• Title/Summary/Keyword: X8

Search Result 8,976, Processing Time 0.033 seconds

GPS-X Based Modeling on the Process of Gang-byeon Sewage Treatment Plant and Design of Recycle Water Treatment Process (GPS-X 기반 모델링에 의한 강변사업소 처리효율 분석 및 반류수 처리 공정 설계)

  • Shin, Choon Hwan
    • Journal of Environmental Science International
    • /
    • v.25 no.11
    • /
    • pp.1493-1498
    • /
    • 2016
  • The efficiencies of Gang-Byeon sewage treatment facilities, which are based on GPS-X modelling, were analysed and used to design recycle water treatment processes. The effluent of an aeration tank contained total kjeldahl nitrogen (TKN) of 1.8 mg/L with both C-1 and C-2 conditions, confirming that most ammonia nitrogen ($NH_3{^+}-N$) was converted to nitrate nitrogen ($NO_3{^-}-N$). The concentrations of $NH_3{^+}-N$ and $NO_3{^-}-N$ were found to be 222.5 and 227.2 mg/L, respectively, with C-1 conditions and 212.2 and 80.4 mg/L with C-2 conditions. Although C-2 conditions with higher organic matter yielded a slightly higher nitrogen removal efficiency, sufficient denitrification was not observed to meet the discharge standards. For the total nitrogen (T-N) removal efficiency, the final effluent concentrations of T-N were 293.8 mg/L with biochemical oxygen demand (BOD) of 2,500 mg/L, being about 1.5 times lower than that (445.3 mg/L) with BOD of 2,000 mg/L. Therefore, an external carbon source to increase the C/N ratio was required to get sufficient denitrification. During the winter period with temperature less than $10^{\circ}C$, the denitrification efficiency was dropped rapidly even with a high TKN concentration (1,500 mg/L). This indicates that unit reactors (anoxic/aerobic tanks) for winter need to be installed to increase the hydraulic retention time. Thus, to enhance nitrification and denitrification efficiencies, flexible operations with seasons are recommended for nitrification/anoxic/denitrification tanks.

The Evaluation of the Thick Polycrystalline HgO and PbO Films Derived by Particle Sedimentation Method for the Mammographic Application (입자침전법을 이용한 다결정 산화수은과 산화납 필름의 방사선 유방촬영 장치 적용성 평가)

  • Noh, Si-Cheol;Park, Ji-Koon;Choi, Il-Hong;Jung, Hyoung-Jin;Kang, Sang-Sik;Jung, Bong-Jae
    • Journal of the Korean Society of Radiology
    • /
    • v.8 no.7
    • /
    • pp.429-433
    • /
    • 2014
  • In this study, the morphology and the x-ray quantum efficient of mercury oxide (HgO) and lead oxide (PbO) sensors derived by particle sedimentation method were discussed. In the pursuit of this purpose, we investigated the electrical characteristics and the x-ray quantum efficiency of various thicknesses of HgO and PbO films in mammographic x-ray energy. We have therefore developed a particle-in-binder sedimentation method of fabricating large area polycrystalline films onto transparent glass substrates coated with indium tin oxide. We are currently optimizing the growth method to improve the quantum efficiency with the ultimate goal of obtaining as quantum efficiency close to that of single crystal performance. Our future efforts will concentrate on optimization of large area film growth techniques specifically for deposition on a-Si:H flat panel readout arrays.

The Pilates Effects about Scoliosis (척추 측만증에 대한 필라테스 효과)

  • Seo, JunHwan;Hong, SeongGyun
    • Journal of the Korean Society of Radiology
    • /
    • v.8 no.7
    • /
    • pp.397-400
    • /
    • 2014
  • This study purpose is to know about the effect of Cobb's angle of scoliosis patient by Pilates ecercise. It was executed for prove this exercise with Pilates Postural Correct Exercise(PCE), Spine Stretching Exercis(SSE), Muscle Strengthing Exercise(MSE). PCE is useful for unbalanced muscle energy and SSE gives relax for hypertensioned muscles and MSE is correcting balance for prime mover and secondary mover and so it will be recovery for elasticity and flexibility of paraspine muscles. The method study was proved with a Cobb's angle measurement of Lumbar spine by X-ray test before and after. As a result for the test, Cobb's angle by X-ray it shows reduced about 5 degree in statistics(p=0.005). And so It shows the Pilates exercise gives reduce for Scoliosis.

