• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2160-2170
• /
• 1991

Three-dimensional turbulent structures in the near field of elliptic jet were experimentally investigated by using a three-color, three-component Laser Doppler Velocimeter. The Reynolds number based on the nozzle exit velocity and nozzle equivalent diameter(De) was about 4*10$^{4}$. The turbulent characteristics of a sharp-edged elliptic nozzle with aspect ratio of 2 were analyzed along major and minor axis at X/De=2,3,5,7 and along the centerline up to X/De=14. Quantities measured at each point with the 3-D LDV system were three orthogonal velocity components, turbulent intensity, skewness, flatness, and Reynolds shear stress. The nondimensional mean velocities coincided well with the Schlichting's empirical curve with going downstream. Elliptic jet of AR=2 had two switching points at about X/De=2 and 16. The turbulent intensity along the minor axis was distributed widely than that along the major axis. In the near field, X/De<5, the Reynolds shear stresses of the inner part of the elliptic jet had negative value, which indicated the enhancement of entrainment toward the inner part.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.275-282
• /
• 1998

In this paper, we designed and fabricated 5-stage microwave solid state power amplifier using balanced amplifier scheme for X-band electronic radar reflector. The used substrate is FR4 and the used active devices are FHX35LC, FLK012WF and FLK022WG. The circuit design and optimization had been carried out through the microwave CAD program CNL2 The measured values show 46dB in gain, input return loss -14.2dB, output return loss -16.6dB and IM3 is 32dBc at designed bandwidth. The measured results are almost agreed with the simulated values.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.209-217
• /
• 2012

In this paper, I proposed new system that a user makes modeling 3D symmetric pottery using mouse and can confirm the result immediately in internet browser. The main advantage of proposed system is that users who have no specialized knowledge about 3D graphic can easily create 3D objects. And a user can use it that has only PC connected network and mouse without additional devices as like expensive haptic and camera device. For developing proposed system, VRML/X3D that is International Standard language for virtual reality and 3D graphics was used. Because it was born based on internet that is different from other 3D graphic languages, it was able to interact and navigate with users. With those features and high completeness of 3D pottery realization using mouse considered, the system may be useful and is superior in performance to other pottery modeling system.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.168-171
• /
• 1988

The p-n homo junction diode of the III-V ternary alloy semiconductor $In_{1-x}Ga_xP$ : S grown by the temperature gradient solution (TGS) was fabricated by Zn-diffusion, and it's characteristics was investigated. The carrier concentration of $In_{1-x}Ga_xP$ doped with sulfur, 0.5 mol %, was $1{\times}10^{17}cm^{-3}$ and the mobility was varied with the composition. In the case that the diffusion time was constant as 30 minutes. The temperature dependence of diffusion coefficient was decreased from D= $4.2{\times}10^{-5}$ exp (-1.74/$k_{B}T$) to D= $2.5{\times}10^{-5}$ exp (-3.272/$k_{B}T$) with increasing of composition $\times$ from 0.43 to 0.98. The major peak of E.L spectrum was due to D-A pair recombination and the peak intensity was increased with the increasing of input current. And the E.L intensity was decreased with the increasing temperature, and shift to the long wavelength. The luminescence efficiencies measured at $5^{\circ}C$, atmosphere temperature, was decreased from $2.6{\times}10^{-4}$% to $9.49{\times}10^{-6}$ % with increasing of composition it from 0.39, direct transition region, to 0.98, indirect transition region.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.783-786
• /
• 2004

We have developed a 470 x 235ppi poly-Si TFT LCD with a novel pixel arrangement, called HDDP (Horizontally Double-Density Pixels), for high-resolution 2D and 3D autostereoscopic display. 3D image quality is especially high in a lenticular-lens-equipped 3D mode because both horizontal resolution and vertical resolution are high, and because these resolutions are equal. 3D and 2D images can be displayed simultaneously in the same picture. In addition, 3D images can be displayed anywhere and 2D characters can be made to appear at different depths with perfect legibility. No switching of 2D/3D modes is necessary, and the design's thin and uncomplicated structure makes it especially suitable for mobile terminals.

