared to the conventional scheme, simulation results demonstrate that our proposed schemes achieve 14dB and 16.5dB of gain at a target bit error rate (BER) of 10^-4 in the case of OSTBCs with 3 and 4 antennas at each terminal, respectively, while achieving the same spectral efficiency. Also, a gain of 10dB is achieved at the same target BER in the case of quasi-OSTBC with 4 antennas at each terminal.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2009.12a
• /
• pp.298-298
• /
• 2009

유기농업 토양에서 합리적인 유기물 관리를 위한 기초자료로 활용하기 위하여 밭토양에서 동일한 유기물을 9년간 연용하면서 옥수수의 건물량의 연차간 변화량을 조사하였다. 처리는 무비구(WF)를 비롯하여 화학비료 단용처리(CF), 화학비료 및 돈분왕겨퇴비 혼용(CF+CPR) 두었으며, 유기자원별로는 돈분왕겨퇴비(CPR), 채종유박(RC), 볏짚퇴비(CRS), 녹비(GM) 등 7처리를 두었고, 작물의 생산성은 줄기와 알곡을 포함한 총 건물량에 대하여 화학비료 단용구를 대조로 하여 상대비교하였다. 옥수수의 생육은 파종후 52일 및 수확기에 볏짚퇴비구와 녹비처리구에서 가장 양호하였다. 9년차 옥수수 총 건물량은 화학비료구 1,226kg/10a 대비 녹비처리구에서 121%로 높았으나 볏짚퇴비구 97%, 채종유박 92% 돈분왕겨퇴비 80%로 낮았으며, 무비구의 경우 24%의 수량을 보였다. 양분의 흡수량은 녹비처리구에서 11.8kg/10a로 화학비료구에 비하여 낮았으나 다른 유기자원 처리구보다 높았다. 질소 이용율은 녹비처리구 61.1%로 화학비료구 61.6%와 동일한 수준을 보였다. 화학비료구에 대한 상대적인 수량은 녹비처리구에서 5년차까지 증가하다가 6년차부터 점차 감소하는 경향(y=$-2.044x^2$+25.302x+51.402, $R^2$=0.8571)이었으며, 볏짚퇴비구도 7년차까지는 수량이 증가하다가 8년차부터 감소하는 경향(y=$-1.0621x^2$+13.091x+63.59, $R^2$=0.6643)을 보였다. 유기질비료구와 돈분왕겨퇴비구는 완만한 감소경향을 보였으나 무비구는 급격히 감소하는 경향이지만 점차 감소폭이 좁아지는 경향(y=$0.4584x^2$-9.5544x+69.221, $R^2$=0.8777)을 보였다.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2007

Filter colorimeters have a set of spectral bands for which spectral responsivity is the same as the color matching function defined by CIE (Commission Internationale de I'Eclairage). We have designed a set of color matching function filters denoted by $\bar{x}-filter,\;\bar{y}-filter,\;and\;\bar{z}-filter$. Because the $\bar{x}-function$ has two transmission bands, two $\bar{x}-filters$ are designed to cover the $\bar{x}-function$. To design the filters, we developed a nonlinear least square fit program which determines the thickness of the color glasses by minimizing its spectral mismatch value ($f{_1}'$) to below 3 %. The design has been validated by fabrication of the $\bar{y}-bar$ filter, of which $f{_1}'$ was measured to be 2.8 %. Considering a LCD flat panel display as a device under test, we have calculated the systematic error of the colorimetric measurement using the designed filters.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.405-412
• /
• 2001

Corrosion tests were carried out in $360^{\circ}C$ water and $360^{\circ}C$ 70ppm LiOH solution to investigate the corrosion behavior of new zirconium alloys (Zr-0.4Nb-0.8Sn-xFeCrMn, Zr-0.2Nb-1.1Sn-xFeCrMn, Zr-1.0Nb-xFeCu). Microstructures of tested alloys were analyzed by optical microscope and TEM. The cross-sectional surface and crystalline structure of the oxide layer were analyzed by SEM and XRD. From the results of corrosion test, all the alloys showed higher corrosion rates in $360^{\circ}C$ 70ppm LiOH aqueous solution thats in $360^{\circ}C$ water. Especially, high Nb-containing alloy exhibited the acceleration of corrosion rate in LiOH solution. The low Nb- and Sn-added alloys showed better corrosion resistance than the Sn- free high Nb alloy. from the effect of final annealing on the corrosion, it was observed that the partially recrystallized alloys showed better corrosion resistance than fully recrystallized alloys. This would be related to the size and distribution of the second phase particles.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.4 no.3_4
• /
• pp.92-98
• /
• 1971

