• 프린팅코리아
• /
• v.8 no.2
• /
• pp.96-99
• /
• 2009

Painter X의 한글 버전이 최근 출시됐다. Painter는 수채화, 유화 등 예술적인 이미지를 구현해 주는 프로그램으로, 포토샵보다 예술적이고 동화적인 이미지를 구현할 수 있어 디자인 및 사진 시장에서 새로운 조류로 각광받고 있다. 이번 호에서는 가장 손쉽고 빠른 방법으로 유화, 수채화 등을 제작할 수 있는 Auto Painting 기능에 대해 소개한다.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.2
• /
• pp.180-186
• /
• 2000

• Journal of the Korean Magnetics Society
• /
• v.13 no.6
• /
• pp.231-236
• /
• 2003

The $Al_{0.2}$CoF $e_{1.8}$ $O_4$ferrite powders have been prepared by the sol-gel method. The crystallographic and magnetic properties of the sample depending on annealing temperature have been investigated by means of x-ray diffraction, FE SEM, Mossbauer spetroscopy and vibrating sample magnetometry. The x-ray diffractions of all samples annealing temperature above 873 K clearly indicate the presence of spinel structure, the lattice constant decrease from 8.425 $\AA$ at 873 K to 8.321 $\AA$ at 1073 K, whereas the particle size rapidly increase from about 39 nm at 673 K to about 108 nm at 1073 K. The Mossbauer spectra annealed above 873 K could be fitted as the superposition of two sextets due to F $e^{3+}$ at A-site and B-site. The isomer shift (IS) and quadruple splitting (QS) values nearly constant with annealing temperature, whereas magnetic hyperfine field ( $H_{hf}$) of A-site slowly in crease and that of B-site fastly increases with increasing annealing temperature. The magnetic behaviour of powders shows that the saturation magnetization increase from 0.7 emu/g at 473 K to 72.1 emu/g at 1073 K while the coercivity decrease from 0.951 kOe at 673 K to 0.374 kOe at 1073 K with increasing annealing temperature.

• Composites Research
• /
• v.28 no.1
• /
• pp.6-14
• /
• 2015

Polymerization shrinkage stress analysis of dimethacrylate-based composite (Clearfil AP-X, Kuraray) and silorane-based composite (Filtek P90, 3M ESPE) used for dental composite restorations was performed using strain-gage measurement and FEM analysis. A theoretical equation based on Young's modulus and polymerization shrinkage of the composite resin was proposed to predict the polymerization shrinkage stress. Experimental results showed that the maximum shrinkage stress of Clearfil AP-X was about 2.8 times higher than Filtek P90. FEM analysis agreed with such experimental stress behaviours and showed that the maximum Von-Mises stress appeared near the margin of the filled resin adhered with PMMA ring. The stress concentration at the interface on the specimen surface was higher than that in the interior. The maximum error of shrinkage stress by the theoretical equation was reasonable within 5% in comparison to FEM results under plane stress.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.41-46
• /
• 2008

Etching kinetics of $EAGLE^{2000TM}$ LCD glass was investigated using 2.5MHF-xMHCl$(x:0\sim8)$ acid mixtures. It was concluded that the reaction of HF-containing solutions with the glass was the rate-determining step for the dissolution process when considering following observations; the value of the activation energy $35\sim45$ kJ/mol and insensitivity of the dissolution rate to the etching time and the moving velocity of the glass into the solution. The etching rate linearly increased with increasing the HCl concentration in the etchant. It was also observed that the etched surface was as smooth as the original surface by addition of HCl and increase in etching temperature. This is due to the catalytic role of the $H_{3}O^{+]$ ions in the dissolution process.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.61-69
• /
• 1989