Synthesis, Properties, and X-ray Crystal Structure of Copper(II) Complex with Bis[(2-pyridyl)methyl]-2-(2-pyridyl)ethylamine (Bis[(2-pyridyl)methyl]-2-(2-pyridyl)ethylamine 구리(II) 착물의 합성, 성질 및 X-ray 결정구조)

  • Choi, Ki-Young
    • Journal of the Korean Chemical Society
    • /
    • v.51 no.1
    • /
    • pp.31-35
    • /
    • 2007
  • The tripodal copper(II) complex [Cu(pmea)(H2O)](ClO4)2·H2O (1) (pmea = bis[(2-pyridyl)methyl]-2-(2-pyridyl)ethylamine) has been synthesized and structurally characterized by X-ray diffraction method. It crystallizes in the triclinic system P-1 with a = 9.9362(9), b = 15.7299(17), c = 18.0562(11) A, α = 68.760(8), β = 76.331(6), γ = 77.092(9)°, V = 2526.2(4) A3, Z = 2. Each copper atom reveals a distorted square pyramidal with three nitrogen atoms of the pmea ligand and water molecule occupying the basal plane and one nitrogen atom from the pyridine ring according the axial position. The cyclic voltammogram of 1 undergoes reversible one-electron oxidation to the CuIII and reversible one-electron reduction to the CuI.

A Study on Design and Application of Tissue Compensator for 6MV X-rays (6MV X-선에 대한 조직 보상체의 제작 및 응용에 관한 연구)

  • Chai Kyu Young;Choi Eun Kyung;Chung Woong Ki;kang Wee Saing;Ha Sung Whan;Park Charn Il
    • Radiation Oncology Journal
    • /
    • v.7 no.1
    • /
    • pp.123-132
    • /
    • 1989
  • A radiation beam incident on an irregular or sloping surface produces the non-uniformity of absorded dose. The use of a tissue compensator can partially correct this dose inhomogeneity. The tissue compensator is designed based on the patient's three dimensional contour. After required compensator thickness was determined according to tissue deficit at $25cm\pm25cm$ field size, 10cm depth for 6MV x-rays, tissue deficit was mapped by isoheight technique using laser beam system. Compensator was constructed along the designed model using 0.8mm lead sheet or 5mm acryl plate. Dosimetric verification were peformed by film dosimetry using humanoid phantom. Dosimetric measurements were normalized to central axis full phantom readings for both compensated and non-compensated field. Without compensation, the percent differences in absorbed dose ranged as high as $12.1\%$ along transverse axis, $10.8\%$ along vertical axis. With the tissue compensators in place, the difference was reduced to $0\~43\%$ Therefore, it can be concluded that the compensator system constructed by isoheihnt technique can produce good dose distribution with acceptible inhomogeneity, and such compensator system can be effectively applied to clinical radiotherapy.

  • PDF

Prediction Model for Health Promotion Behaviors of the Workers in an Area (일 지역 근로자의 건강증진행위 예측모형)

  • Lee, Mee-Ja
    • Research in Community and Public Health Nursing
    • /
    • v.15 no.1
    • /
    • pp.102-109
    • /
    • 2004
  • Purpose: The purpose of this study was to confirm a structural model for health promotion for industrial workers. Methods: Data was collected by questionnaires from 294 industrial workers at a food manufacturing factory. The data collected were analyzed through SAS 8.1 and Window LISREL 8.12a. Results: 1. The result of the test showed that the measurement of fitness was $x^2$=(삭제) 443.35, $x^2$/df 5.3415, GFI .86, AGFI .75, RMR .060, NFI .95, NNFI .93, CN 77.58, and those other than NFI and NNFI did not well fit into the practical data. 2. 15 out of 29 paths in a constructed model were statistically significant. 3. The measurements for total fitness in the modified model were $x^2$= (삭제) 146.51, $x^2$/df 1.8546, GFI .95, AGFI .91, RMR .042, NFI .98, NNFI .99, CN 223.44, all of which showed fitness in good shape to the practical data. 4. The result of the study for the modified model indicated that perceived self efficacy had the most significant direct effect on health promotion behaviors, and self esteem, perceived benefits of action, interpersonal influences, commitment to a plan of action were important factors having influences on them. Conclusion: The derived model in this study is considered appropriate in explaining and predicting health promoting behavior of industrial workers. Therefore, it can effectively be used as a reference model for further studies and suggested implication in nursing practice.

  • PDF

Effect of Crystal Structural Environment of Pr3+ on Photoluminescence Characteristics of Double Tungstates

  • Lee, Kyoung-Ho;Chae, Ki-Woong;Cheon, Chae-Il;Kim, Jeong-Seog
    • Journal of the Korean Ceramic Society
    • /
    • v.48 no.2
    • /
    • pp.183-188
    • /
    • 2011
  • In this article, the effect of the crystal structural environment of $Pr^{3+}$ ions on the photoluminescence (PL) characteristics of double tungstates, such as $A(M_{1-X}Pr_X)W_2O_8$ (A=Li, Cs, M = In, Y, Sc, La; $0.007{\leq}x{\leq}0.1$) and $La_{1.96}Pr_{0.04}W_3O_{12}$ are characterized. By varying the ion radius in A and M sites, the structural environment of $Pr^{3+}$ ions were modified. The structural criteria, that is, the point charge electrostatic potentials V around the $Pr^{3+}$ activator, were calculated using the crystal structural parameters. The point charge potential V can be a valid criterion for $^3P_o$ quenching in various double tungstates. When the calculated V values are large (> 6.0), the luminescence from the $^3P_0$ level becomes dominant. When the calculated V values are about 3.8, the $^1D_2$ line appears weakly but $^3P_0$-level luminescence is absent. When the calculated V values are small (< 2.0), the luminescence from the $^1D_2$ level becomes dominant and $^3P_0$-level luminescence is absent. At 2.0$^3P_o$ quenching to $^1D_2$ level occurs substantially in accordance with the structural criterion of the point charge potential model.

