• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.123-129
• /
• 2013

Purpose: The way check the movement of the fiducial marker insertion in the treatment of patients with prostate cancer. However the existing methods of fiducial marker verification process difficult to identify the specific location of the marker behind the femur and pelvic bone. So to study the evaluation of maker match with using kilo voltage (KV) X-ray by On-board imager to both oblique verification method. Materials and Methods: Five patients were selected for rectal ballooning and inserted fiducial marker. Compare the position of the fiducial marker of reference plan 2D/2D Anterior/Posterior verification method and 2D/2D both oblique verification method. So to measurement the shift score of X, Y, Z (axis) and measure exposure dose given to patients and compare matching time. Results: 2 dimensional OBI KV X-ray imaging using two-dimensional matching image are orthogonal, so locating fiducial marker matching clear and useful DRR (digital reconstruction radiography) OBI souce angle ($45^{\circ}/315^{\circ}$) matching most useful. 2D/2D both oblique verification method was able to see clearly marker behind the pelvic bone. Also matching time can be reduced accordingly. According to the method of each matching results for each patient in each treatment fraction, X, Y, and Z axis the Mean $value{\pm}SD$ (standard deviation) is X axis (AP/LAT: $0.4{\pm}1.67$, OBLIQUE: $0.4{\pm}1.82$) mm, Y axis (AP/LAT: $0.7{\pm}1.73$, OBLIQUE: $0.2{\pm}1.77$) mm, Z axis (AP/LAT: $0.8{\pm}1.94$, OBLIQUE:$1.5{\pm}2.8$) mm. In addition, the KV X-ray source dose radiation exposure given to the patient taking average when AP/LAT matching is (0.1/2.1) cGY, when $315^{\circ}/45^{\circ}$ matching is (0.27/0.26) cGY. Conclusion: In conclusion for inserted fiducial marker of prostate cancer patients 2D/2D both oblique matching method is more accurate verification than 2D/2D AP/LAT matching method. Also the matching time less than the 2D/2D AP/LAT matching method. Taken as the amount of radiation exposure to patients less than was possible. Suggest would improve the treatment quality of care patients more useful to establish a protocol such as case.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.172-176
• /
• 2010

Purpose: The patients' moves occurred at PET/CT scan will cause the decline of correctness in results by resulting in inconsistency of Attenuation Correction (AC) and effecting on quantitative evaluation. This study has evaluated the utility of reconstruction method using AC position changing method when having inconsistency of AC depending on the position change of emission scan after transmission scan in obtaining PET/CT 3D image. Materials and Methods: We created 1 mL syringe injection space up to ${\pm}2$, 6, 10 cm toward x and y axis based on central point of polystyrene ($20{\times}20110$ cm) into GE Discovery STE16 equipment. After projection of syringe with $^{18}F$-FDG 5 kBq/mL, made an emission by changing the position and obtained the image by using AC depending on the position change. Reconstruction method is an iteration reconstruction method and is applied two times of iteration and 20 of subset, and for every emission data, decay correction depending on time pass is applied. Also, after setting ROI to the position of syringe, compared %Difference (%D) at each position to radioactivity concentrations (kBq/mL) and central point. Results: Radioactivity concentrations of central point of emission scan is 2.30 kBq/mL and is indicated as 1.95, 1.82 and 1.75 kBq/mL, relatively for +x axis, as 2.07, 1.75 and 1.65 kBq/mL for -x axis, as 2.07, 1.87 and 1.90 kBq/mL for +y axis and as 2.17, 1.85 and 1.67 kBq/mL for -y axis. Also, %D is yield as 15, 20, 23% for +x axis, as 9, 23, 28% for -x axis, as 12, 21, 20% for +y axis and as 8, 22, 29% for -y axis. When using AC position changing method, it is indicated as 2.00, 1.95 and 1.80 kBq/mL, relatively for +x axis, as 2.25, 2.15 and 1.90 kBq/mL for -x axis, as 2.07, 1.90 and 1.90 kBq/mL for +y axis, and as 2.10, 2.02, and 1.72 kBq/mL for -y axis. Also, %D is yield as 13, 15, 21% for +x axis, as 2, 6, 17% for -x axis, as 9, 17, 17% for +y axis, and as 8, 12, 25% for -y axis. Conclusion: When in inconsistency of AC, radioactivity concentrations for using AC position changing method increased average of 0.14, 0.03 kBq/mL at x, y axis and %D was improved 6.1, 4.2%. Also, it is indicated that the more far from the central point and the further position from the central point under the features that spatial resolution is lowered, the higher in lowering of radioactivity concentrations. However, since in actual clinic, attenuation degree increases more, it is considered that when in inconsistency, such tolerance will be increased. Therefore, at the lesion of the part where AC is not inconsistent, the tolerance of radioactivity concentrations will be reduced by applying AC position changing method.