Mackerel purse seine fishery operating in the sea area of Cheju and Tsushima is one of the most important fishery in Korean off shore fishery, which a fishing fleet are generally composed with one purse seiner, two light ships and three or four fish carriers. In this study, purse seiners are classified in to four classes in term of their gross tonnage : A class(80-100tons), B class(100-120tons), C class(130-140tons), and D class(140-150tons). Operating sea area are divided into five sectors including east and west sea area of Tsushima Island, coastal sea area of Cheju Island and south and west sea area of Cheju Island. The performance of the purse seiner, the fishing efficiency, the dimension of fishing gear and variation of CPUE in each operating sea area are summarized as follows: 1. The relationship between a gross tonnage x and net area of purse seine y of a purse seiner can be expressed as : y=538.8x+99657.3 2. The index of seasonal variation of CPUE from May to October is lower than the standard value, whereas index from November to April is higher. 3. The power factor of fishing efficiency by classes of boat-size shows significant differences with 1% level in each operating sea area. 4. The net efficiency of purse seiner by classes of boat-sea shows that B and C classes are higher than A and D classes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.1
• /
• pp.87-92
• /
• 2005

This study was investigated to examine gelatinization properties of waxy black rice starches. X-ray diffraction patterns in raw starches showed traditional A type of cereals. The crystalline regions of both black rice and Shinsunchalbyeo starches disappeared when temperature increased to $65^{\circ}C$ where the crystalline regions of two starches changed to amorphous ones. Scanning Electron Microscope showed that granule type of Shinsunchalbyeo starch was more collapsed compared to that of black rice starch heated at 6$0^{\circ}C$. Gelatinization in both samples completed when samples were heated at 63$^{\circ}C$. The results by Differential Scanning Calorimetry (DSC) revealed that gelatinization patterns were similar in both samples. In Rapid Visco Analyzer examination, there was no difference in peak viscosity, breakdown, final viscosity and setback between Shinsunchalbyeo and waxy black rice starches.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.608-616
• /
• 2009

This paper presents a broadband CPS-fed Yagi-Uda antenna. The antenna has a feedline structure much simpler than other Yagi-Uda antennas and it provides more design flexibility in arranging the reflector. To improve the impedance matching, a tapered CPS line is inserted between the thick and thin feedlines. The proposed antenna exhibits the bandwidth of $3.9{\sim}5.9$ GHz (|G| < -10 dB) and the gain of $6.5{\sim}8$ dBi within that bandwidth. At the center frequency of 4.9 GHz, the antenna shows the gain of 7.4 dBi, and HPBW of $98^{\circ}$ along the x-z plane and $73^{\circ}$ along the x-y plane.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.701-707
• /
• 2014

The ecofriendly yellow ocher is used in the manufacturing of cosmetics, construction, and food packaging. The polyethylene terephthalate (PET) used for manufacturing food containers has a microporous structure that causes aeration. Hydrophilic yellow ocher may be applied to hydrophobic PET by surface modification to overcome this issue. The aim of this study is to fabricate a yellow ocher polystyrene hybrid structure in the form of nanoparticles using an optimizing molar ratio of styrene, divinylbenzene, and potassium peroxodisulfate for use in emulsion polymerization. The polymerization was conducted in a yellow ocher suspension that was prepared by dispersing mechanically ground yellow ocher in DI water. The prepared hybrid structure was measured using scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. The measurement revealed the spherical morphology and Si component that resulted from the yellow ocher in the polystyrene particles. We expect that this hybrid structure would be used as platform material to minimize aeration in PET.

• Economic and Environmental Geology
• /
• v.37 no.4
• /
• pp.375-381
• /
• 2004

Pyrochlore was known as one of the most promising materials for the immobilization of radioactive actinide. This study includes the synthesis, phase relation and characteristics of pyrochlores (CaCeH$f_xTi_{2-x}O_7$=0.2, 0.6, 1.0, 1.4, 1.8, 2.0) in the system of Ca-Ce-Hf-Ti-O. The samples were prepared from high purity of starting materials under the pressure of 400kg/cm$^2$ at room temperature, and were sintered at 1200∼1$600^{\circ}C$ The synthesized samples were analyzed and identified with XRD. The optimal formation conditions of pyrochlores were at 1300∼150$0^{\circ}C$ under $O_2$ atmosphere with batch compositions. During synthesis, pyrochlore, perovskite and $A_{2}BO_{5}$ oxide were formed. The characteristics of this system is that parameter of pyrochlore was increased with the content of hafnium. This phenomenon was due to the difference of ionic size between hafnium and titanium in six coordinated site.