• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.69-73
• /
• 1991

The effects of disk surface velocity on the microstructures and magnetic properties of ${(Nd_{0.8}Dy_{0.2})}_{12}Fe_{80}B_8$ melt-spun ribbons were investigated. From the X-ray diffraction results. it is confirmed that the lower the surface velocity ($V_{s}$), the better the orientation of c-axis normal to the ribbon plane. The results of magnetic property measurements for the powder solidfied in magnetic field showed that the highest remanence was obtained from the alloy quenched at medium velocity of $V_{s}=14.6m/s$. The remanence of the powder solidfied in magenetic field was about 10 % higher than that of the powder solidfied in non-magnetic field.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.302-308
• /
• 1998

The author examined the response of Yoroi-mebaru, Sebastes hubbsi [MATSUBARA] to the underwater attracting lamps (0.5 W, 0.8 W, 1 W) line in the experimental water tank (550 L x 58 W x 73 H cm). The attracting rate investigated in accordance with the intervals of lighting and putting out hour (1, 5 minutes) when each of the underwater attracting lamps was gradually switched off after they were switched on all at once. The results are a follows: 1. Distribution rates of fish in the illuminated area was 35.7 % in case of 1 minute interval, and 50.3 % in case of 5 minutes interval. 2. Mean distribution rate of fish at the illuminated section: \circled1 Distribution rates at interval of 1 minute were 9.8 % in 1 W, 6.5 % in 0.8 W and 5.1 % in 0.5 W, respectively. \circled2 Distribution rates at interval of 5 minutes were 15.6 % in 1 W, 8.5 % in 0.5 W and 6.1 % in 0.8 W, respectively. 3. Attracting rates of the last section showed a little increasing as illuminating time elapsed. A difference of attracting rates according to lighting source in 5 minutes interval were bigger than that in 1 minute interval. 4. Attracting rates of fish in only last section switched on: \circled1 Attracting rates at interval in case of 1 minute were 30.0 % in 0.8 W, 16.0 % in 1 W and 8.0 % in 0.5 W, respectively. \circled2 Attracting rates at interval in case of 5 minutes were 56.0 % in 1 W, 30.7 % in 0.5 W and 10.7 % in 0.8 W. respectively.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.627-631
• /
• 2005

The $(La_{0.8}Sr_{0.2})_{0.95}MnO_3$/yttria-stabilized zirconia (LSM/YSZ) composites were investigated as anode materials for high temperature steam electrolysis using X-ray diffractometry, scanning electron microscopy, galvanodynamic and galvanostatic polarization method. For this purpose, the LSMperovskites were fabricated in powders by co-precipitation method and then were mixed with 8 mol% YSZ powders in different molar ratios. The LSM/YSZ composites were deposited on 8 mol% YSZ electrolyte disks by means of a screen printing method, followed by sintering at temperatures above $1,100^{\circ}C$. From the experimental results, it is concluded that the electrochemical properties of LSM and the LSM/YSZ composites are closely related to their microstructure and operating temperatures.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.463-468
• /
• 2023

In this paper, we proposed reconfigurable dual polarization patch array antenna that can select two polarizations(Vertical, RHCP) using defected ground structure and Pin diode. The proposed antenna was designed arranging a circular polarization patch antenna implemented with a square microstrip patch and two slots 3x3 at 25.8mm placed, a half-wavelength of 5.8 GHz. Conect the pin diode and the capacitor to the slot diagonally placed on the ground of each antennas, and select polarization using the open/short operating according to the application of DC voltage to the pin diode. As a result of the design, the gain of the antenna is 11.7 dBi at vertical polarization and 11.6 dBic at RHCP. The axial ratio is 20.3 dB at 1.8 dB vertical polarization at RHCP. Mutual Coupling is Maximum to -20.8 dB for vertical polarization and Maximum to -30.1 dB for RHCP.

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.1
• /
• pp.31-39
• /
• 2011