• Korean Journal of Materials Research
• /
• v.13 no.1
• /
• pp.48-52
• /
• 2003

The substituted yttrium iron garnet systems $Y_{ 3-x}$/Gd$_{x}$X$0.2_{0.2}$ $Fe_{4.8}$ $O _{12}$ (x = 0.2, 0.4, 0.6) have been investigated by means of X-ray diffraction, Mossbauer spectroscopy and SQUID. The X-ray diffraction patterns at room temperature confirm the samples to have a single phase of the garnet structure over the whole composition range. The lattice constants of all the samples linearly change with increasing x due to the size of substituted ions in the dodecahedral sites. $Y_{3-x}$ $Gd_{x}$ X$Fe_{4.8}$ $In_{0.2}$ $O_{12}$ system which $Y_{3-x}$ ions are substituted with Gd$^{ 3＋}$ ions, the Mossbauer spectrum consists of three Zeeman sextets at room temperature, one due to the $Fe^{3＋}$ ions on the octahedral(a-) sites and the others due to the $Fe^{3＋}$ ions on the tetrahedral(d-, d'-) sites, respectively. From the hysteresis loop measured by means of SQUID over the whole composition range, the saturation magnetization $M_{s}$ and magnetic moments $\mu_{ B}$ per unit cell have been obtained. The increment of Gd-ion content causes $M_{s}$ and $\mu_{B}$ decrease while the increment of In-ion content does not.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.6
• /
• pp.528-533
• /
• 2012

Objective : In the pediatric population the skull has not yet undergone ossification and it is assumed that the diagnostic rate of skull fractures by simple X-rays are lower than that of adults. It has been recently proposed that the diagnostic rates of skull fractures by 3-dimensional computer tomography (3D-CT) are higher than simple X-rays. The authors therefore attempted to compare the diagnostic rates of pediatric skull fractures by simple X-rays and 3D-CTs with respect to the type of fracture. Methods : One-hundred patients aged less than 12 years who visited the Emergency Center for cranial injury were subject to simple X-rays and 3D-CTs. The type and location of the fractures were compared and Kappa statistical analysis and the t-test were conducted. Results : Among the 100 pediatric patients, 65 were male and 35 were female. The mean age was $50{\pm}45$ months. 63 patients had simple skull fractures and 22 had complex fractures, and the types of fractures were linear fractures in 74, diastatic fractures 15, depressed fractures in 10, penetrating fracture in 1, and greenstick fractures in 3 patients. Statistical difference was observed for the predictive value of simple skull fractures' diagnostic rate depending on the method for diagnosis. A significant difference of the Kappa value was noted in the diagnosis of depressed skull fractures and diastatic skull fractures. Conclusion : In the majority of pediatric skull fractures, 3D-CT showed superior diagnosis rates compared to simple skull X-rays and therefore 3D-CT is recommended whenever skull fractures are suspected. This is especially true for depressed skull fractures and diastatic skull fractures.

• Bulletin of the Korean Mathematical Society
• /
• v.23 no.2
• /
• pp.103-111
• /
• 1986

In [2] and [3], the Shinwon polynomial S$_{n}$(x) of order n is defined and studied in some details. In this paper we will define the general Shinwon polynomial S$_{n}$(a,x) and the Dickson polynomial D$_{n}$(a,x) of the second kind of order n which is a slightly changed form of the Dickson polynomial g$_{n}$(a,x), and show that D$_{n}$(a,x) is closely related to S$_{n}$(a,x).EX> n/(a,x).

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1327-1334
• /
• 2004

The purpose of this paper is to implement Web 3D environment that is not provider - oriented but client-oriented in order to provide dynamic information and to analyze knowledges by executing programs on Web pages. For these, The 3D Viewer program that parses and renders ASE files - the most general 3D Model Data file and exported text file of 3D Max Studio - is made and then converted into ActiveX 3D Viewer Component that can be used on the Web. With the purpose of managing ASE and texture file efficiently and interacting between clients and server, ActiveX Component link ASP and Database with Web Service. The 3D View Web Service can make dynamic information and cooperative works easier in Networked Virtual Reality.

• Computers and Concrete
• /
• v.18 no.3
• /
• pp.319-336
• /
• 2016

In this study, both two- and three-dimensional (2D and 3D) finite-volume-based models were developed to analyze the heat transfer mechanisms through the porous structures of cellular concretes under steady-state heat transfer conditions and to investigate the differences between the 2D and 3D modeling results. The 2D and 3D reconstructed pore networks were generated from the microstructural information measured by 3D images captured by X-ray computerized tomography (X-CT). The computed effective thermal conductivities based on the 2D and 3D calculations performed on the reconstructed porous structures were found to be nearly identical to those evaluated from the 2D cross-sectional images and the 3D X-CT images, respectively. In addition, the 3D computed effective thermal conductivity was found to agree better with the measured values, in comparison with the 2D reconstruction and real cross-sectional images. Finally, the thermal conductivities computed for different reconstructed porous 3D structures of cellular concretes were compared with those obtained from 2D computations performed on 2D reconstructed structures. This comparison revealed the differences between 2D and 3D image-based modeling. A correlation was thus derived between the results of the 3D and 2D models.