"Statistics is difficult"? - Textbooks problems ("통계학은 어렵다"? - 통계학교재의 문제점)

  • Lee, Wonwoo
    • Journal of the Korean Data and Information Science Society
    • /
    • v.24 no.6
    • /
    • pp.1253-1262
    • /
    • 2013
  • This study observes not only how much those who studied Statistics during the college years feel that Statistics is difficult but also why they felt it was difficult. Most of the targeted researchers, 80.8 percent, say "Statistics was difficult". They selected the item "textbooks were hard to understand" as the main reason (62.5%). Based on the explanatory survey of text books, many textbooks do not distinguish the small letter, x from the capital letter, X. Hence, in this study, one of the main reasons why most of the researchers felt Statistics was difficult must be the ambiguousness of the notations. If authors keep in mind the importance of the difference between capital letters and small letters in Statistics, the Statistics learners' recognition of difficulty of Statistics will decline.

Breast Cancer Association with CYP1A2 Activity and Gene Polymorphisms - a Preliminary Case-control Study in Tunisia

  • Ayari, I;Arnaud, MJ;Mani, A;Pavanello, S;Saguem, S
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.16 no.8
    • /
    • pp.3559-3563
    • /
    • 2015
  • The aim of the present study was to evaluate the relative contribution of CYP1A2 isoforms (-3860 G/A, -2467T/delT and -163C/A) in control subjects and breast cancer patients to the metabolism of caffeine in human liver. Restriction fragment length polymorphism analysis of PCR-amplified Fragments (PCR-RFLP) was used for the genotyping of CYP1A2 SNPs and HPLC allowed the phenotyping through the measurement of CYP1A2 activity using the 17X + 13X + 37X/137X urinary metabolite ratio (CMR) and plasma caffeine half life (T1/2). The CYP1A2 -3860A genotype was associated with a decreased risk of breast cancer. In contrast, distributions of the CYP1A2 -2467T/delT or -2467delT/delT and -163A/C or A/A genotypes among breast cancer patients and controls were similar. When the genotype and phenotype relationship was measured by comparing the mean CMR ratios and caffeine half life within the genotype groups between subjects and breast cancer patients, there were no significant differences except for -3860 A, most of them being homozygous for the -3860 G/G SNP and had a significant higher mean CMR ratio and half life than those with -3860 G/A (P=0.02). The results of this preliminary study show a significant association between CP1A2 -3860 G variant and CYP1A2 phenotype which must be confirmed by further large-size case-control studies.

A Study on Fabrication and Sintering Behavior of Al-Pb-X(Sn,Sn-Si) clad strips (급냉응고한 Al-Pb-X(Sn,Sn-Si)계 합금분말(合金粉末)의 압연판재(壓延板材)의 제조(製造)와 소결(燒結)특성)

  • Choi, Jong-Gu;Moon, Jong-Tai;Lee, Yong-Ho;Cho, Sung-Suk
    • Journal of Korea Foundry Society
    • /
    • v.12 no.3
    • /
    • pp.210-219
    • /
    • 1992
  • The measurement of the apparent and tap density for Al-Pb-X(Sn,Sn-Si) powders produced by centrifugal atomizer showed that the larger theoretically calculated densities the larger those densities. And tap densities were not over 50% of the theoretical densities. The nip angle of Al-5wt%Pb alloy powders produced with 38000 r.p.m. of disk rotation was $3^{\circ}$ degree larger than that of Al-8.5wt%Pb-3wt%Sn(-4wt%Si, 8wt%Si) with 50000 r.p.m. The effects of roll gap and rolling speed on thickness and density of the single strips by rolling were that rolling speed increasing the thickness and density of strip decreased and roll gap increasing, the thickness of strip increased but the density decresed. The compactibility of Al-Pb-X with Al by rerolling showed that the coarse powder-strips were better than fine powder-strips. From the SEM study with EDX analysis on the sintered strips, it was found that Pb and Sn were segregated with maximum size $5{\mu}m$, and Si existed surrounding the segregation zone. After sintering the clad strips at $500^{\circ}C$, the pores, which were spherical with $5{\mu}m$ of mean diameter, partly remained around the particles of alloy powders area, while completely disappeared at clad interface. The hardness of strips of alloy powders decreased linearly with increasing sintering temperature.

  • PDF