• Journal of Aquaculture
• /
• v.9 no.1
• /
• pp.25-42
• /
• 1996

The study has been conducted to know an appropriate feeding strategy and effects of the rearing density on larval growth of the rockfish, Sebastes schlegeli. The results obtained are as fellowed ; 1. Thirty-day-old larvae reached at $25.25{\pm}3.76$ mm in total length and $0.23{\pm}0.07$ g in body weight in experiment A, at which rotifer was provided from the beginning to the end of 30-day experiment, Anemia from 3th to 18th day, and artificial feed from 13th to 30th day after hatching. When rotifer was provided for 30 days, Artemia from 6th to 18th day, and artificial feed from 18th to 30th day after hatching (experiment B), these larvae grew up to $27.52{\pm}2.50$ mm in total length and $0.26{\pm}0.06$ g in body weight. On the other hand, when rotifer and artificial feed were supplied with the same time schedule as shown in experiment B, and Artemia was feed from 6th to 30th day after hatching (experiment C), the total length and body weight of those larvae were $23.22{\pm}3.44$ mm and $0.15{\pm}0.05$ g, respectively. The best result for larval growth was obtained from experiment B. The survival rates estimated were $57.6\%$ in experiment A, $66.4\%$ in experiment B, and $44.4\%$ in experiment C. 2. The growth in total length of the larvae according to their rearing days could be represented by the following equations : Experiment A : Y=4.350+0.116X+$1.887X^2$ (r=0.993) Experiment B : Y=4.500+8.931X+$2.221X^2$ (r=0.994) Experiment C : Y=4.478+5.734X+$1.881X^2$(r=0.990) The average number of Artemia nauplius intaken by the larvae was rapidly increased between 15th and 20th day afer hatching, and 9, 212, 242, 750, and 1,171 nauplius were found in the different sizes of larvae, whose total length were 5.65, 6.81, 9.45, 14.96, and 24.52 mm, respectively. 3. Larval growth in total length and body weight reared at four different densites (A: 1.8 $kg/m^3$, B; 4.0 $kg/m^3$, C; 5.0 $kg/m^3$, D; 6.2 $kg/m^3$) indicated that the best growth was found in experiment A, at which the larval were reared at the lower density and the final survival rates extimated were $92.9\%$ in exp. A, $99.5\%$ in exp. C, $89.0\%$ in exp. B, and $88.2\%$ in exp. D. The amount of production per cubic meter turned out to be 30.45 kg in exp. D, 25.89 kg in exp. C, 20.75 kg in exp. B and 10.48 kg in exp. A. therefore, considering both larval growth and survival rate, higher yields seemed to be attainable at the relatively high-rearing density.

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.3
• /
• pp.126-133
• /
• 2015

The aim of this study is to investigate the effect of solution treatment on the corrosion behavior of Mg-8%Al-(0-1)%Zn casting alloys in 1M NaCl aqueous solution. After the solution treatment, all alloys showed single ${\alpha}$-(Mg) phase microstructure by dissolution of ${\beta}(Mg_{17}Al_{12})$ phase into the ${\alpha}$-(Mg) matrix. The $H_2$ evolution volume decreased with an increase in Zn content, which indicates that the addition of Zn plays a beneficial role in decreasing corrosion rate of the Mg-Al-Zn alloy in solution-treated state. The microstructural evaluations on the corrosion products and corroded surfaces after the immersion test in 1 M NaCl solution revealed that the incorporation of more $Al_2O_3$ and ZnO into the corrosion product, by which the penetration of $Cl^-$ ions is impeded, are thought to be responsible for the better corrosion resistance in relation with the Zn addition.

• Journal of Environmental Science International
• /
• v.18 no.5
• /
• pp.551-559
• /
• 2009

This study aims to find out negative factors against public safety in urban parks. Longitudinal data between 1994 and 2008 were analyzed to suggest management implication for high quality security and safety in urban park. Results are summarized as follows. Firstly, investigation of visitor to the park at night reveals that visitors who were elderly, walking out, and family group increased, and that most visitors took a stroll for one hour around 8:00pm. Olympic park (e.g. leisure facility 66.7%), Hyo-won park (e.g. vacant lot 23.8%), Jang-an park (e.g. near hedge 30.1%), and Mae-tan park (e.g. leisure facility 20.8%) were revealed as latent places of serious criminals. Secondly, both in 1994 and in 2008, principal factors of public safety were summarized as fear for violence(X1) and fear for closed space(X3). These factors took 3.22 followed by 3.07 respectively in the overall mean of public safety of parks. Thirdly, overall mean of public safety takes 2.22 in 1994 and 2.96 in 2008, which shows uncertainty of effective management of facilities with a viewpoint of visitors. All parks shows negative trend in public safety, in short.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.24 no.1
• /
• pp.7-16
• /
• 2012