Purpose: Helical Tomotherapy allows only coplanar beam delivery because it does not allow couch rotation. We investigated a method to introduce non-coplanar beam by tilting a patient's head for Tomotherapy. The aim of this study was to compare intrafractional movement during Tomotherapy between coplanar and non-coplanar patient's setup. Materials and Methods: Helical Tomotherapy was used for treating eight patients with intracranial tumor. The subjects were divided into three groups: one group (coplanar) of 2 patients who lay on S-plate with supine position and wore thermoplastic mask for immobilizing the head, second group (non-coplanar) of 3 patients who lay on S-plate with supine position and whose head was tilted with Variable Axis Baseplate and wore thermoplastic mask, and third group (non-coplanar plus mouthpiece) of 3 patients whose head was tilted and wore a mouthpiece immobilization device and thermoplastic mask. The patients were treated with Tomotherapy after treatment planning with Tomotherapy Planning System. Megavoltage computed tomography (MVCT) was performed before and after treatment, and the intrafractional error was measured with lateral(X), longitudinal(Y), vertical(Z) direction movements and vector ($\sqrt{x^2+y^2+z^2}$) value for assessing overall movement. Results: Intrafractional error was compared among three groups by taking the error of MVCT taken after the treatment. As the correction values (X, Y, Z) between MVCT image taken after treatment and CT-simulation image are close to zero, the patient movement is small. When the mean values of movement of each direction for non-coplanar setup were compared with coplanar setup group, X-axis movement was decreased by 13%, but Y-axis and Z-axis movement were increased by 109% and 88%, respectively. Movements of Y-axis and Z-axis with non-coplanar setup were relatively greater than that of X-axis since a tilted head tended to slip down. The mean of X-axis movement of the group who used a mouthpiece was greater by 9.4% than the group who did not use, but the mean of Y-axis movement was lower by at least 64%, and the mean of Z-axis was lower by at least 67%, and the mean of Z-axis was lower by at least 67%, and the vector was lower by at least 59% with the use of a mouthpiece. Among these 8 patients, one patient whose tumor was located on left frontal lobe and left basal ganglia received reduced radiation dose of 38% in right eye, 23% in left eye, 30% in optic chiasm, 27% in brain stem, and 8% in normal brain with non-coplanar method. Conclusion: Tomotherapy only allows coplanar delivery of IMRT treatment. To complement this shortcoming, Tomotherapy can be used with non-coplanar method by artificially tilting the patient's head and using an oral immobilization instrument to minimize the movement of patient, when intracranial tumor locates near critical organs or has to be treated with high dose radiation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.1
• /
• pp.41-60
• /
• 1983

Experiments were conducted to study the effect of stage of maturity at harvest on the quality of silage. Herbage samples taken from the barley plant, rye plant, wheat plant, oat plant, Orchardgrass, Italian ryegrass, a mixed grass sward of Orchardgrass and Italian ryegrass and corn plant at different stages of maturity and ensiled in order to evaluate the effect of maturity on the chemical composition and feeding value as well as digestibility using sheep. Forage material were ensiled in small concrete silo. 1. The dry matter yield per 10a increased with advancing the maturity. Yield of brarley plant was 404, 635 and 900 kg at heading, milk and milk dough stage, respectively. Rye plant yield was 279, 589, 708, 10,000, 1,265, 1,376 and 1,492 kg at booting, before heading, early heading, late heading, early flowering, late flowering and after flowering stage, respectively. Italian ryegrass yield was 355, 613, 844 and 1,109 kg at vegetative, booting, heading and flowering, respectively. Orchardgrass/Italian ryegrass production was 477, 696, 891 and 1,027 kg at before was 458, 1,252, 1,534, 1,986 and 2,053 kg at tassel, early milk, yellow ripe and ripe stage, respectively. 2. Dry matter content increased with advancing maturity, but crude protein declined markedly. The NFE content decreased with advancing maturity of all the herbages except corn plant where NFE content increased, but corn plant increased. The content of crude fiber increased with advancing maturity except corn plant. The content of crude ash decreased with advancing maturity. In the rye plant, the content of neutral detergent fiber (NDF), acid detergent fiber (ADF) and cellulose increased with advancing maturity. 3. In vitro dry matter digestibilities of the rye plant was 53.6, 54.1, 50.7, 47.1, 44.9, 40.1 and 38.9% booting, before hcading, early heading, late heading, early flowering, late flowering and after flowering stage, respectively. The regression equation was $Y=56.22-0.74X+0.009X^2$ (X=cutting date from the first cut, Y=dry matter digestibilities). 4. In vitro digestible dry matter yield (kg/10a) of rye plant increased with advancing maturity, but declined from the flowering stage. The regression equation was $Y=168.88+26.09X-0.41X^2$ (X=cutting date from the first cut). 5. In vitro digestibility of dry matter in the corn plant was 69.2, 71.5, 69.8 and 69.9% at tassel, early milk, milk and yellow ripe stage, respectively. 6. The digestibility of crude protein and crude fiber of all plants decreased with advancing matuity, but NFE of the barley and corn generally increased. 7. The TDN contents on the dry matter basis decreased, but those of barley and corn silage were not different. TDN content of barley was 57.8, 57.1 and 57.9% at heading, milk and milk dough stage, respectively. That of rye silage was 50.0, 27.2 and 43.7% at early flowering, after flowering and milk stage, respectively. Italian ryegrass silage was 67.9, 63.7, and 54.9% at before heading, early heading and after heading, respectively. In case of Orchardgrass silage the TDN was 54.8, 52.9 and 46.1% at after heading, after flowering and milk, respectively. Corn shows TDN value of 59.5, 62.8 and 61.6% at milk, yellow ripe and ripe, respectively. 8. The pH value increased slightly by advancing maturity. 9. the content of organic acid decreased by advancing maturity and also increasing the DM content.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.847-860
• /
• 2020

