• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1006-1009
• /
• 2006

The chemical structure of the interface between Ag with $Li_2O$ and tri (8-hydroxyquinoline) aluminum (Alq) was investigated by using in-situ characterization of x-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). $Li_2O$ on Ag had lower barrier height than LiF on Ag. XPS and UPS results show the interaction between $Li_2O$ and Alq leads to gap state formation in HOMO of Alq.

• Transactions on Electrical and Electronic Materials
• /
• 제3권3호
• /
• pp.29-33
• /
• 2002

A procedure was developed for preparing bulk carbon nitride crystals from a polymeric $\alpha$ -C$_3$N$\_$4.2/ at high pressure and temperature in the presence of seeds of crystalline carbon nitride films prepared by a high voltage discharge plasma combined with pulsed laser ablation of graphite target. The samples were evaluated by x-ray photoelectron spectroscopy (XPS), infrared (IR) spectroscopy, Auger electron spectroscopy (AES), secondary-ion mass spectrometry (SIMS), scanning electron microscopy (SEM) and x-ray diffraction (XRD). Notably, XPS studies of the film composition before and after thermobaric treatments demonstrate that the nitrogen composition in $\alpha$ -C$_3$N$\_$4.2/ material initially containing more than 58% nitrogen decreases during the annealing process and reaches a common, stable composition of ~45%. The thermobaric experiments were performed at 10-77 kbar and 350-1200 $\^{C}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.83-86
• /
• 1989

Lead titanate thin films with a perovskite structure were successfully structure were successfully fabricated on titanium substrate by Chemical Vapour Deposition(CVD). Analyses of Auger Electron Spectroscopy(AES) and X-ray Photoelectron Spectroscopy (XPS) have been performed in order to find a chemical composition of lead titanate films. The analysis of chemical composition by AES and XPS was investigated for variations of deposition temperature and Ti(C$_2$H$_{5}$O)$_4$ fractions. The chemical composition of PbTiO$_3$by XPS analysis was almost constant regardless of deposition parameters and the comparison of chemical composition by AES and XPS was performed.d.

• 한국자기학회지
• /
• 제25권5호
• /
• pp.156-161
• /
• 2015

이 연구에서는 X-선 광전자분광법(X-ray photoemission spectroscopy: XPS)을 이용하여 염료감응 태양전지의 전극용 후보 물질에 속하는 $ZnSnO_3$와 $Zn_2SnO_4$의 전자 구조를 연구하였다. 제조된 시료들에 대한 X-선 회절 측정에 의하면 $ZnSnO_3$와 $Zn_2SnO_4$ 시료는 각각 단일상의 ilmenite(IL) 구조와 역스피넬(inverse spinel) 구조를 가지고 있음을 알 수 있었다. Zn 2p와 Sn 3d 내각준위 XPS 측정으로부터 $ZnSnO_3$와 $Zn_2SnO_4$ 두 시료 모두에서 Zn 이온은 2가 (Zn 2+) 상태이며, Sn 이온은 4가 (Sn 4+) 상태임을 알 수 있었다. 한편 얕은 내각준위 XPS 스펙트럼의 측정에서는 $ZnSnO_3$의 Sn 4d와 Zn 3d 내각 준위들의 결합에너지가 $Zn_2SnO_4$에서 보다 다소 작게 관찰되었다. 이 연구로부터 $ZnSnO_3$와 $Zn_2SnO_4$에서의 각 이온의 원자가 상태와 화학적 결합 상태에 대한 정보를 얻을 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2729-2734
• /
• 2009

We report here the surface behavior of zirconium oxide deposited on Si(100) substrate depending on the different substrate temperatures. The zirconium oxide thin films were successfully deposited on the Si(100) surfaces applying radio-frequency (RF) magnetron sputtering process. The obtained zirconium oxide films were characterized by X-ray photoelectron spectroscopy (XPS) for study about the chemical environment of the elements, X-ray diffraction (XRD) for check the crystallinity of the films, spectroscopic ellipsometry (SE) technique for measuring the thickness of the films, and the morphology of the films were investigated by atomic force microscope (AFM). We found that the oxidation states of zirconium were changed from zirconium suboxides ($ZrO_{x,y}$, x,y < 2) (x; higher and y; lower oxidation state of zirconium) to zirconia ($ZrO_2$), and the surface was smoothed as the substrate temperature increased.

• 플랜트 저널
• /
• 제16권3호
• /
• pp.47-52
• /
• 2020

본 연구에서는 알루미늄으로 제작된 심해 장비의 부식 저항 능력 향상시키기 위해 알루미늄 부식 방지 방법과 측정방법을 조사하였다. 조사된 부식 방지 방법은 Cathodic Protection(음극화 보호), Conversion Coating, Anodizing, 및 Organic Coating이었다. 그리고 간단하게 조사된 측정 방법은 Scanning Electron Microscope (SEM), Electrochemical Impedance Spectroscopy (EIS), Glow discharge optical emission spectrum spectroscopy (GD-OES), Fourier Transform Infrared Spectroscopy (FT-IR), Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), Scanning Vibrating Electrode Technique (SVET), Contact Angle(접촉각), Interfacial Tension (경계면 장력)이었다. 알루미늄 부식을 방지하기 위해 널리 사용되는 방법은 Anodizing과 Organic Coating이었으며, 부식 측정을 위해서는 여러 방법들이 골고루 사용되었다. 그 중 많이 사용되는 방법은 표면의 구조를 관찰하 위한 SEM과 부식 저항 능력을 측정하기 위한 접촉각 측정이었다.