To meet the local requirement i.e. the tropical stress of Andhra Pradesh and marginal farmers, twenty four new hybrid combinations were tested in Line x Tester method involving eight newly developed polyvoltine oval lines viz., MSO1, MSO2, MSO3, MSO4, MSO5, MSO6, MSO7 and MSO8 and three bivoltine silkworm breeds viz., APS12, APS45 and APS8 as testers. These hybrids were reared to evaluate their performance. Data for eight economically important metric traits viz., fecundity, cocoon yield per 10,000 larvae by number, cocoon yield per 10,000 larvae by weight, survival rate, cocoon weight, cocoon shell weight, cocoon shell ratio and filament length was recorded. General combining ability (gca), specific combining ability (sca) and heterosis were analyzed. Further, the relative merit of the hybrids for all the traits under study was also assessed adopting Evaluation Index method. Based on combining ability effects, heterosis and evaluation index, five hybrid combinations viz., MSO3 $\times$ APS45, MSO1 $\times$ APS12, MSO7 $\times$ APS8, MSO2 $\times$ APS45 and MSO1 $\times$ APS45 were selected for further evaluation in different seasons.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.13-17
• /
• 2006

The elasto-plastic finite element method (FEM) was used to investigate the effect of off-center recessing location (8 mm length) on the stress distribution in the lap zone of adhesively bonded aluminium double lap joint. The results from simulation showed that the effect of off-cent recessing in bondline of double lap joint in the mid-bondline is not evidently to stress distribution in mid-bondline but the peak stresses both in mid-bondline and in the interface near the adherend side of the joint may increase markedly when an 8 mm length recessing was arranged symmetrical to the point of x =18 mm. When shifting an 8 mm length recess from near left end to the right end of the lap zone, all the highest peak stresses in the mid-bondline occurred under the condition of recess arranged symmetrical to the point of x = 6 mm.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.813-818
• /
• 2016

Distribution of clay minerals separated from clay fraction of corn fields in Korea has been investigated along with their characterization. Crystalline phases of the clay minerals were identified by powder X-ray diffraction (XRD) pattern, and their relative chemical compositions were analyzed by X-ray fluorescence spectrometry (XRF). The soils were found to have pH 6.4, organic matter $37.2g\;kg^{-1}$, available $P_2O_5$ $599mg\;kg^{-1}$, respectively, and exchangeable K, Ca and Mg were 1.2, 7.3 and $1.8cmol_c\;kg^{-1}$, respectively. Major primary minerals consisted mainly of quartz and mica, and kaolinite and chlorite were identified as major secondary clay minerals. For most of soils, mica phase was identified to be muscovite rather than biotite. The average contents of $SiO_2$, $Al_2O_3$ and $Fe_2O_3$ were 43.7, 23.6 and 8.8%, respectively, although they were different with the locations.

• Journal of Environmental Health Sciences
• /
• v.29 no.4
• /
• pp.21-26
• /
• 2003

We examine the metabolites(DCB and acetyl DCB) extracted from exfoliated urothelial cells of 33 workers who employed DCB-handling industries. The characteristics of workers submitted urine, whose age, working years and smoking persons were 41.9$\pm$11.1, 8.7$\pm$5.5 and 25(32.0%), respectively. DNA adduct was isolated from the exfoliated urothelial cells by applying $^{32}$ p-postlabeling procedure. Metabolites(DCB and acetyl DCB) were extracted from DNA adducts by hydrolyzing and N-glycosylase. Concentrations of DCB and acetyl DCB were 28.6$\pm$5.25 ng/g DNA, and 17.0$\pm$3.73 ng/g DNA, respectively. The regression between DCB level and exposure years of workers is y = 1.668 + 2.588x(p = 0.005, $r^2$= 0.394). The regression between acetyl DCB level and exposure years of workers is y = 8.071 + 1.325x(p = 0.076, $r^2$= 0.222). Smoking workers are significantly higher than non-smoking workers on DCB and acetyl DCB level(p = 0.065 and 0.021, respectively). DCB level was 33.9$\pm$7.14 ng/g DNA on smokers, and 23.1$\pm$9.97 ng/g DNA on non-smokers. Acetyl DCB was 25.1$\pm$5.27 ng/g DNA on smokers, and 8.92$\pm$7.22 ng/g DNA on non-smokers.

• Journal of Broadcast Engineering
• /
• v.20 no.5
• /
• pp.774-777
• /
• 2015

This paper introduces the world's first programmable video-processing platform for the enhancement of the video quality of the 8K(7680x4320) UHD(Ultra High Definition) TV operating up to 60 frames per second. In order to support required computing capacity and memory bandwidth, the proposed platform implemented several key features such as symmetric multi-cluster architecture for parallel data processing, a ring-data path between the clusters for data pipelining and hardware accelerators for computing filter operations. The proposed platform based on RP(Reconfigurable Processor) processes video quality enhancement algorithms and handles effectively new UHD broadcasting standards and display panels.