• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.617-621
• /
• 2014

An efficient and selective method for the synthesis of ethyl 2-amino/aryloxy-3-aryl-4-oxo-5-phenyl-4,5-dihydro-3H-pyrrolo[3,2-d]pyrimidine-7-carboxylate derivatives has been developed. The main process involved the reaction of diethyl 1-phenyl-3-((triphenylphosphoranylidene)amino)-1H-pyrrole-2,4-dicarboxylate and aromatic isocyanates, followed by addition of amines/phenols in the presence of catalytic amount of sodium ethoxide or solid potassium carbonate.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.366-366
• /
• 2010

Single crystalline Fe/NiO bilayers were epitaxially grown on Ag(001) and on MgO(001), and investigated by Low Energy Electron Diffraction (LEED), Magneto-Optic Kerr Effect (MOKE), and X-ray Magnetic Linear Dichorism (XMLD). We find that while the Fe film has an in-plane magnetization in both Fe/NiO/Ag(001) and Fe/NiO/MgO(001) systems, the NiO spins switch from out-of-plane direction in Fe/NiO/MgO(001) to in-plane direction in Fe/NiO/Ag(001). These two different NiO spin orientations generate remarkable different effects that the NiO induced magnetic anisotropy in the Fe film is much greater in Fe/NiO/Ag(001) than in Fe/NiO/MgO(001). XMLD measurement shows that the much greater magnetic anisotropy in Fe/NiO/Ag(001) is due to a 90o-coupling between the in-plane NiO spins and the in-plane Fe spins which causes a switching of the NiO spins during the Fe magnetization reversal.

• Steel and Composite Structures
• /
• 제44권3호
• /
• pp.407-421
• /
• 2022

Prefabricated hybrid wind turbine towers (WTTs) are promising due to height increase. This study proposes the use of ultra-high performance concrete (UHPC) to develop a new type of WTT without the need to use reinforcement. It is demonstrated that the UHPC WTT structure without reinforcing bars could achieve performance similar to that of reinforced concrete WTTs. To simplify the design of WTT, a design approach for the calculation of stresses at the horizontal joints of a WTT is proposed. The stress distribution near the region of the horizontal joint of the WTT structure under normal operating conditions and different load actions is studied using the proposed approach, which is validated by the finite element method. A further parametric study shows that the degree of prestressing and the bending moment both significantly affect the principal stress. The shear-to-torsion ratio also shows a significant influence on the principal tensile stress.

• Computers and Concrete
• /
• 제29권2호
• /
• pp.69-79
• /
• 2022

For long underground box utility tunnels, post-tensioned precast concrete is often used. Between precast tunnel segments, sealed waterproof flexible joints are often specified. Fault displacement can lead to excessive deformation of the joints, which can lead to reduction in waterproofing due to diminished contact pressure between the sealant strip and the tunnel segment. This paper authenticates utilization of a finite element model for a prefabricated tunnel fault-crossing founded on ABAQUS software. In addition, material parameter selection, contact setting and boundary condition are reviewed. Analyzed under normal fault action are: the influence of fault displacement; buried depth; soil friction coefficient, and angle of crossing at the fault plane. In addition, distribution characteristics of the utility tunnel structure for vertical and longitudinal/horizontal relative displacement at segmented interface for the top and bottom slab are analyzed. It is found that the effect of increase in fault displacement on the splice joint deformation is significant, whereas the effects of changes in burial depth, pipe-soil friction coefficient and fault-crossing angle on the overall tunnel and joint deformations were not so significant.

• Advances in concrete construction
• /
• 제13권 2호
• /
• pp.153-162
• /
• 2022

Prefabricated exterior wall panel is the main non-load-bearing component of assembly building, which affects the comprehensive performance of thermal insulation and durability of the building. It is of great significance to develop new prefabricated exterior wall panel with durable and lightweight characteristics for the development of energy-saving and assembly building. In the prefabricated sandwich insulation hanging wall panel, the selection of material for the outer layer and the arrangement of the connector of the inner and outer wall layers affect the mechanical performance and durability of the wall panels. In this paper, high performance cement-based composites (HPFRC) are used in the outer layer of the new type wall panel. FRP bars are used as the interface connector. Through experiments and analysis, the influence of the arrangement of connectors on the mechanical behaviors of thin-walled composite wall panel and the panel with window openings under two working conditions are investigated. The failure modes and the role of connectors of thin-walled composite wallboard are analyzed. The influence of the thickness of the wall layer and their combination on the strain growth of the control section, the initial crack resistance, the ultimate bearing capacity and the deformation of the wall panels are analyzed. The research work provides a technical reference for the engineering design of the light-weight thin-walled and durable composite sandwich wall panel.

