• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.116.1-116.1
• /
• 2013

포항가속기연구소 저장링에는 Dipole Magnet, Wiggler, Undulator 등 다양한 방사광발생장치를 설치하여 각종 실험에 사용하고 있다. 그중 ADC사에서 제작한 In- vacuum Undulator (이하, ADC-IVU)는 고휘도의 X-선 빔을 생성하여 생체고분자(단백질, DNA 등) 단결정의 X-선 회절 데이터를 획득하는 실험을 수행한다. 현재, ADC-IVU의 Rf finger 등 일부장치의 성능개선을 위한 장치 해체, 교체 작업과 재조립 및 정렬작업, 구동시험을 거치고 최종 초고진공 진공 달성을 위한 탈가스처리, NEG 활성화작업등을 마무리 하였다. 본 발표에서는 ADC-IVU의 성능개선 작업에 대한 전반적인 사항과 진공작업 및 그 결과를 내용으로 한다.

• Korean Journal of Crystallography
• /
• v.14 no.1
• /
• pp.7-12
• /
• 2003

The compound SrA1₂(BO₃)₂O is a good host lattice for negative thermal expansion. We have measured thermal expansion over the limited temperature range by X-ray diffraction and ceramic dilatometry. In the aluminum borate compound, a thermal contraction is observed with a coefficient -1.64×10/sup -4/ Å/℃ on the c axis in the temperature range 23∼215℃ and with a maximum change -1.75㎛ in length of a ceramic bar of 20㎜ in the temperature range 110∼170℃, respectively.

• Journal of the Korean Ceramic Society
• /
• v.12 no.4
• /
• pp.37-42
• /
• 1975

철(II)이온을 안정화 하기위하여, 2산화 규소와, 구상, 입방체상 및 침상의 서로 다른형태의 산화 제2철로부터 규산철을 합성하였다. 메타놀증기로 포화시킨 질소까스를 튜브로에 도입시켜 얻은 환원성 분위기속에서, 114$0^{\circ}C$에서 11$65^{\circ}C$의 온도범위에서, 가스유속을 0.13 및 0.25l/min. 로서, 환원시간 4-150분동안 교상반응을 진행하였다. 반응생성의 동태를 오르자트 가스분석으로 검토하였으며, 생성물의 확인은 X-선 회절시험 및 감량정량에 의하였으며, 결과는 다음과 같다. 1 : 1.1의 몰비로 혼합한 산화제2철과 2산화 규소의 경우, 가스유속이 0.13l/min일 때, 규산철 합성반응시간은 구상, 입방체상 및 침상산화철에 있어서 각기 8-27분, 10-16분 및 6-7분으로 구상의 경우가 범위가 가장 넓었다. 또한, 반응속도는 산화제2철의 표면적의 평방근에 비례하였고 반응시간의 평방근에 역비례하였다.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.56-68
• /
• 1997

This work was intended to study the effect of a partial pressure ratio and a total pressure of reactive gases on the properties of TiC$_{x}$N$_{1-x}$ . coated layer. In this regard, various TiC$_{x}$N$_{1-x}$ coatings were synthesized with C2112 and N2 Mixture gas of different compositions by Arc Ion Plating process which has been highlighted for an industrial purpose. It was revealed from colors and X-ray diffraction patterns that the concentration of carbon of a TiC$_{x}$N$_{1-x}$ coating increases with a partial pressure ratio (PC$_{2}$H$_{2}$/PN$_{2}$) as well as a total pressure Of $C_{2}$H$_{2}$ and N$_{2}$ mixture gas. Accordingly, the hardness of TiC$_{x}$N$_{1-x}$ coated layer increased but the adhesion to the substrate of SKH 51 was degraded. On the other hand, the deposition rate was independent of a partial pressure ratio and a total pressure of mixture gas. It was found that a uniform gas distribution is critical for an industrial application since the composition of a coating depends strongly on the location of a substrate inside of the furnace. As a result of milling tests with different TiC$_{x}$N$_{1-x}$ coated end mills, the one which has a low carbon concentration was better than others studied in this work.d in this work.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.2
• /
• pp.213-219
• /
• 1996

Pellet type $Pt/MoO_{3}$ gas sensor which is operating at much lower temperature than conventional ceramic sensors such as $SnO_{2}$ or ZnO was fabricated. Morphology and crystal structure of $Pt/MoO_{3}$ according to calcination temperature have been characterized with Transmission Electron microscopy and X-Ray powder diffraction. The characterization indicates that as calcination temperature is increased, overlayers of $MoO_{3}$ on Pt are produced, but additionally, the Cl content associated with the Pt phase diminishes. The gas dasorption test showed that the change in surface morphology is closely related to hydrogen storage capacity of the sample. The gas sensitivities at $50^{\circ}C$ and $150^{\circ}C$ are very high.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.83-92
• /
• 2021

