• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3843-3849
• /
• 2013

This study was conducted to determine the effects of fetal bovine serum (FBS), bovine serum albumin (BSA) and epidermal growth factor (EGF) on blastocoel formation, total cell number, apoptosis and apoptosis-related gene expression of porcine diploid parthenotes developing in vitro. The addition of 0.4% BSA to the culture medium enhanced the development of 2-cell stage parthenotes to the blastocysts stage (p<0.01). Treatment of FBS reduced cell numbers of blastocysts (p<0.01) and increased the percentage of apoptosis in blastocysts (p<0.001). However, BSA increased cell numbers, only in the presence of EGF reverse-transcriptase polymerase chain reaction revealed that EGF enhanced the mRNA expression of Bcl-xL in the presence of 0.4% BSA but BSA and EGF alone had no effect. However, Treatment of FBS reduced Bcl-xL mRNA expression (p<0.05) and enhanced Bak expression. This result suggests that apoptosis related gene expression is significantly affected by supplements, which may result in alteration of apoptosis and embryo viability of porcine embryos developing in vitro.

• Microbiology and Biotechnology Letters
• /
• v.15 no.5
• /
• pp.334-339
• /
• 1987

Enzymatic conversion of pyruvic acid produced by microorganism to tryptophan was investigated. A luminescent bacteria. Beneckea sp., was used for the production of pyruvic acid. As a source of tryptophanase which synthesizes tryptophan from pyruvic acid, indole and ammonia, whole cells of Enterobacter aerogenes ATCC 10031 were used directly in the reaction mixture. To increase the production of tryptophan, nonionic detergents and nonaqeous organic solvents were used ms reserviors of indole in the reaction mixture. In the case of nonionic detergents, TritonX-100 was very effective. When 1.5% of Triton X-100 was used, 7.7g/$\ell$ of tryptophan was produced at 37$^{\circ}C$ for 48hr. In the case of nonaqueous solvents, 8.7g/$\ell$ of tryptophan was produced at 37$^{\circ}C$ for 48 hr, when 10% of benzene was used. This amount of tryptophan corresponds to conversion of 48% of Indole and 36% of pyruvic acid, respectively.

• Microbiology and Biotechnology Letters
• /
• v.22 no.4
• /
• pp.389-394
• /
• 1994

8 X 10$^{6}$(viable cells/ml) of maximum cell density and 9000(IU/ml) of $\gamma$-IFN production were obtained at 55(ml/hr) of a perfusion rate by cultivating HSF cells using a moving membrane aeration bioreactor. This system proves to be an efficient culture process by maintaning 90% of viable cells during the whole cultivation periods. The metabolic molar quotient of glucose to lactate was 0.81 for overall ranges of glucose consumed while the evolution of ammonia was not linearly related to the consumption of glutamine. Low molar conversion ratio was observed in low consumptions of glutamine and high molar conversion ratio in high comsumptions. It also shows that the glutamolysis plays important role in the steady state conditions by evolving larger quantities of ammonia than lactate. At the above of 50 rpm, which is the optimum agitation speed for this bioreactor, the cell growth was severely affected while the IFN production was less decrea- sed, maintaing 1.5 X 10$^{-3}$(IU/cell/day) specific IFN production rate. The cumulatvie $\gamma$-IFN production was 7.2 X 10$^{8}$(IU) for 70 days of the cultivation, which yields 1 X 10$^{7}$ (IU/day) of IFN production rate. Therefore, a commercial production of $\gamma$-IFN by this culture process can be achievable by maintaining the above IFN productivity in a scaled-up culture system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11A
• /
• pp.1271-1277
• /
• 2004

We propose a foe phase tuner and a rounding processor for a numerically controlled oscillator (NCO), yielding a reduced phase error in generating a digital sine waveform. By using the fine Phase tuner Presented in this paper, when the ratio of the desired sine wave frequency to the clock frequency is expressed as a fraction, an accurate adjustment in representing the fractional value can be achieved with simple hardware. In addition, the proposed rounding processor reduces the effects of phase truncation on the output spectrum. Logic simulation results of the NCO for multi-carrier channel separation in cdma2000 3X multi-carrier receive system using these techniques show that the noise spectrum and mean square error (MSE) are reduced by 8.68 dB and 5.5 dB, respectively compared to those of truncation method and 2.38 dB and 0.83 dB, respectively, compared to those of Paul's scheme.

