• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1661-1664
• /
• 2005

본 논문에서는 computer-aided analysis 의 일환으로 X-ray 심혈관 조영도를 이용하여 관상동맥의 구조를 보여주는 방법에 대해 제시하고자 한다. 관상동맥 폐색증 환자들에게 시술되는 스텐트 삽입 시술이나 관상동맥 우회로 시술을 할 때에는 X-ray 의 조영 영상이 매우 중요한 시술의 기준이 되고 있으며, 조영 영상에서 혈관을 빠르고 정확하게 인식하는 것은 시술의 필수 조건이다. 이러한 시술중의 혈관구조 인식을 돕기 위하여 본 논문에서는 심혈관 조영 영상으로부터 관상동맥의 골격을 추출하기 위한 방법을 제안한다. 본 논문에서는 혈관 구조 추출을 위하여 3 단계 알고리즘을 제시한다. 첫번째 단계에서는 조영도에서 잡음을 제거하기 위하여 동질영역을 블러링할 수 있는 speckle reducing anisotropic diffusion 을 이용한 이미지 필터링을 수행한다. 이 필터링은 영상내 잡음을 제거하고 혈관의 경계선을 강화하여 정확한 영상인식을 가능하게 한다. 두번째 단계에서는 영상 내에서 보여지는 주요 혈관을 분할하는 것이다. 이 영상분할에는 canny edge detection 과 개선된 영역확장법(adaptive region growing)을 동시에 이용하는 복합적 분할기법이 수행된다. 세번째 단계에서는 형태학적 기법(Morphology)을 이용하여 분할결과의 부족한 부분을 보완하고 골격화를 수행하여 정확한 혈관 구조를 추출해낸다. 실험을 위해서는 정상인의 관상동맥 영상 뿐 아니라 혈관이 가늘어지는 폐색이 관찰되는 환자의 영상에 대해서도 실험하였다. 또한 논문에서 제시한 알고리즘에 대한 검증을 위하여 실험 결과들은 의료진의 감수를 거쳤다.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.307-312
• /
• 2008

Rietveld analysis using synchrotron X-ray powder diffraction data collected at 15 K reveals that CFC-13 ($CF_{3}Cl;$ chlorotrifluoromethane) sorbed on Na,K-LSX binds through fluorine to sodium ions around the single 6-ring aperture in the supcrgage.

• Korean Journal of Materials Research
• /
• v.4 no.5
• /
• pp.516-523
• /
• 1994

The interfacial coherency of metal organic chemical vapor deposition grown InGaAsP/InP heterostructure wafers was examined and their influences on the optoelectronic properties were investigated in this study. (400) symmetric and (511) asymmetric reflections were employed to measure the lattice coherency. Existence of misfit dislocations was examined by x-ray topography and reverified by photoluminescence (PL) imaging. PI, measurements were performed, and higher PL intensity was obtained for elastically strained samples and lower intensity for plastically deformed samples. The highest PL intensity was obtained for the sample lattice matched at the growth temperature. PL full-width at half maximum (FWHM) was found to depend on the degree of lattice mismatch. A correlatior between x-ray FWHM and PL intensity was empirically established. The results presented demonstrate that the interfacial coherency is of primary significance in affecting the optoelectronic properties through elastic strain and plastic deformation.

• Journal of Applied Biological Chemistry
• /
• v.58 no.1
• /
• pp.65-74
• /
• 2015

X-ray absorption fine structure (XAFS) analysis using X-ray absorption spectroscopy is being applied as a state-of-the-art method in a wide range of disciplines. This review article summarizes the overall procedure of XAFS analysis from the preparation of soil samples to the analysis of data in X-ray absorption near edge structure (XANES) region and extended Xray absorption fine structure (EXAFS) region. The previous studies on application of XANES and EXAFS techniques in environmental soil science field are discussed and classified them according to metal(loid)s (As, Cd, Cu, Ni, Pb, and Zn). A significant number of previous studies of XAFS application in the environmental soil science field have focused on the identification of Pb chemical species in soil. Moreover, XANES and EXAFS techniques have been widely used to investigate the contamination source via identification of metal species. Similarly, these techniques were applied to identify the mechanisms of metal stabilization in soil after application of various amendments, phytoremediation, etc.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.103-109
• /
• 2006

A target for a high-brightness microfocus x-ray tube, which is based on carbon nanotubes (CNT) as electron source, is designed. The x-ray tube has the following specifications: brightness of $1\times10^{11}phs/s.mm^2. mrad^2$, spot size $\~5{\mu}m$, and average x-ray energy of $20\~40 keV$. In order to meet the specifications, the design parameters of the target, such as configuration, material, thickness of the target as well as the required beam current, were optimized using computer code MCNPX. The design parameters were determined from the calculation of both x-ray spectrum and intensity distribution for a transmission type configuration. For the thin transmission type target to withstand vacuum pressure and localized thermal loading, the structural stability and temperature distribution were also considered. The material of the target was selected as molybdenum(Mo) and the optimized thickness was $7.2{\mu}m$ to be backed by $150{\mu}m$ beryllium (Be). In addition, the calculations revealed that the maximum temperature of the transmission target can be maintained within the limits of stable operation.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.179-184
• /
• 2010

