• 제목/요약/키워드: X10

검색결과 25,595건 처리시간 0.045초

ACCRETION-JET MODEL FOR THE HARD X-ray Γ - LX CORRELATION IN BLACK HOLE X-ray BINARIES

  • YANG, QI-XIANG;XIE, FU-GUO;YUAN, FENG;ZDZIARSKI, ANDRZEJ A.;GIERLINSKI, MAREK;HO, LUIS C.;YU, ZHAOLONG
    • 천문학논총
    • /
    • 제30권2호
    • /
    • pp.565-568
    • /
    • 2015
  • In this work, we study the correlation between the photon index (${\Gamma}$) of the X-ray spectrum and the 2-10 keV X-ray luminosity ($L_X$) for black hole X-ray binaries (BHBs). The BHB sample is mainly from the quiescent, hard and intermediate states, with values of $L_X$ ranging from ${\sim}10^{30.5}$ to $10^{37.5}$ erg $s^{-1}$. We find that the photon index ${\Gamma}$ is positively or negatively correlated with the X-ray luminosity $L_X$, for $L_X$ above or below a critical value, ${\sim}10^{36.5}$ erg $s^{-1}$. This result is consistent with previous works. Moreover, when $L_X{\leq}{\sim}10^{33}$ erg $s^{-1}$, we found that the photon index is roughly independent of the X-ray luminosity. We interpret the above correlations in the framework of a coupled hot accretion flow - jet model. Besides, we also find that in the moderate-luminosity region, different sources may have different anti-correlation slopes, and we argue this diversity is caused by the different value of ${\delta}$, which describes the fraction of turbulent dissipation that directly heats electrons.

수평식 연속주조 시스템을 이용한 Al-xSi(x=10-15%)합금 수평연주에 관한 연구 (A study on the Horizontal Continuous Casting by Horizontal Continuous Casting Machine of Al-xSi(x=10-15%) Aluminum Alloy)

  • 서희식;하상백
    • 한국산업융합학회 논문집
    • /
    • 제17권3호
    • /
    • pp.122-135
    • /
    • 2014
  • This paper was studied on the horizontal continuous casting of Al-xSi(x=10~15%) aluminum alloy. The experiments of the horizontal continuous casting was carried out by the horizontal continuous casting machine for various casting conditions and investigated on fracture types and mechanisms. Surface defect types for the horizontal continuous casting is also investigated. And the study was carried out that the horizontal continuous casting conditions such as casting temperature, cooling rate, and drawing speed affect the hardness and primary silicon size of Al-xSi(x=10~15%) aluminum rod bar. Casting temperature within this experiment conditions don't affect on the hardness of rod bar but the higher casting temperature is the smaller primary silicon size. The higher cooling rate and drawing speed have the higher hardness and the smaller primary silicon size.

AlxGal-xN/GaN 에피층의 비정상적인 광발광과 Persistent Photoconductivity 현상 (Anomalous Photoluminescence and Persistent Photoconductivity of AlxGal-xN/GaN Epilayers)

  • 정상조;전용기
    • 한국재료학회지
    • /
    • 제13권10호
    • /
    • pp.673-676
    • /
    • 2003
  • We have investigated $Al_{x}$ $Ga_{l-x}$ N/GaN epilayers (x = 0.08, 0.15) grown by metal organic vapor phase epitaxy on sapphire with photoluminescence(PL), and persistent photoconductivity(PPC) experiments. An anomalous S-shaped shift behavior of temperature dependencies of PL peak energy is observed for the x = 0.15 sample. In PPC measurement, showed that the dark current recovery time of $Al_{x}$$Ga_{l-x}$ N/GaN epilayers mainly depends on the Al content. These behaviors are usually attributed to the presence of carrier localization states. All these phenomena are explained based on the alloy compositional fluctuations in the $Al_{x}$ /$Ga_{l-x}$ N/ epilayers. The photocurrent quenching observed in PPC measurements for $Al_{x}$ $Ga_{l-x}$ N/ epilayers less than 0.2 $\mu\textrm{m}$ thickness indicates that the presence of metastable state in the bandgap of GaN layer, and that the excess holes in the valence band recombine with free electrons.