• Korean Journal of Adult Nursing
• /
• v.24 no.4
• /
• pp.348-357
• /
• 2012

Purpose: This retrospective chart review study was carried out in order to examine the frequency of delirium, and to identify the risk factors associated with the development of delirium in elderly patients with arthroplasty. Methods: Data were collected from medical records of patients who received arthroplasty during one and half year in a hospital. Three hundred sixty five patients were selected for the study. The onset of delirium was reviewed based on the result of psychological doctor's consultation or nurse's assessment with Confusion Assessment Method and delirium onset risk factors were examined. Data were analyzed with descriptive statistics, t-test, $x_2$-test, Fisher's exact test and logistic regression analysis. Results: Delirium occurred with 31 patients (8.5%) out of 365 patients who underwent arthroplasty. There were statistically significant differences between incidence of delirium and gender ($x_2$=6.11, p=.025), age ($x_2$=32.81, p<.001), hearing difficulty ($x_2$=8.08, p=.012), albumin level of preoperational day (t=-3.43, p<.001), albumin (t=-2.20, p=.028) and hemoglobin level (t=-2.83, p=.005) of operational day. Age and gender were the most significant predictive factors with regard to the incidence of delirium. Conclusion: Through understanding of these results, nurses will be able to identify those patients who may be at risk for developing delirium in early stages.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2637-2642
• /
• 2011

A new ultrasonic-assisted micellar extraction and cloud-point pre-concentration method was developed for the determination of major saikosaponins, namely saikosaponins -A, -C and -D, in Radix Bupleuri by high performance liquid chromatography with evaporative light scattering detection (HPLC-ELSD). The non-ionic surfactant Genapol X-080 (oligoethylene glycol monoalkyl ether) was chosen as the extraction additive and parameters affecting the extraction efficiency were optimized. The highest yield was obtained with 10% (w/v) Genapol X-080, a liquid/solid ratio of 200:1 (mL/g) and ultrasonic-assisted extraction for 40 min. In addition, the optimum cloud-point pre-concentration was reached with 10% sodium sulfate and equilibration at $60^{\circ}C$ for 30 min. Separation was achieved on an Ascentis Express C18 column (100 ${\times}$ 4.6 mm i.d., 2.7 ${\mu}M$) using a binary mobile phase composed of 0.1% acetic acid and acetonitrile. Saikosaponins were detected by ELSD, which was operated at a $50^{\circ}C$ drift tube temperature and 3.0 bar nebulizer gas ($N_2$) pressure. The water-based solvent modified with Genapol X-080 showed better extraction efficiency compared to that of the conventional solvent methanol. Recovery of saikosaponins ranged from 93.1 to 101.9%. An environmentally-friendly extraction method was successfully applied to extract and enrich major saikosaponins in Radix Bupleuri.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2170-2174
• /
• 2010

The surfaces of $TiO_2$ and ZnO nanoparticles have been modified by gold (Au) nanoparticles by a reduction method in solution. Their interfacial electronic structures and optical absorptions have been studied by depth-profiling X-ray photoelectron spectroscopy (XPS) and UV-vis absorption spectroscopy, respectively. Upon Au-modification, UV-vis absorption spectra reveal a broad surface plasmon peak at around 500 nm. For the as-prepared Au-modified $TiO_2$ and ZnO, the Au $4f_{7/2}$ XPS peaks exhibit at 83.7 and 83.9 eV, respectively. These are due to a charge transfer effect from the metal oxide support to the Au. For $TiO_2$, the larger binding energy shift from that (84.0 eV) of bulk Au could indicate that Au-modification site of $TiO_2$ is different from that of ZnO. On the basis of the XPS data with sputtering depth, we conclude that cationic (1+ and 3+) Au species, plausibly $Au(OH)_x$ (x = 1-3), commonly form mainly at the Au-$TiO_2$ and Au-ZnO interfaces. With $Ar^+$ ion sputtering, the oxidation state of Ti dramatically changes from 4+ to 3+ and 2+ while that (2+) of Zn shows no discernible change based on the binding energy position and the full-width at half maximum (FWHM).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.708-712
• /
• 2002

