• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.7-14
• /
• 2011

연질 동관은 조선, 자동차, 플랜드, 냉동공조 기기 등에 많이 사용되는 대표적인 파이프 재료 중의 하나이다. 그러나 이러한 재료들은 벤딩가공시 외부의 주름, 스프링백, 관이 얇아지는 현상들이 자주 발생하여 문제가 된다. 본 논문에서는 연성재질을 벤딩시 맨드럴이 슬라이딩 가이드 레일을 따라서 파이프를 누르는 벤딩방식을 선택한 연성재질 전용 벤딩머시인을 제작하여 이와 같은 현상을 줄였다. 이의 성능을 확인하는 과정에서 재료로 사용한 동관의 직경이 작을수록 스프링백 현상은 증가하였고 또한 굽힘각도가 클수록 컸다. 또한 동관의 벤딩시 주름이 거의 발생하지 않는 성형품을 제작할 수 있었다.

• 펄프종이기술
• /
• 제39권4호
• /
• pp.21-28
• /
• 2007

A simple method of on-line stiffness measurement using the wrinkling behavior of paper web between two rollers was presented. The theory and the equation were presented, and lab and mill tests were executed. We called the stiffness measured by Taber tester as 'Taber stiffness', and by tension wrinkling measurement as 'wrinkle stiffness', respectively. Lab experimental results showed Taber and wrinkle stiffness are almost equivalent. In the mill experiment, we could measure the stiffness in the wet state and in the dry state. The dry wrinkle stiffness was close to the taber stiffness, but the wet wrinkle stiffness was much lower than the corresponding taber stiffness.

• 펄프종이기술
• /
• 제38권1호통권113호
• /
• pp.21-26
• /
• 2006

A simple method of on-line stiffness measurement using the wrinkling behavior of paper web between rollers was developed. The theory and calculating equation were presented, and the theoretical maximum error associated with the equation was also presented. We called the stiffness measured by Taber tester as 'Taber stiffness', and by wrinkling behavior as 'wrinkle stiffness', respectively, for comparison. By using this method, on-line complete control of paper stiffness will be possible in near future. Special care about shear wrinkle and paper dimensional effects were addressed.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.235-250
• /
• 2007

A simple method of on-line stiffness measurement using the wrinkling behavior of paper web between rollers was presented. The theory and calculating equation were presented, and lab experiment was executed. We called the stiffness measured by Taber tester as 'Taber stiffness', and by tension wrinkling measurement as 'wrinkle stiffness', respectively, for comparison. Lab experimental results showed Taber and wrinkle stiffness are almost equivalent. We expect this method will work porperly for the on-line measurement of paper stiffness in near future.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.66-71
• /
• 2013

산업현장에서 널리 사용되고 있는 연질용 벤딩파이프는 벤딩 후 외관의 주름이나 스프링 백, 관이 얇아지는 현상 등이 자주 발생하여 크랙이나 파이프 파공 등의 문제가 대두되고 있지만 이를 완벽히 해결할 수 있는 벤딩기계는 아직 전무한 실정이다. 따라서 본 연구에서는 고품질 정밀형 연질재료 전용 벤딩기계의 개발을 위한 기초연구로서 벤딩툴인 맨드릴을 자체 설계제작하고 그 성능을 검증한다. 또한 벤딩 시 관이 얇아지는 현상에 대해 두께 감소율과 손상정도 등을 시뮬레이션으로 분석하고 그 해결방법을 제시하고자 한다.

• 박물관보존과학
• /
• 제25권
• /
• pp.27-34
• /
• 2021

국립중앙박물관 고려나전향상(高麗螺鈿香箱)은 당대의 제작기법과 미학적 표현을 종합적으로 보여주는 대표 문화재이다. 본 연구에서는 원형복원에 필요한 백골 제작에 사용된 수종 및 목공기술과 나전의 해부학적 특징을 조사하였다. 조사 결과 고려나전향상은 삼나무로 만들었으며 이는 일본과 교역관계를 짐작할 수 있으며 뚜껑 하단에 있는 띠 부분 부착하기 위하여 모서리 부분에 "주름꺾기법"을 사용한 것과 상판과 측판의 결합을 위하여 나무못을 사용한 것은 얇은 판재를 효율적으로 사용하기 위한 것으로 판단된다. 그리고 사용된 나전의 해부학적 특징을 조사한 결과 얇은 판상의 적층구조가 확인되었다. 이러한 특징은 일부 패각류에서 관찰되며 정확한 패각의 식별을 위한 연구가 필요하다.

• 소성∙가공
• /
• 제9권6호
• /
• pp.574-581
• /
• 2000

A vertically-walled auto-body part is one of the most difficult stamping parts because of angle change, wall curl, and twisting of the blank after springback as well as fracture and wrinkle. In this study, computational simulations of the vertically-walled auto-body part are carried out focusing on angle change, wall curl, and twisting after springback. Binderwrap blank shape is used in forming analysis for precise initial contacts between punch and blank. An adaptive mesh method is used in springback analysis for precise calculation of bending moments. In springback analysis, the differences of 2 and 3 dimensional analysis are compared and the effects of blank holdig force and friction coefficient are evaluated. In order to verify the validity of simulation results, they are compared with measured ones. The predicted thickness distribution and formed shape are agreed well with those of the measurement. The Predicted springback amount is less than that of the measurement.

• 한국염색가공학회지
• /
• 제16권3호
• /
• pp.22-30
• /
• 2004

The polyester fabrics were treated with the chitosan with various solubility in optimized treatment condition. The treatment method was discussed to be a high functional finishing for the polyester fabric to obtain the high moisture absorption and anti-microorganism property by evaluating the effect of the chitosan purification method on the yield and anti-microorganism property of the chitosan. On the other hand, soluble polyurethane was added to the chitosan treatment solution and/or plasma pretreatment was done. The addition of soluble polyurethane give a high add-on ratio as well as a linen like effect of treated polyester fabric. The results were as follows: 1. In the treatment of polyester fabric by the chitosan solution, a soluble PU resin and low temperature plasma treatment were done to obtain high binding force between the fabrics and the chitosan. The add-on rate and the moisture absorption ratio of the fabrics treated with the chitosan-PU after treated with the plasma slightly increased more than those of the fabrics treated with the chitosan only. 2. Anti-static property of the fabrics treated with the chitosan decreased rapidly with increasing of the chitosan concentration. The washing fastness of the fabrics treated with the chitosan-PU after treated with the plasma was better than those of the fabrics treated with chitosan only. The wrinkle resistance of the treated fabrics decreased constantly with the concentration of the chitosan. The bending rigidity of the treated fabrics increased greatly. On the treatment of polyester fabric under optimum condition, the microorganism reduction rate kept above 90％ after 10times launderings. 3. As the polyester fabrics which has flat yam was used as a weft yams were treated with the chitosan-PU as give a functional finishing effects such as durability, moisture absorption, anti-static and anti- microorganism property. Treated polyester fabric showed a good functional finishing effect and a linen like property.