• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.690-693
• /
• 2003

Soft x-ray microscopy provides a unique set of capabilities in-between those of visible light and electron microscopy. It has long been recognized that nature provides a 'water window' spectral region between the K shell x-ray absorption edges of carbon (~290eV) and oxygen (~540eV), where organic materials show strong absorption and phase contrast, while water is relatively non-absorbing. This enables imaging of hydrated biological specimens that are several microns thick with high intrinsic contrast using x-rays with a wavelength of 2.3~4.4nm. Soft X-ray microscopy is therefore well suited to the study of specimens like single biological cells. The most direct advantage of X-ray microscope is their high spatial resolution when compared with visible light microscopes, combined with an ability to image hydrated specimens that are several microns with a minimum of preparation. Our study describes the conceptual design of soft x-ray microscope system based on a laser-based source for biomedical application with high resolution ($\leq$50nm) and short exposure time ($\leq$30sec).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.5
• /
• pp.559-565
• /
• 1988

A new valley operator is presented for extracting sketch features which contain valleys and edges subject to local intensities. It is a very simple operator using the local probablities in a 3x3 local window. Experimental results show its excellent performance over the existing valley or edge operators.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1073-1076
• /
• 1998

This paper describes implementation of a highlevel graphic design entry tool operating on X Window system The proposed design entry tool includes visual schematic entry, hierarchical modeling ability and VHDL source code generation. Experimental results show the efficiency of the proposed design system

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 1999.11a
• /
• pp.262-263
• /
• 1999

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.264-265
• /
• 2005

In this paper the conceptual design and development of a compact vertical type soft x-ray microscope is described. This x-ray microscope operates in the water window wavelength region(2.3 ${\sim}$ 4.4nm), where natural contrast between carbon(protein) and oxygen(water) allows imaging of unstained biological material their natural, hydrated environment. Until now, operational x-ray microscopes are based on synchrotron radiation sources, which limit their accessibility. Many biologists would benefit from having the x-ray microscope as a tool among other tools in their own laboratory, For this purpose we introduced the compact vertical type soft X-ray microscope with 50 nm resolution for biomedical application. The compact vertical type soft x-ray microscope is based on a laser plasma x-ray source, doubled ellipsoidal condenser reflective optics, diffractive zone plate optics and MCP coupled with CCD to record an x-ray image.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.47-52
• /
• 2002

A processing method is developed for preparing sol-gel derived $Pb(Zr_{1-x}Ti_x)O_3$ (x=0.5) thin films on Pt-Ir($Pt_{80}Ir_{20}$)-alloy substrates. The as-deposited layer was dried on a plate in air at $70^{\circ}C$. And then it was baked at $1500^{\circ}C$, annealed at $450^{\circ}C$ and finally annealed for crystallization at various temperatures ranging from $580^{\circ}C$ to $700^{\circ}C$ for 1hour in a tube furnace. The thickness of the annealed film with three layers was $0.3{\mu}m$. Crystalline properties and surface morphology were examined using X-ray diffractometer (XRD). Electrical properties of the films such as dielectric constant, C-V, leakage current density were measured under different annealing temperature. The PZT thin film which was crystallized at $600^{\circ}C$ for 60minutes showed the best structural and electrical dielectric constant is 577. C-V measurement show that $700^{\circ}C$ sample has window memory volt of 2.5V and good capacitance for bias volts. Leakage current density of every sample show $10^{-8}A/cm^2$ r below and breakdown voltage(Vb) is that 25volts.

