• Journal of the Korean Vacuum Society
• /
• v.19 no.5
• /
• pp.341-346
• /
• 2010

In this paper, anti-reflection coating was investigated for decreasing the reflection in visible range of 400~650 [nm] through four staked layers of $Si_xO_y$ and $Si_xN_y$ thin films prepared by reactive sputtering method. Si single crystal of 6 [inch] diameter was used as a sputtering target. Ar and $O_2$ gases were used as sputtering gases for reactive sputtering for the $Si_xO_y$ thin film, and Ar and $N_2$ gases were used for reactive sputtering for the $Si_xN_y$ thin film. DC pulse power of 1900 [W] was used for the reactive sputtering. Refractive index and deposition rate were 1.50 and 2.3 [nm/sec] for the $Si_xO_y$, and 1.94 and 1.8 [nm/sec] for the $Si_xN_y$ thin film, respectively. Considering the simulation of the four layer anti-reflection coating structure with the above mentioned films, the $Si_xO_y-Si_xN_y$ stacked four-layer structure was prepared. The reflection measurement result for that structure showed that a "W" shaped anti-reflection was obtained successfully with a reflection of 1.7 [%] at 550 [nm] region and a reflection of 1 [%] at 400~650 [nm] range.

• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.108-119
• /
• 2014

In this paper, through the example of international lunar exploration mission the equipment was to investigate, and the amount of data transferred per day were identified. Data storage and the data transfer rate (8.4Mbps less) for the satisfaction of the value within the range of available S and X bands was confirmed by using the communication link budget. The result is to define the range of the sensor information can be obtained, as well as from the values of the parameters calculated for the transmission communication systems will be able to define the specifications.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.3
• /
• pp.26-35
• /
• 1980

The degradation of image due to the finite size of sensing devices has been one of the problems in all digital imaging systems. The basic study on the improvement of the spatial resolution was carried out in both spatial and frequency domains by the resolution recovery techniques which have been used in optics. Here, the techniques were applied to CT (Computerized Tomography) system, and image with finer resolution was obtained by these techniques. The basic theory is described and the results of the simulation are shown.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.42-49
• /
• 2011

Telemetry link requires high data rate to transmit the multimedia data for lunar explorations in space communications. In this paper, we analyze a data rate with the modulation and channel coding schemes based on Consultative Committee for Space Data Systems (CCSDS) in S, X, Ku and Ka bands, respectively. Then, we suggests modulation and channel coding schemes to meet the link margins and have a maximum data rate for lunar explorations in telemetry links.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.23-27
• /
• 2004

Developing of electromagnetic wave absorbers for GHz frequency, we used cast Alnico magnets. It is the first research paper to show that electromagnetic wave absorbers with Alnico magnets have good reflectivity in the GHz frequencies. Especially in this study, we used recycled cast Alnico magnets for natural resources problems and natural environment problems. New electromagnetic wave absorbers developed in this study are useful for X-band and C-band.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.767-770
• /
• 2000

저 대역 망에서 동영상을 실시간으로 전송하기 위해서는 높은 압축률을 요구한다. 따라서 복원된 이미지는 화질 저하라는 현상을 낳게 되는데 본 논문에서는 복원 이미지의 화질 보상에 대한 방법으로 디코더에서 블록 아티팩을 제거하고 복원 이미지를 선명하게 하는 알고리즘을 제안한다. 여기서 화질 보상은 원본 이미지와 동일하게 만드는 것이 아니라 인간이 더 좋은 영상으로 인식하도록 하는 걸 목적으로 한다.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.2
• /
• pp.105-114
• /
• 2000

In this Paper in order to break with real-time position of signal source which have first dimension motion, the N antenna is arrayed with half-circle, the incident angle of signal source from receiving power pattern to receive at receive antenna is estimated and measured, and the system that measure horizontal moving distance of signal source is designed. Signal source is constructed by 10-20dBm transmitter power which frequency is 10.52GHz of X band, and on horizontally moving the position of signal source. validity of new method is confirmed.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.2
• /
• pp.1-12
• /
• 1970

In this paper, theoretical and experimental study about the light modulation at X-band(9375MHz) micro wave, using the linear electro-optic effect, has been described. The electro-optic crystal, KDP (potassium dihydrogen phosphate)is used for modulator crystals which is composed resonated modulator. Output performances of modulated wave through movable short positions are presented. It was critically respond from 2. And the output modulated intensity was compared with theoretical curve. Consequently, in spite of many problems remain yet, most promissing and more sucessful modulator configurations are compleely given.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.64-71
• /
• 2004

The object of this study is to design the Radar Absorbing Structures (RAS) having sandwich structures in the X-band ($8.2{\sim}12.4GHz$) frequencies. Glass fabric/epoxy composites containing conductive carbon blacks and carbon fabric/epoxy composites were used for the face sheets. Polyurethane(PU) foams containing multi-walled carbon nanotube (MWNT) were used for the core. Their permittivities in the X-band were measured using the transmission line technique. The reflection loss characteristics for multi-layered sandwich structures were calculated using the theory of transmission and reflection in a multi-layered medium. Three kinds of specimens were fabricated and their reflection losses in the X-band were measured using the free space technique. Experimental results were in good agreements with simulated ones in 10dB absorbing bandwidth.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.33-39
• /
• 2013

In this paper, X/Ku band waveguide diplexers with H-plane T-junction for satellite communication systems is proposed and its characteristics is cinfirmed. Two frequency bands such as X(7.25 ~ 8.4 GHz) and Ku(12.25 ~ 14.5 GHz) can be separated by the proposed waveguide diplexers. A diplexers is normally including low pass filter, high pass filter and junction waveguide. To simplify the structure of the proposed diplexers, the proposed waveguide diplexers is using impedance matching technique on H-plane of the high pass filter without low pass filter. To use vertical and horizontal polarization, the proposed diplexers with orthomode transducer(OMT) characteristics is also designed. Therefore, it is confirmed that the proposed waveguide diplexers can be used as dual-band and dual-polarization diplexers for satellite communication feed systems.