This study was conducted into combustion characteristics and gases generated by the combustion of charcoal and agglomerated charcoal distributed in the domestic using a combustion chamber based on the average space per crater of a charcoal-grilled restaurant in South Korea. Each of the three types of charcoals and agglomerated wood charcoals was analyzed for fuel and combustion characteristics. In addition, the concentration changes of CO, CO₂, NO_x, and O₂ were measured for 20 minutes depending on ventilation. As a result, CO yield without ventilation was measured in the range of 1390 to 4703 ppm, and CO yield with ventilation decreases about 29.8% to 57.4%. CO₂ yield without ventilation was measured in the range of 1.34% to 2.42%, and CO₂ yield was about 44.1% to 53.6% when the emission was more than about 1.5% at 10 minutes. The NOx yield was divided into two cases where the NO_x yield was continuously increased because of incomplete combustion, emitted ranging from 29 ppm to 47 ppm, and where emission was constant after 1 minute in the range of 9 ppm to 18 ppm. The NO_x yield with ventilation tends to be similar to the without ventilation, and NO_x yield decreases up to 62.5%. Therefore, it could be used for health risk assessment with the simulation of the usage environment of charcoal and agglomerated wood charcoal.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.488-498
• /
• 2000

Molecular bottle-brush was prepared by hydrogen-bonding between poly(4-vinylpyridine)(P4VP) as main chain and 3-pentadecylphenol (PDP) as amphiphilic side chain. Variation of long period ( $L_{p}$), order-disorder transition temperature ( $T_{ODT}$) and mesomorphic structure of bottle-brush were investigated by changing various mole ratio (x) of pyridine group in P4VP and PDP and molecular weight of P4VP. Upper critical solution temperature (UCST) behaviour was observed. For x 0.8-0.9, maximum critical temperature was found. As molecular weight of P4VP was increased, phase transition occurred at higher temperature. It was found that phase behaviour of the bottle-brush was affected by mobility of P4VP as well as size and regularity of lamellar structure. The $L_{p}$ determined from analysis of crystal structure was in the range of 35 $\AA$ and 40 $\AA$ and was more affected by the molecular weight of P4VP than by mole ratio (x). However, if the molecular weight of P4VP was high, LP value was little affected.ted.d.

• Food Science and Preservation
• /
• v.21 no.3
• /
• pp.315-320
• /
• 2014

This study evaluated the effects of a gamma ray (GR), electron beam (EB), and X-ray (XR) to improve the safety of black pepper powder. The black pepper powder was irradiated by GR, EB, and XR at 2, 4, 6, 8, and 10 kGy. The results of the total bacterial populations in the black pepper power sample showed a similar effect on microbial decontamination for radiation sources. Radiation sensitivity ($D_{10}$ value) on the initial bacteria loads in the sample was 2.24 kGy in GR, 2.37 kGy in EB, and 2.75 kGy in XR. In addition, there were no differences among the radiation sources. The color values, such as L (lightness), a (redness), and b (yellowness), were not changed significantly. The sensory characteristics of GR, EB, and XR irradiated black pepper powder were decreased when the radiation dose increased, but there was no significant changes among the radiation sources. The results can be applied to investigate the effects of radiation sources on the microbiological and sensory characteristics of black pepper powder.

• Korean journal of applied entomology
• /
• v.20 no.4 s.49
• /
• pp.217-222
• /
• 1981

As a primary study on the economic injury level of A. tokionis larval populations in tobacco fields, we carried out some experiments for the evaluation of sampling efficiency of 3 sampling methods (pit-fall traps of apple pomace and rice bran, and clover patches) for the larval population and the regressions between loss and infested larval density The $10\times10cm$ clover patch showed a better sampling efficiency $11.8\;to\;18.0\%$ than the others. The sampling efficiency of clover patch becomes higher when the plots did not have any green plants. The linear regression equation (Y=4.2+1.383x) between loss (Y:kg/10a) and infested larval density (X: no. of larvae/plot) which was obtained by substitution of damage ratio and corrected damage ratio fitted the observed data better than the one (Y=2.68X) obtained without substitioning.