A hard X-ray microscope system for obtaining images of nano-spatial resolution has been widely studied and requires monochromatic X-ray. A multilayer mirror of 84% reflectivity was designed to acquire tungsten characteristic X-ray of 8.4 keV from the white beam generated from an X-ray tube, and the C/W multilayer mirror of $50{\times}50\;mm$ size and 5.65 nm d-spacing was fabricated by the ion-beam sputtering system. The C/W multilayer had a uniformity of 99.5%, and the structure of the multilayer mirror was verified by a TEM image. The obtainable x-ray reflectivity for the C/W multilayer mirror at 8.4 keV was estimated from measuring the X-ray reflectivity using the copper characteristic X-ray of 8.05 keV. Monochromatic X-ray of 8.4 keV was generated by combining a X-ray tube, and the reflectivity and monochromaticity were 77.1% and 0.21 keV, respectively. Monochromatic X-ray generated from the combination of an X-ray tube and an C/W multilayer mirror has enough potential to use X-ray source for hard X-ray microscope system of laboratory size. If the C/W multilayer mirror of d-spacing of a few nanometers can be fabricated, monochromatic X-ray corresponded to 17.5 keV, molybdenum characteristic X-ray, can be obtained and applied to mammography in the medical application.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.406-416
• /
• 2016

바이오와 나노 분야의 비파괴검사는 nm 급의 공간분해능을 요구한다. 바이오와 나노 물질의 내부구조의 비파괴 분석을 위한 공간분해능을 nm급으로 향상시키는Soft X-ray현미경 및 초음파현미경에 대한 기술을 소개한다. 세포생물(Biology)의 단백질구조분석, 수문학(Hydrology)연구, 나노입자거동 등의 연구를 위해서 중성자현미경기술개발 및 현황을 소개하고자 한다. 초음파현미경, Soft X-ray현미경 및 중성자현미경에 대하여 Hybrid 이용자 지원 체계를 구축하여 나노 및 Bio 물질 내부구조 분석기술을 확립하여 지원하고자 한다.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.1
• /
• pp.51-58
• /
• 2023

In this paper, we propose an organ segmentation technique for the automatic extraction of medical diagnostic indicators from X-ray images. In order to calculate diagnostic indicators of heart disease and spinal disease such as VHS(vertebral heart scale) and Cobb angle, it is necessary to accurately segment the thoracic spine, carina, and heart in a chest X-ray image. A deep neural network model in which the high-resolution representation of the image for each layer and the structure converted into a low-resolution feature map are connected in parallel was adopted. This structure enables the relative position information in the image to be effectively reflected in the segmentation process. It is shown that learning performance can be improved by combining the OCR module, in which pixel information and object information are mutually interacted in a multi-step process, and the channel attention module, which allows each channel of the network to be reflected as different weight values. In addition, a method of augmenting learning data is presented in order to provide robust performance against changes in the position, shape, and size of the subject in the X-ray image. The effectiveness of the proposed theory was evaluated through an experiment using 145 human chest X-ray images and 118 animal X-ray images.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.465-471
• /
• 2021

Dual-energy X-ray imaging (DEI) techniques can provide X-ray images that a certain material is suppressed or emphasized by combining two X-ray images obtained from two different x-ray spectrum. In this paper, a single-shot DEI, which uses stacked two detectors (i.e., multilayer detector), is proposed to reduce the patient dose and increase throughput in angiography. The polymethyl methacrylate (PMMA) and aluminum (Al) were selected as two basis materials for material decomposition, and material-specific images are reconstructed as a vector combination of these two materials. We investigate the contrast and noise performance of material-decomposed images using iodine phantoms with various concentrations and diameters. The single-shot DEI shows comparable performances to the conventional dual-shot DEI. In particular, the single-shot DEI shows edge enhancement in material-decomposed images due to the different spatial-resolution characteristics of upper and lower detectors. This study could be useful for designing the multilayer detector including scintillators and energy-separation filter for angiography purposes.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.19-23
• /
• 2008

The mixed ferrite $V_xFe_{3-x}O_4$(x=0.0, 0.15, 0.5, 1.0) thin films were prepared by sol-gel method. Their crystallographic and magnetic hyperfine properties have been studied using X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS) and conversion electron $M\"{o}ssbauer$ spectroscopy(CEMS). The crystal structure is found to be cubic spinel throughout the series($x{\leq}1.0$), and the lattice parameter $a_0$ increases linearly with increasing V content. XRD, XSP and CEMS indicate that $V^{3+}$ substitution for $Fe^{3+}$ in B-site is superior to $V^{2+}$ substitution for $Fe^{2+}$ in B-site. It is noticeable that both quadrupole shift and hyperfine field decreases with increasing V composition, suggesting the change of local symmetry and accompanying line-broadening. The line-broadening on CEMS spectra can be explained by the distribution of magnetic hyperfine fields.