With Saxidomus Purpuratus which were sampled near Yungdo, in the harbor of Pusan during the period from September 1967 to October 1968, the author investigated the maturity against seasonal change of water temperature; and shell length, height and width against live weight, respectively, and the reciprocal correlations of shell length, height and width, as well. The maturity, concerned deeply with tile developing procedure of gonad, is dependent on the change in water temperature. The value of maturity becomes higher from March to May, but in August with high temperature the value decreases temporarily. During the main spawning season from the late August to the middle of October, the value shows the peak throughout a year. After the period, it has decreased until January when the water temperature is below $10^{\circ}C$ The equations of shell length against live weight for male($W=0.4749L^{2.62307}$)and for female ($W=0.3438L^{2.77993}$) shell height against live weight ($W=0.3221L^{3.06661}$), and shell width against live weight ($W=3.5868L^{2.46646}$), show non-straight lines respectively. On the other hand, th: equations of shell length against shell height Y=0.818x+0.292 (r=0.958), shell length against shell width Y=0.520x+0.200 (r=0.799) and shell height against shell width Y=0.499x+0.516 (r=0.773) show straight lines, respectively.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.717-722
• /
• 2004

Response surface methodology was used to optimize production conditions of monoacylglycerol (MAG) and diacylglycerols (DAG) from corn oil by enzymic glycerolysis. Contents of $1,3-DAG\;(Y_1),\;1,2-DAG\;(Y_2),\;total\;DAG\;(Y_3),\;MAG\;(Y_4)$, and total $DAG+MAG\;(Y_5)$ were obtained. Conditions were optimized using central composite design with incubation temperature $(35-75^{\circ}C,\;X_1)$, incubation time (1-11 hr, $X_2$), and amount of hexane added (0-2 mL, $X_3$) as three variables. Content of 1,3-DAG was maximized by 20.43 area% at incubation temperature of $44.92^{\circ}C$, incubation time of 10.24 hr, and hexane content of 1.16 mL, whereas that of 1,2-DAG (26.78 area%) was maximized at $56.32^{\circ}C$, 6.95 hr, and 1.04 mL, respectively. Predicted maximum total DAG content was 45.09 area% at $53.82^{\circ}C$, 8.03 hr, and 1.08 mL, while production conditions of MAG (9.57 arae%) were $64.14^{\circ}C$, 7.00 hr, and 0.13 mL. At variables of $54.07^{\circ}C$, 7.98 hr, and 1.02 mL, maximum content of total DAG+MAG predicted by RSM was 53.54 area%.

• Food Science and Preservation
• /
• v.20 no.4
• /
• pp.532-538
• /
• 2013

This study was done in order to monitor the quality properties of the granule using Bokbunja (Rubus coreanus Miquel) extracts. In order to prepare the granule depending on operational parameters such as content of Bokbunja extract ($X_1$, 0.4~1.2 g), sugar content ($X_2$, 6~10 g) and citric acid content ($X_3$, 0.1~0.3 g), a response surface methodology was applied to monitor the optimum recipes on the organoleptic properties and Hunter's color. The optimum recipe on the organoleptic color showed extract content of 0.96 g, sugar content of 7.05 g and citric acid content of 0.232 g. The optimum recipe on the organoleptic flavor showed extract content of 0.86 g, sugar content of 6.04 g and citric acid content of 0.215 g. The optimum recipe on the organoleptic taste showed extract content of 0.92 g, sugar content of 6.39 g and citric acid content of 0.251 g. The optimum recipe on the overall palatability showed extract content of 0.86 g, sugar content of 6.65 g and citric acid content of 0.272 g. The response surface of the Hunter's color b value was similar to the response of the overall palatability; therefore, the optimum conditions accepted by the consumers were 0.8 g Bokbunja extract content and 0.6 g sugar content in the Hunter's color a value of 6.0.

• Journal of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.233-238
• /
• 1985

The non-porous and porous polystyrene divinylbenzene copolymers were prepared by the suspension polymerization method. The non-porous aminated polystyrene divinylbenzene, N-APSTDVB and the porous aminated polystyrene divinylbenzene, P-APSTDVB of 50∼100mesh size weakly basic anion exchanger were synthesized by chloromethylation followed by amination with methylamine. The functional groups of these synthesized anion exchangers were confirmed by their infrared spectra. The maximum capacity of these exchangers was 4.86meq/g. Pore volume and pore spectra were determined with a mercury porosimeter. The pore volume of P-PSTDVB increased with increasing X$_{diluent}$ at 30% of divinylbenzene. However, the pore volume of P-PSTDVB increased with increasing volume percent of divinylbenzene at constant mole fraction of diluent, X$_{diluent}$ of 0.5. The pore volume of synthesized copolymer and anion exchanger at 8% divinylbenzene and 0.5X$_{heptane}$ decreased as follows; P-PSTDVB 〉P-APSTDVB 〉N-PSTDVB. This result was attributed to the possibility that the pore volume were reduced by amination reactions. The distribution coefficients of boric acid on the N-APSTDVB anion exchanger in various concentrations of alcohol water solutions showed that as alcohol concentration increased, the distribution coefficients values decreased due to the reduced concentration of H$_2$BO$_3^-$.