• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.109-120
• /
• 2010

The purpose of this study was first to analyze the utilization of dental examination through questionnaire to develop a diagnostic reference level of patient doses for dental radiography in korea. 77 dental institutions were classified into three groups: A group for the dental hospitals of the college of dentistry (11 institutions), B group for dental hospitals (30 institutions) and C group for dental clinics (36 institutions). The results were as follows : The mean numbers of unit chairs and medical staffs were 140.2, 15.3 and 5.8 sets, 112.6, 7.3 and 1.7 dentists, 3.1, 0.5 and no one radiologic technologists, and 19.7, 12.5 and 3.3 dental hygienists in A, B and C groups, respectively. The mean numbers of dental X-ray equipments were 14.64, 3.21 and 2.19 in A, B and C groups, respectively. Intraoral dental X-ray unit was used the most, the following equipments were panoramic, cephalometric, and cone-beam CT units. The most used X-ray imaging system was also digital system (above 50%) in all three groups. Insight dental film (Kodak, USA) having high sensitivity was routinely used for periapical radiography. The automatic processor was not used in many dental institutions, but the film-holding device was used in many dental institutions. The utilization rates of PACS in A, B and C groups were 90.9%, 83.3% and 16.7% respectively, and the PACS software program was used the most PiView STAR (Infinitt, Korea). The annual mean number of radiographic cases in one dental institution in 2008 for A group was 6.8 times and 21.2 times more than those for B and C groups, and periapical and panoramic radiographs were taken mostly. Tube voltage (kVp) and tube current (mA) for periapical radiography were similar in all three groups, but exposure time in C group was 12.0 times and 3.5 times longer than those in B and C groups. The amount of radiation exposure in C group, in which dental hygienists take dental radiographs, was more than those in other groups. The exposure parameters for panoramic radiography were similar in all three groups. In conclusion, the exposure parameters in dental radiography should be determined with reference level, not past experiences. Use of automatic processor and film-holding devices reduces the radiation exposure in film system. The quality assurance of dental equipments are necessary for the reduction of the patient dose and the improvement of X-ray image quality.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.109-117
• /
• 2012

The purpose of this work was to evaluate an amorphous silicon cesium iodide based indirect flat-panel detector (FPD) in terms of their modulation transfer function (MTF), Wiener spectrum (WS, or noise power spectrum, NPS), and detective quantum efficiency (DQE). Measurements were made on flat-panel detector using the International Electrotechnical Commission (IEC) defined RQA3, RQA5, RQA7, and RQA9 radiographic technique. The MTFs of the systems were measured using an edge method. The WS(NPS) of the systems were determined for a range of exposure levels by two-dimensional (2D). Fourier analysis of uniformly exposed radiographs. The DQEs were assessed from the measured MTF, WS(NPS), exposure, and estimated ideal signal-to-noise ratios. Characteristic curve in the RQA3 showed difference in the characteristic curve from RQA5, RQA7, RQA9. MTFs were not differences according to x-ray beam quality. WS(NPS) was reduced with increasing dose, and RQA 3, RQA5, RQA7, RQA9 as the order is reduced. DQE represented the best in the 1mR, RQA 3, RQA5, RQA7, RQA9 decrease in the order. The physical imaging characteristics of FPD may also differ from input beam quality. This study gives an initial motivation that the physical imaging characteristics of FPD is an important issue for the right use of digital radiography system.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.99-106
• /
• 2021

Purpose: In this study, we aimed to manufacture a patient-specific gel phantom combining three-dimensional (3D) printing and polymer gel and evaluate the radiation dose and dose profile using gel dosimetry. Methods: The patient-specific head phantom was manufactured based on the patient's computed tomography (CT) scan data to create an anatomically replicated phantom; this was then produced using a ColorJet 3D printer. A 3D polymer gel dosimeter called RTgel-100 is contained inside the 3D printing head phantom, and irradiation was performed using a 6 MV LINAC (Varian Clinac) X-ray beam, a linear accelerator for treatment. The irradiated phantom was scanned using magnetic resonance imaging (Siemens) with a magnetic field of 3 Tesla (3T) of the Korea Institute of Nuclear Medicine, and then compared the irradiated head phantom with the dose calculated by the patient's treatment planning system (TPS). Results: The comparison between the Hounsfield unit (HU) values of the CT image of the patient and those of the phantom revealed that they were almost similar. The electron density value of the patient's bone and brain was 996±167 HU and 58±15 HU, respectively, and that of the head phantom bone and brain material was 986±25 HU and 45±17 HU, respectively. The comparison of the data of TPS and 3D gel revealed that the difference in gamma index was 2%/2 mm and the passing rate was within 95%. Conclusions: 3D printing allows us to manufacture variable density phantoms for patient-specific dosimetric quality assurance (DQA), develop a customized body phantom of the patient in the future, and perform a patient-specific dosimetry with film, ion chamber, gel, and so on.