• Journal of Radiation Protection and Research
• /
• v.43 no.4
• /
• pp.137-142
• /
• 2018

Background: Gamma-ray detectors having a thin window of a material with low atomic number can increase the true coincidence summing effects for radionuclides emitting X-rays or gamma-rays. This effect can make efficiency calibration or spectrum analysis more complicated. In this study, a Cu shield was tested as an X-ray filter to neglect the true coincidence summing effect by X-rays and gamma-rays in gamma-ray spectrometry, in order to simplify gamma-ray energy spectrum analysis. Materials and Methods: A Cu shield was designed and applied to an n-type high-purity germanium detector having an $X-{\gamma}$ summing effect during efficiency calibration. This was tested using a commercial, certified mixed gamma-ray source. The feasibility of a Cu shield was evaluated by comparing efficiency calibration results with and without the shield. Results and Discussion: In this study, the thickness of a Cu shield needed to avoid true coincidence summing effects due to $X-{\gamma}$ was tested and determined to be 1 mm, considering the detection efficiency desired for higher energy. As a result, the accuracy of the detection efficiency calibration was improved by more than 13% by reducing $X-{\gamma}$ summing. Conclusion: The $X-{\gamma}$ summing effect should be considered, along with ${\gamma}-{\gamma}$ summing, when a detection efficiency calibration is implemented and appropriate shielding material can be useful for simplifying analysis of the gamma-ray energy spectra.

• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.296-307
• /
• 1994

Using X-Window system (Motif Graphic User Interface), the AKM (Apogee Kick Motor) firing software for Koreasat which will be launched in 1995 has been developed to transfer the spacecraft from its transfer orbit, provided by the DeltaII launch vehicle, into a nearly geostationary drift orbit. The AKM firing software runs in one of two modes. In mission analysis mode, using a fixed magnitude impulsive velocity change, it provides the necessary data for planning the burn parameters. In insert mode, it uses the orbit propagator function to integrate the spacecraft state through the AKM burn. In this case, an AKM thrust profile and specific impulse are applied to the necessary data for planning the burn parameters to obtain the best possible drift orbit. The apogee burn planning simulation for orbital transfer of Koreasat has been performed using the AKM firing software. And the result of this simulation has been analyzed.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.384-394
• /
• 1997

Research about Reuse is developed in various direstions, but the sucessful exmples; of the rexuavle objects are very rare in praciice because technical environment to support reuse is short.In this paper we describe a sys-tem for analyxing the information about reusability of C++ objects and for storing and managing the extracted information in information DB.In this development system, user can see the specification information of objects and the quality information of the procedual and object oriented atibutes by browsing.And objests that are not on the reuse unformation DB is analyxed and is tested automatically using the information analyzer by user.We implemented this system using C program in X-Window OSFI/Motif 2.1.1.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.60-67
• /
• 2017

A baggage handling system (BHS) in airport is an unified system for moving the passengers' baggage in designated time. Input baggage from the check-in counter travels to the baggage claim area or cargo handling terminal through this system. In particular, entryway BHS consists of conveyors, X-ray and sorters such as tilt-tray to send the baggage to departing airplane and it could have various problems for handling certain amount of baggage in restricted time such as baggage jamming at certain merge point. This causes systemic error such as delay of the time, omissions of the baggage and even breakdown of the equipment and inefficiency. Also the increasing maximum time of the baggage passing through the BHS could delay the flight schedule and finally decrease the service level. Thus, the algorithm for controlling the flow of the merge is essential to the system. The window reservation algorithm is the one of the most frequently used methods to control the merge configuration. Above all, the reserve location, so called reserve ahead point, that allocates the window is important for the performance of the algorithm. We propose the modified window reservation algorithm and the best reserve locations by changing the reserve ahead point in the induction conveyors. The effect of various reserve ahead points such as the capacity and utility of the system were analyzed and the most effective reserve ahead point combination was found. The total baggage processing time and the utilization of the tilt-tray are properly considered when choosing the optimal Reserve ahead point combination. In the layout of this study, the configuration of four conveyors merged into one tilt-tray is studied and simulation analysis is done by AutoMod(R), 3D simulation software. Through the simulation, the window reservation algorithm is effectively operated with the best combination of reserve ahead point which reduces the maximum baggage travel time.