The crystallization of amorphous $\alpha$-Fe$_2$O$_3$/$\alpha$-AI$_2$O$_3$(0001) thin films during thermal annealing in air has been studied using real-time synchrotron x-ray scattering. The well aligned (0.02$^{\circ}$/ FWHM) $\alpha$-Fe$_2$O$_3$and Fe$_3$O$_4$interfacial crystallites (50- -thick) coexist on the $\alpha$-AI$_2$O$_3$(0001) in the sputter-grown amorphous films at room temperature. The amorphous precursor is crystallized to the epitaxial $\alpha$-Fe$_2$O$_3$grains in three steps with annealing temperature; i ) the growth of the well aligned $\alpha$-Fe$_2$O$_3$interfacial crystallites, together with the transformation of the Fe$_3$O$_4$crystallites to the $\alpha$-Fe$_2$O$_3$ crystallites, ii ) the growth of the less aligned (3.08$^{\circ}$ FWHM)$\alpha$-Fe$_2$O$_3$grains on the well aligned grains (＞40$0^{\circ}C$), and iii) the nucleation of the other less aligned (1.39$^{\circ}$ FWHM) $\alpha$-Fe$_2$O$_3$grains directly on the $\alpha$-AI$_2$O$_3$substrate (＞$600^{\circ}C$). The effective thickness thinner than 230 may be very useful for enhancing the epitaxial quality of $\alpha$-Fe$_2$O$_3$/AI$_2$O$_3$(0001) thin films.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.875-881
• /
• 2004

Fundamental results obtained from an atomic force microscope (AFM) chemically-induced direct nano-lithography process are presented, which is regarded as a simple method for fabrication nm-scale devices such as superconducting flux flow transistors (SFFTs) and single electron tunneling transistors (SETs). Si cantilevers with Pt coating and with 30 nm thick TiO coating were used as conducting AFM tips in this study. We observed the surfaces of superconducting strip lines modified by AFM anodization' process. First, superconducting strip lines with scan size 2 ${\mu}{\textrm}{m}$${\times}$2 ${\mu}{\textrm}{m}$ have been anodized by AFM technology. The surface roughness was increased with the number of AFM scanning, The roughness variation was higher in case of the AFM tip with a positive voltage than with a negative voltage in respect of the strip surface. Second, we have patterned nm-scale oxide lines on ${YBa}-2{Cu}_3{O}_{7-x}$ superconducting microstrip surfaces by AFM conductive cantilever with a negative bias voltage. The ${YBa}-2{Cu}_3{O}_{7-x}$ oxide lines could be patterned by anodization technique. This research showed that the critical characteristics of superconducting thin films were be controlled by AFM anodization process technique. The AFM technique was expected to be used as a promising anodization technique for fabrication of an SFFT with nano-channel.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.216-221
• /
• 2010

Employing statistical design of experiments, the difference in doping behaviors of rare-earth ions and their effects on the dielectric property and microstructure of $BaTiO_3$-MgO-$MnO_2$-($Ba_{0.4}Ca_{0.6}$) $SiO_3-Re_2O_3$ (Re = $Y_2O_3$, $Er_2O_3$) system were investigated. Through the statistical analysis we have found that the amount of $Re_2O_3$ are significantly affecting on the dielectric properties. The $Re_2O_3$ improved the dielectric constant, dielectric loss and R*C constant, so the appropriate contents of $Y_2O_3$ and $Er_2O_3$ were 0.8 ~ 1.2 mol% and 0.8 ~ 1.3 mol%, respectively. The MLCC(mutilayer chip capacitor) with $2.0{\times}1.2{\times}1.2mm$ size and 475 nF was also suited for X7R with the above composition. It showed that the dielectric constant and RC constant were 2,839 and 3,675 ${\Omega}F$, respectively in the sintering condition at $1250^{\circ}C$ in $Po_2$ $10^{-7}$ Mpa.