• Journal of radiological science and technology
• /
• v.16 no.1
• /
• pp.89-94
• /
• 1993

However, technical advances in ultrasono imaging have had a remarkable impact on the study of biliary system oral cholecystography is a contrast of the gallbladder which is very frequently performed even with the application of Extra Shock Wave Lithotripsy(ESWL) in clinical use. Oral GB requires a stringent preparation if it is to be fully successful and a considerable amount of time to complete all its procedures and its objects of the radiographs. 1) to obtain a firm diagnosis of the presence of gallstones. 2) to essess function of the gallbladder that is, its ability to concentrate and store bile. After a times sequence of X-ray exposures taken in various positions to show the gallbladder to be satisfactorily filled, the patient is given a fatty meal, for instances two eggs or a cup of milk. The gallbladder which is drained by the cystic duct stores and concentrates the bile and is stimulated to contrast and excrete the bile by hormone "cholecystokinin" secreted in the intestinal mucosa. To evaluate the effect of the fatty meal which caused the gallbladder to constrict and empty, and by so doing the contrast medium passes through the cystic and bile ducts which are shown in radiographs exposed from 15-30 minutes after the variety practice of fattymeal, such as soft-boiled 2 eggs, raw 2 eggs, 100g of peanuts, and 200ml of milk. If the concentration of the opaque medium in the gallbladder is adequate, then not only the size, shape and position of the gallbladder will be shown from firms taken at intervals, the rate of concentration of the opaque medium and of the emptying of gallbladder has been measured and analyzed.

• Imaging Science in Dentistry
• /
• v.43 no.3
• /
• pp.185-190
• /
• 2013

Purpose: The aim of the present study was to evaluate the measurement accuracy of endodontic file length on periapical digital radiography after application of noise reduction digital enhancement. Materials and Methods: Thirty-five human single-rooted permanent teeth with canals measuring 20-24 mm in length were selected. ISO #08 endodontic files were placed in the root canals of the teeth. The file lengths were measured with a digital caliper as the standard value. Standard periapical digital images were obtained using the Digora digital radiographic system and a dental X-ray unit. In order to produce the enhanced images, the noise reduction option was applied. Two blinded radiologists measured the file lengths on the original and enhanced images. The measurements were compared by repeated measures ANOVA and the Bonferroni test (${\alpha}=0.05$). Results: Both the original and enhanced digital images provided significantly longer measurements compared with the standard value (P<0.05). There were no significant differences between the measurement accuracy of the original and enhanced images (P>0.05). Conclusion: Noise reduction digital enhancement did not influence the measurement accuracy of the length of the thin endodontic files on the digital periapical radiographs despite the fact that noise reduction could result in the elimination of fine details of the images.

• Journal of radiological science and technology
• /
• v.29 no.3
• /
• pp.133-139
• /
• 2006

By using CR image pixel data, We examined the way how to calculate the MTF and digital characteristic curve. It can be changed to the text-file(Excel) from a pixel data which was printed with a digital x-ray equipment. In this place, We described the way how to figure out and correct the sharpness of a digital images of the MTF from FUJITA. Excel program was utilized to calculate from radiography of slit. Digital characteristic curve, Line Spread Function, Discrete Fourier Transform, Fast Fourier Transform digital specification curve, were indicated in regular sequence. A big advantage of this method, It can be understood easily and you can get results without costly program and without full knowledge of computer language. It shows many different values by using different correction methods. Therefore we need to be handy with appropriate correction method and we should try many experiments to get a precise MTF figures.