• Advances in Computational Design
• /
• 제7권4호
• /
• pp.281-295
• /
• 2022

Tensile property is one of the excellent properties of ultra-high performance concrete (UHPC), and uniaxial tensile test is an important and challenging mechanical performance test of UHPC. Traditional uniaxial tensile tests of concrete materials have inherent defects such as initial eccentricity, which often lead to cracks and failure in non-test zone, and affect the testing accuracy of tensile properties of materials. In this paper, an original integrated design scheme of mould and end fixture is proposed, which achieves seamless matching between the tension end of specimen and the test fixture, and minimizes the cumulative eccentricity caused by the difference in the matching between the tension end of specimen and the local stress concentration at the end. The stress analysis and optimization design are carried out by finite element method. The curve transition in the end of specimen is preferred compared to straight line transition. The rationality of the new integrated design is verified by uniaxial tensile test of strain hardening UHPC, in which the whole stress-strain curve was measured, including the elastic behavior before cracking,strain hardening behavior after cracking and strain softening behavior.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권14호
• /
• pp.5551-5556
• /
• 2014

Background: The prognostic value of human epidermal growth factor receptor-2 (HER-2/neu) for survival of patients with colorectal cancer (CRC) is still ambiguous. We therefore performed a meta-analysis to evaluate its prognostic significance. Materials and Methods: We searched the MEDLINE and EMBASE databases for published literature investigating associations between HER-2/neu status and overall survival of patients with CRC. A meta-analysis was performed using a DerSimonian-Laird model and publication bias was investigated by Begg's and Egger's tests. Subgroup analysis was also conducted according to the study design type, study quality score, cut-off value for HER-2/neu overexpression, publication region, patient number and publication year. Results: A total of 17 eligible studies involving 2,347 patients were identified for this meta-analysis. The combined hazard ratio (HR) was 1.31 (95% confidence interval (CI): 0.96-1.79), suggesting that HER-2/neu overexpression was not significantly associated with overall survival of patients with CRC. However, subgroup analysis revealed that HER-2/neu overexpression had an unfavorable impact on survival when the analysis was restricted to subgroups of study quality score ${\leq}5 $(HR=1.56, 95%CI: 1.17-2.10), Asian patients (HR=1.74, 95%CI: 1.22-2.49), patient number ${\leq}106$ (HR=1.57, 95%CI: 1.01-2.44), publication year before 2003 (HR=1.59, 95%CI: 1.02-2.49), and prospectively designed study (HR=3.62, 95%CI: 1.42-9.24). The effect disappeared in subgroups of study quality scores > 5 (HR=0.69, 95%CI: 0.33-1.44), non Asian patients (HR=1.14, 95%CI: 0.77-1.70), patients' number > 106 (HR=1.07, 95%CI: 0.67-1.72), publication year after 2003 (HR=1.13, 95%CI: 0.76-1.69), and retrospectively designed study (HR=1.22, 95%CI: 0.89-1.67). Conclusions: Our meta-analysis suggests that HER-2/neu overexpression might not be a significantly prognostic indicator for patients with CRC. Further studies are required to confirm these results.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권4호
• /
• pp.2525-2528
• /
• 2013

The Homer protein family, also known as the family of cytoplasmic scaffolding proteins, which include three subtypes (Homer1, Homer2, Homer3). Homer3 can regulate transcription and play a very important role in the differentiation and development for some tissues (e.g. muscle and nervous systems). The current studies showed that Homer3 abnormal expression changes in acute myeloid leukemia (AML). Forced expression of Homer3 in transfected K562 cells inhibited proliferation, influenced the cell cycle profile, affected apoptosis induced by $As_2O_3$ through inhibition of Bcl2 expression, and also promoted cell differentiation induced by 12-O-tetra decanoylphorbol-acetate (TPA). These results showed that Homer3 is a novel gene which plays a certain role in the occurrence and development of AML.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권11호
• /
• pp.5557-5562
• /
• 2012

Aim: The aim of this study was to investigate the frequency and correlation between auto-antibodies to survivin and MUC1 variable number tandem repeats (VNTR) in colorectal cancer (CRC), which can provide valuable information for the design of immunotherapeutic vaccines for this disease. Methods: Enzyme-linked immunosorbent assays (ELISA) were used to examine the level of auto-antibodies against survivin and MUC1 VNTR in the serum of 135 CRC patients and 95 healthy volunteers. Results: Using mean absorbance + 2 standard deviations (SD) of the healthy samples as a cut-off value, the positive rates of survivin and MUC1 VNTR auto-antibodies in CRC were 31.1% and 18.5%, respectively. Altogether, the survivin and MUC1 VNTR positive samples accounted for 36.3% of the CRC patients, and 7.4% were positive for both. Conclusion: A significant positive correlation was found between levels of specific antibodies against survivin and MUC1 VNTR in the serum of CRC patients (r = 0.3652, P < 0.0001), suggesting that vaccines against both targets would elicit immune responses more effectively.

• Parasites, Hosts and Diseases
• /
• 제55권1호
• /
• pp.15-20
• /
• 2017

The aim of this study was to identify antigens for a vaccine or drug target to control rabbit coccidiosis. A combination of 2-dimensional electrophoresis, immunoblotting, and mass spectrometric analysis were used to identify novel antigens from the sporozoites of Eimeria stiedae. Protein spots were recognized by the sera of New Zealand rabbits infected artificially with E. stiedae. The proteins were characterized by matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF/TOF-MS) analysis in combination with bioinformatics. Approximately 868 protein spots were detected by silver-staining, and a total of 41 immunoreactive protein spots were recognized by anti-E. stiedae sera. Finally, 23 protein spots were successfully identified. The proteins such as heat shock protein 70 and aspartyl protease may have potential as immunodiagnostic or vaccine antigens. The immunoreactive proteins were found to possess a wide range of biological functions. This study is the first to report the proteins recognized by sera of infected rabbits with E. stiedae, which might be helpful in identifying potential targets for vaccine development to control rabbit coccidiosis.