In this study, effective porosity measurement, electron microscope (SEM) observation, X-ray diffraction analysis (XRD), slaking, swelling, and unconfined compression strength according to water immersion were analyzed to evaluate the properties of mudstone with high porosity in Pohang. As a result of the test for 16 square samples (5 cm), the effective porosity was 14.67% on average, higher than porosity of general mudstone, and electron microscope observation confirmed that the porosity was actually high. As a result of X-ray diffraction analysis, the swelling clay mineral content was 2.3~4.1%, which was lower than the results of previous studies in Pohang. The slake durability index was 37.73~87.73%, showing low to medium durability, which was lower than the results of previous studies. It was confirmed that the swelling property rapidly expanded to 1.79~1.82% of maximum swelling strain in the major axis direction for 30 minutes. As the properties of decreasing the unconfined compression strength according to water immersion, the samples rapidly weathered after 10 minutes of water immersion, and the strength decreased. It was confirmed that the results of previous studies related to mudstone in Pohang were different. This is judged to be due to the high porosity of mudstone in study.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.352-352
• /
• 2004

산화물 형태의 사용후핵연료를 고온 용융염계에서 금속 형태로 전환하는 전기화학적 금속전환 공정 개발의 일환으로 $U_3O_8$ 분말로 충전된 다공성 마그네시아 용기 및 스테인레스강 고체전극으로 구성된 일체형 음극과 $SnO_2$ 재질의 양극을 사용하여 5kg $U_3O_8$/batch 규모의 mock-up 시험을 수행하였다. 백금 재질의 양극을 사용하였을 때 99% 이상의 금속전환율을 보인 동일한 전하량을 공급하고 실험을 중단한 결과 X-선 회절분석(XRD) 및 열중량 분석(TG)으로부터 스테인레스강 고체전극 부분에서는 거의 금속으로 전환되었으나 다공성 마그네시아 용기 부분에서는 비교적 금속전환율이 낮은 경향을 나타내었다.(중략)

• Tunnel and Underground Space
• /
• v.15 no.6 s.59
• /
• pp.411-424
• /
• 2005

Weathering is defined as a process by which surface rock, once formed in the deep ground, is broken down and altered to keep the equilibrium with the ambient environment. In this study granitic rock samples of different weathering grades were collected in the field and the microscopic observation, X-ray diffraction analysis, electron microscopic observation, chemical analysis, and rock property tests were carried out. Formation of secondary minerals, especially clay minerals, by weathering was identified and the mechanism for the change of engineering properties such as rock strength degradation was analyzed. Tunnel model test, Failure behaviour, Shallow tunnel, Unsupproted tunnel length.

• Fire Science and Engineering
• /
• v.28 no.5
• /
• pp.58-63
• /
• 2014

Fire-resistance paints are supposed to become intumescent and diminish heat transfer along the steel frames in case of a fire. If unsatisfactory fire-resistance paints which do not satisfy their standard specification are used, it may result in a severe disaster. Because satisfactory fire-resistance paints are hardly discriminated from the unsatisfactory ones by a simple visual inspection, more reliable and convenient onsite evaluation methods are necessary. Here we report the preliminary study result on the fire safety testing method for fire-resistance paints using an X-ray analysis method. It was found that the existence and quantity of effective constituents in fire-resistance paints can be detected by the X-ray analysis method. X-ray fluorescence (XRF) analyses showed that P and Cl elements are much more enriched in fire-resistance paints, compared to normal paints. X-ray diffraction (XRD) analyses showed that ammonium polyphosphate is present as the main crystalline material in fire-resistance paints, but absent in normal paints. The X-ray analysis method is expected to be used for the onsite inspection of fire-resistance paints with the upcoming availability of portable XRF and XRD instruments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.510-510
• /
• 2007

Titanate nanotube(TNT)는 높은 비표면적과 우수한 물리화학적 특성을 가지고 있어 광촉매, 수소 저장재료, 태양전지용 전극재료 등에 적용되고 있다. 또한, 티타네이트 나노튜브는 전자 이동이 원활한 구조적 특징을 가지고 있어 리듐 이차전지용 호스트 재료로서 많은 연구가 진행 중이다. 이에 본 연구에서는 저온균일침전법으로 제조한 루틸상 $TiO_2$ 분말에 Lithium chloride를 1~10wt%를 동시에 첨가한 후 10M의 sodium hydroxide 수용액 내에서 수열합성하여 리튬이 도핑된 티타네이트 나노튜브를 제조하였다. 제조된 분말의 입자형상 및 크기는 전자주사 현미경을 이용하여 관찰하였으며, X-선 회절분석을 이용하여 리튬 첨가에 따른 결정상 변화를 관찰하였다. 또한 리튬이 도핑된 티타네이트 나노튜브의 전기화학적 특성 평가를 위해 양극 활물질 : 도전제 : 바인더를 75 : 20 : 5의 비율로 혼합한 후 coin cell을 제조하였고, potentiostat를 이용하여 용량 측정 및 cycle 특성을 실시하였다. 수열 합성법에 의해 형성된 입자는 직경 10nm, 길이 수 ${\mu}m$로 관찰되었으며, X-선 회절 시험 결과 LiO와 같은 이차상은 발견되지 않았다. 측정된 coin cell의 용량은 240mAh/g을 나타내었으나, 싸이클 특성이 빠르게 저하됨을 확인할 수 있었다.