Structural and Magnetic Properties of the Brownmillerite $Ca_2Al_xFe_{2-x}O_5$ System

  • 김귀야;로권선;여철현
    • Bulletin of the Korean Chemical Society
    • /
    • 제16권10호
    • /
    • pp.934-938
    • /
    • 1995
  • A series of solid solutions in the Ca2AlxFe2-xO5 (x=0.00, 0.50, 0.66, 1.00 and 1.34) system with brownmillerite structure has been synthesized at 1100 ℃ under an atmospheric air pressure. The solid solutions are analysed by powder x-ray diffraction analysis, Mohr salt titration, thermal analysis, and Mossbauer spectroscopic analysis. The x-ray diffraction analysis assigns the compositions of x=0.00 and 0.50 to the space group Pcmn and those of x=0.66, 1.00, and 1.34 to the Ibm2. Mo&ssbauer spectra have shown the coordination state and disordering of Al3+ and Fe3+ ions. The substituting preference of Al3+ ions for the tetrahedral site decreases with increasing x value. Magnetic susceptibility of the system has been measured in the temperature range of 5 K to 900 K. The solid solutions of the compositions of x=0.00, 0.50 and 0.66 have shown a thermal hysteresis and the thermoremanent magnetization gap decreases with increasing x value in the above systems. However the compositions of x=1.00 and 1.34 do not show the hysteresis. The exchange integral is calculated from Fe3+ ion occupancy ratio. The integral decreases with x value and thus the magnetic transition temperature decreases with the increasing x value.

고에너지볼밀링을 이용한 MnFeP1-xAsx 나노분말의 합성 (Synthesis of MnFeP1-xAsx Nanocrystalline Powders by High-Energy Ball Milling)

  • 조영환
    • 한국분말재료학회지
    • /
    • 제10권2호
    • /
    • pp.129-135
    • /
    • 2003
  • Nanocrystalline powders of $MnFeP_{1-x}As_x$(x=0.45-0.6) have been synthesized by mechanochemical reaction at room temperature using high-energy ball milling from mixtures of Mn, Fe, P, and As Powders. It has been found that a mechanically induced self-propagating reaction (MSR) occurs within 2 hours of milling and it produces very fine polycrystalline powder having a hexagonal $Fe_2P$ structure. Further milling up to 24 hours did not change the crystalline and average particle sizes or the phase composition of the milling product. When x is 0.65, no reaction among the reactants has been observed even after 24 hours of milling. As the P content decreases in $MnFeP_{1-x}As_x$, the incubation time for the MSR has increased and the lattice constants in both a and c axes have changed.

Hexagonal Ferrite에 관한 연구 (I) Ferroxplana $Zn_{I-X}$$Mn_X$Y($Ba_2$$Zn_{2(1-X)}$$Mn_{2X}$$Fe_12$$O_22$)의 자성 (Studies on the Hexagonal Ferrites (I) The Magnetic Properties ofFerroxplana $Zn_{I-X}$$Mn_X$Y($Ba_2$$Zn_{2(1-X)}$$Mn_{2X}$$Fe_12$$O_22$))

  • 김태옥
    • 한국세라믹학회지
    • /
    • 제13권3호
    • /
    • pp.13-20
    • /
    • 1976
  • The magnetic properties, especially the magnetostriction, of ferroxplana $Zn_{1-x}$$M_X$Y(x=0.0, 0.2, 0.4, 0.6) were investigated at room temperature. In general, the Curie temperature and the permeability of ferroxplana $Zn_{1-X}$$Mn_X$Y increased while the amount of the other phase decrease with increased concentration of dopant $Mn^{2+} for $Zn^{2+}. The magnetostriction constnats K1, K2, K3 and K4 for ZnY were +0.3, -5.0, -4.3 and $-4.8{\times}$$10^{-6} while that for 4Zn^0.8$ $Mn^0.2$Y were +2.5, -5.4, -6.0 and $-3.4{\times}10^{-6}$, respectively.

  • PDF

REFLEXIVITY OF NORMED ALMOST LINEAR SPACES

  • Lee, Sang-Han
    • 대한수학회논문집
    • /
    • 제10권4호
    • /
    • pp.855-866
    • /
    • 1995
  • We prove that if a nals X is reflexive, then $X = W_X + V_X$. We prove also that if an als X has a finite basis, then $X = W_X + V_X$ if and only if X is reflexive.

  • PDF

중년기 비만여성에 있어서 건강지표를 위한 비만연령의 개발 (The Development of Obesity Age (OA) for Health Index of Middle Aged Obese Women)