• Imaging Science in Dentistry
• /
• v.44 no.1
• /
• pp.15-20
• /
• 2014

Purpose: This study aimed to assess the three-dimensional (3D) facial changes after orthognathic surgery by evaluating the spherical coordinates of facial lines using 3D computed tomography (CT). Materials and Methods: A 19-year-old girl was diagnosed with class III malocclusion and facial asymmetry. Orthognathic surgery was performed after orthodontic treatment. Facial CT scans were taken before and after orthognathic surgery. The patient had a menton deviation of 12.72 mm before surgery and 0.83 mm after surgery. The spherical coordinates of four bilateral facial lines (ramal height, ramal lateral, ramal posterior and mandibular body) were estimated from CT scans before and after surgery on the deviated and opposite side. Results: The spherical coordinates of all facial lines changed after orthognathic surgery. Moreover, the bilateral differences of all facial lines changed after surgery, and no bilateral differences were zero. Conclusion: The spherical coordinate system was useful to compare differences between the presurgical and postsurgical changes to facial lines.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.1 no.1
• /
• pp.105-111
• /
• 2006

Objective : The aim of this study was to evaluate association between lumbar spinal stenosis, one of degenerative diseases, and bone mineral density. Methods : We monitored 9 lumbar spinal stenosis patients in women above 50 years, visiting outpatient clinic of the Jaseng Oriental Medicine Hospital between January 5 2006 and March 31, 2006. They were diagnosed by radiologist ist after taking Magnetic Resonance Imaging(MRI). The cases were Investigated the bone mineral density using Dual Energy X-ray Absorptiomerty(DEXA). and then Picture Archiving Communication System(PACS) were used to assess correlation between lumbar spinal stenosis and bone mineral density. Results : 1. In comparison of the spinal canal area and lumbar spine 2 level bone mineral density, the data showed a significant result 2. The data, between spinal canal area and lumbar spine 1-2 level bone mineral density, indicated a significant result. 3. Also, the result of comparison between spinal canal area and the lowest value of bone mineral density showed significance. Conclusions : It showed that there is a statistically significant correlation between lumbar spinal stenosis and bone mineral density.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.4
• /
• pp.490-493
• /
• 2000

Mesiodens are supernumerary teeth in the region of the maxillary central incisors, a condition which can lead to disorders of the dentition. Their presence may lead to disorders, such as delay in eruption of permanent teeth, development of dentigerous cysts, resorption of adjacent roots and eruption of a supernumerary tooth into nasal cavity. The optimal time for surgical intervention is controversial. Early diagnosis is important so as to enable good prognosis. Diagnosis primarily depends on x-ray films. Panorama film, occlusal film, periapical film have been used for detection of mesiodens. But, all of them have disadvantages. $SCANORA^{(R)}$ is a multimodal radiology system which utilizes the principles of narrow beam radiology and spiral tomography. Pre-programmed imaging procedure are provided for many dental situations An optional personal computer can be connected into the unit to help design the examination. We report two cases diagnosed by $SCANORA^{(R)}$. When compared with tube shift technique, it is simple and exact method of detecting mesiodens.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.7-16
• /
• 1998

The Scanora/sup (R)/ X-ray unit uses the principles of narrow beam radiography and spiral tomography. Starting with a panoramic overview as a scout image. multiple tomographic projections could be selected. This study evaluated the accuracy of spiral tomography in comparison to routine panoramic radiography for dental implant treatment planning. An experimental study was performed on a cadaver mandible to assess the accuracy of panoramic radiography and spiral tomography film images for measurement of metallic spheres. After radiographic images of the metallic spheres on the surgical stent were measured and corrected for a fixed magnification of radiographic images. following results were obtained. 1. In the optimal position of the mandible. the minimal horizontal and vertical distortion was evident in the panoramic radiography images. The mean horizontal and vertical magnification error in anterior sites was 5.25％ and 0.75％. respectively. The mean horizontal and vertical magnification error in posterior sites was 0.50％ and 1.50％. respectively. 2. In the displaced forward or in an eccentric position of the mandible. the magnification error of the panoramic radiography images increased significantly over the optimal position. Overall, the mean horizontal magnification error of the anterior site in the different positions changed dramatically within a range of -17.25％ to 39.00％, compared to the posterior range of -5.25％ to 8.50％. However, the mean vertical magnification error stayed with the range of 0.5％ to 3.75％ for all the mandibular positions. 3. The magnification effects in the tomographic scans were nearly identical for the anterior and posterior with a range of 2.00％ to 5.75％ in the horizontal and 4.50％ to 5.50％ in the vertical dimension, respectively. 4. A statistically significant difference between the anterior and posterior measurements was found in the horizontal measurements of the panoramic radiography images of the displaced forward and backward position of the mandible(P<0.05). Also a significant difference between the optimal panoramic and tomographic projections was found only in the vertical measurement(P<0.05).