• 한국진공학회지
• /
• 제7권3호
• /
• pp.169-175
• /
• 1998

HBr/$Cl_2/He-O_2$ 반응 기체를 이용한 반응성 이온 식각후, 폴리실리콘 표면에 형성된 잔류막을 x-선 광전자 분광법(x-ray photoelectron spectroscopy, XPS)과 전자 현미경 (scanning electron mocroscopy, SEM)을 이용하여 관찰하였다. 그 결과 잔류물은 패턴된 폴 리실리콘의 맨 윗부분에 자존하고 있었으며, 화학 결합 상태는 실리콘 산화물임이 밝혀졌다. 잔류물인 실리콘 산화물의 형성 메카니즘을 규명하기 위하여 원래의 혼합 기체 성분중 한가 지씩의 반응 기체를 제외시켜 가면서 실험하였다. 비록 플라즈마 성질이 다를지라도, 잔류물 은 산소의 존재하에서 잘 형성됨을 알 수 있었는데, 이는 휘발성이 낮은 실리콘-할로겐 화 합물이 산소에 의해 산화됨으로써 형성되는 것으로 이해하게 되었다. 또한 반응성 이온 식 각후 형성된 잔류층은 소자의 전기적 특성과 후처리 공정에 영향을 미치는 것으로 알려져 있어서, 이를 제거하기 위해 습식과 건식 후처리 공정을 도입하여 비교하였다. 그 결과 건식 공정의 경우 기체에 의해 새로운 잔류물이 형성됨을 XPS를 통하여 관찰하였다. 따라서 잔 류물을 제거하고 깨끗한 표면을 얻기 위해서는 습식 공정이 더 적합함을 알았다.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.397-400
• /
• 2010

Zirconium oxide thin films deposited on the p-type Si(100) substrates by radio-frequency (RF) reactive magnetron sputtering with different plasma gas ratios have been studied by using spectroscopic ellipsometry (SE), atomic force microscopy (AFM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The deposition of the films was monitored by the oxygen gas ratio which has been increased from 0 to 80%. We found that the thickness and roughness of the zirconium oxide thin films are relatively constant. The XRD revealed that the deposited thin films have polycrystalline phases, Zr(101) and monoclinic $ZrO_2$ ($\bar{1}31$). The XPS result showed that the oxidation states of zirconium suboxides were changed to zirconia form with increasing $O_2$ gas ratio.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.306.2-306.2
• /
• 2016

Niobium oxide thin films were synthesized by reactive rf magnetron sputtering. The target was metallic niobium with 2 inch in diameter and the substrate was n-type Si wafer. To control the surface properties of the films, Nb oxide thin films were obtained at various mixing ratios of argon and oxygen gases. Nb oxide thin films were analyzed with alpha step, scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The result of alpha step showed that the thickness of Nb oxide thin films were decreased with increasing the oxygen gas ratios. SEM images showed that the granular morphology was formed at 0% of oxygen gas ratio and then disappeared at 20 and 75% of oxygen gas ratio. The amorphous Nb oxide was observed by XRD at all films. The oxidation state of Nb and O were studied with high resolution Ni 2p and O 1s XPS spectra. And the change in the chemical environment of Nb oxide thin films was investigated by XPS with Ar+ sputtering.

• 한국환경과학회지
• /
• 제16권12호
• /
• pp.1431-1437
• /
• 2007

Cobalt titanates($CoTiO_x$), such as $CoTiO_3$ and $Co_2TiO_4$, have been synthesized via a solid-state reaction and characterized using X-ray diffraction(XRD) and X-ray photoelectron spectroscopic(XPS) measurement techniques, prior to being used for continuous wet trichloroethylene(TCE) oxidation at $36^{\circ}C$, to support our earlier chemical structure model for Co species in 5 wt% $CoO_x/TiO_2$(fresh) and(spent) catalysts. Each XRD pattern for the synthesized $CoTiO_3$ and $Co_2TiO_4$ was very close to those obtained from the respective standard XRD data files. The two $CoTiO_x$ samples gave Co 2p XPS spectra consisting of very strong main peaks for Co $2p_{3/2}$ and $2p_{1/2}$ with corresponding satellite structures at higher binding energies. The Co $2p_{3/2}$ main structure appeared at 781.3 eV for the $CoTiO_3$, and it was indicated at 781.1 eV with the $Co_2TiO_4$. Not only could these binding energy values be very similar to that exhibited for the 5 wt% $CoO_x/TiO_2$(fresh), but the spin-orbit splitting(${\Delta}E$) had also no noticeable difference between the cobalt titanates and a sample of the fresh catalyst. Neither of all the $CoTiO_x$ samples were active for the wet TCE oxidation, as expected, but a sample of pure $Co_3O_4$ had a good activity for this reaction. The earlier proposed model for the surface $CoO_x$ species existing with the fresh and spent catalysts is very consistent with the XPS characterization and activity measurements for the cobalt titanates.