  • 이동준;박태섭
    • 생명과학회지
    • /
    • 제19권10호
    • /
    • pp.1403-1409
    • /
    • 2009
  • 본 연구에서는 중년비만여성을 대상으로 비만의 발생요인으로 예상되는 요인을 이용하여 비만의 상태를 연령 척도화하여 비만연령(Obesity Age: OA)이라는 연령 추정식을 산출함과 동시에 비만도(비만연령)를 실제의 역연령과 검토하였고 비만연령의 추정식은 다음과 같다. OAS (Obesity Age Score)=$0.106*X_1+0.035*X_2+0.048*X_3+0.041*X_4+0.003*X_5-0.037*X_6-10.66$ (1) ($X_1$: BMI, $X_2$: 체중, $X_3$: 체지방률, $X_4$: 배둘레, $X_5$: 중성지방, $X_6$: $VO_{2max}$) OA (Obesity Age)=7.3*OAS+49.6*(-1) (2) Z=(CA-49.6)(1-0.03) (3) OAc (Obesity Age corrected)=1.03*CA-7.3*OAS+1.47 (4) 그리고 역연령과 추정된 비만연령(Obesity Age corrected: OAc)의 비교에서는 유의한 차이를 나타내지 않아 타당성이 확인되었으며, 총 6개의 측정항목으로 구성된 비만연령을 통해 비만자 개개인의 비만건강도(상태)를 용이하게 평가할 수 있을 것으로 기대하며, 추후에는 다른 집단에서의 적용가능 여부를 알아보기 위해 교차타당성을 검토해야할 것이라고 사료된다.

다결정 Ge1-xMnx 박막에서 Ge3Mn5 상의 형성과 특성 (Formation of Ferromagnetic Ge3Mn5 Phase in MBE-grown Polycrystalline Ge1-xMnx Thin Films)

  • 임형규;찬티난안;유상수;백귀종;임영언;김도진;김효진;김창수
    • 한국자기학회지
    • /
    • 제19권3호
    • /
    • pp.85-88
    • /
    • 2009
  • 다결정 $Ge_{1-x}Mn_x$ 박막의 자기적 상들에 관한 연구가 이루어졌다. Molecular beam epitaxy(MBE) 장비를 이용해 $400^{\circ}C$ 에서 $Ge_{1-x}Mn_x$ 박막을 성장시켰다. $Ge_{1-x}Mn_x$ 박막의 캐리어 유형은 P타입 이였고, 전기 비저항 값은 $4.0{\times}10^{-2}{\sim}1.5{\times}10^{-4}ohm-cm$이었다. 자기적인 특성과 미세구조의 분석에 기초하여 $Ge_{1-x}Mn_x/SiO_2$/Si(100) 박막에 310 K 이내의 큐리에온도를 지닌 강자성의 $Ge_3Mn_5$ 상이 형성되었음을 알 수 있었다. 게다가, $Ge_3Mn_5$ 상이 형성된 $Ge_{1-x}Mn_x$ 박막은 20 K, 9 T의 자기장에서 약 9%의 음의 자기저항을 보였다.

Fe-22Cr-5Al-X(X=Zr,Y)합금의 고온 부식거동에 관한 연구 (A Study on the Behaviour of High Temperature Corrosion of Fe-22Cr-5Al-X(X=Zr,Y))

  • 이병우;박흥일;김중선;이광학;김흥식
    • 한국재료학회지
    • /
    • 제7권10호
    • /
    • pp.898-907
    • /
    • 1997
  • Fe-22Cr-5AI-X(X=Zr, Y)합금을 1143K, 고온 황화(P$s_{2}$=1.11x$10^{-7}$atm, P$O_{s}$ =3.11x$10^{-20atm}$) 및 황화/산화 (P$s_{2}$=8.31x$10^{-8}$atm, P$O_{s}$ =3.31x$10^{-18atm}$) 환경의 복합가스 분위기에서 1-30시간동안 노출하여 합금표면에 형성된 부식층을 관찰하여 SEM/EDS로 분석하였다. Fe-22Cr-5AI합금은 고온 부식환경에서 부식 생성물의 성장은 포물선법칙을 따르고 주요 성분은 결함이 많고 다공질인 철과 크롬의 황화물[(Fe, Cr)Sx]이므로 고온 내식성이 감소하였다. Zr을 1wt%첨가한 Fe-22Cr-5AI합금의 고온 부식거동은 Y을 1wt%첨가한 합금과 비슷한 거동을 나타내었다. 황화환경에서는 Cr의 선택 황화에 의한 크롬 황화물(CrS)이 생성되고 노출시간의 경과에 따라 (Fe, Cr)Sx나 (Cr, Fe)Sx 등의 황화물의 성장으로 고온 내식성이 감소하였다. 그러나 황화/산화환경에서는 초기에는 알루미늄산화물(A $I_{2}$ $O_{3}$)및 지르코늄산화물(Zr $O_{2}$)등이 생성되어 보호적이었으나 15시간이후 부터 (Fe, Cr)Sx나 (Cr, Fe)Sx 의 황화물의 성장으로 고온 내식성이 감소하였다.

  • PDF