The purpose of this study was to extract of Sub-elements of technological communication skills and to construct of a system model. In order to achieve the goal of the study, it was carried out in two steps: (1)Extraction sub-elements and definitions of technological communication skills, (2)Development of a system model of technological communication skills. Obtained conclusions by the process of this research were as follows. First, sub-elements of the technological communication skills were extracted and they were images, sketches, flowcharts, drawings, prototyping, symbols tables graphs and presentations. Second, using the 'technological communication tools' based on the "collaborative activities in online and offline', technological communication skills were defined as communication skills to be raised through the process of 'Idea through the Communication', 'Realization through the Communication', 'Wrap up through the Communication'. Third, technological communication skills were described as the system, in which 'Idea through the Communication(images, sketches, flowcharts)', 'Realization through the Communication(design, prototyping)', 'Wrap up through the Communication(symbol table graph, presentation)' were collaboratively activated. Fourth, checking tool for the technological communication skills was developed, based on checking tool for the existing communication skills and system model for technological communication skills. And it was improved by the expert validity test.
Previous researches showed that confined concrete with Fiber-Reinforced Plastic (FRP) sheets significantly improves the strength and ductility of concrete compared with unconfined concrete. However, the retrofit design of concrete with FRP materials requires an accurate estimate of the performance enhancement due to the confinement mechanism. The object of this research is to predict the compressive strength and strain of concrete confined with FRP wraps. For the purpose of this research, 102 test specimens were fabricated and loaded statically under uniaxial compression. Axial load, axial and lateral strains were investigated to predict the ultimate stress and strain. Also, to achieve reliability of proposed strength and strain models for FRP-confined concrete, another series of uniaxial compression test results were used. This paper presents strength and strain models for FRP-confined concrete. The proposed models to estimate the ultimate stresses and failure strains produce satisfactory predictions as compared to current design equations. In conclusion, it is proposed that the modified stress-strain model of concrete cylinders could be effectively used for the repair and retrofit of concrete columns.
Journal of the Korea Fashion and Costume Design Association
/
v.6
no.3
/
pp.169-183
/
2004
This study attempts to understand women's underwear culture in the Later Chosun Dynasty, by investigating the kinds and constructions of them, which formed bulky and puffed silhouette of the lower half of the body. In the middle 17th century in Chosun, Confucianism settled down as fundamental idea of society, while whole country achieved considerable economic growth. As a result for upperclass women, female virtues was demanded more than any other period in Chosun. On the other hand, lower-class women including Kisaengs, had more freedom on their clothing behaviors. According to the literature on women's dress institutions and restrictions of the extravagance, the use of kinds of high-quality silk and false hair was criticized, compared to women's clothes in China. From this, one can see the luxury and affluence of women's clothes at that time, which also reflected in luxurious underclothes. Also, the movement of class, by economic development, led to changes in the costumes of middle-to-lower class women, relaxing restrictions on clothes. Underclothes included Bosomband(가슴띠; long sashes for bosom to wrap), Sokjucksam(속적삼), and Sokchogori(속저고리; Korean blouse, worn under the chogori) for upper garment, and Darisokkok(다리속곳; basic underwear like the panty), Soksokkot(속속곳; underwear paji to be wide of hem), Sokpaji(속바지;trouser front and back opening), Tansokkok(단속곳; large size underwear like Soksokkot), Noronpaji(너른바지; paji like the skirt or paji bulky than tansokkot,), Mujigi무지기; tiered skirt for underwear), and Daeshumchi'ma(대슘치마; Korean underskirt, shape hem as a pad into form) for lower clothes.
The results of the image evaluations by various shapes of skirts which are typical female's lower garment were as follows; 1. The composition factors of images by the shapes of skirts were classified into five factors. The 1st factor is lovely image factor, the 2nd is attractive image factor, the 3rd is practical image factor, the 4th is slim-looking image factor and the 5th is long-looking image factor. 2. In the 1st factor- lovely image factor, tiered skirt, $360^{\circ}$ flared skirt and $180^{\circ}$ flared skirt were evaluated to express lovely images. In the 2nd factor- attractive image factor, $180^{\circ}$ flared skirt was evaluated to express refine and attractive images. In the 3rd factor- practical image factor, $360^{\circ}$ flared skirt and gathered skirt were evaluated to express easy and practical images. In the 4th factor- slim looking image factor, males evaluated 8gored skirt and females evaluated gathered skirt to express fat images. In the 5th factor- long looking image, $180^{\circ}$ flared skirt was evaluated to express long looking images by both sexes. 3. In the lovely image factor, gathered skirt was evaluated most differently between the sexes. Both in the attractive and practical image factor, tiered skirt was evaluated most differently between the sexes. 4. In the preference of male and female university students according to the shapes of skirts, both the sexes prefered flared skirt. But the low prefered shapes of skirts were differently evaluated between the sexes; the male students' was A-lined skirt and the female's was pleated skirt and wrap skirt.
Kim, S.C.;Lee, K.W.;Hong, T.S.;Kim, M.C.;Jung, M.K.;Song, Y.J.
Korean Journal of Computational Design and Engineering
/
v.11
no.4
/
pp.289-302
/
2006
It is becoming a common trend that many designers work on a very complex assembly together in a collaborative environment. In this environment, every designer should be able to see the whole assembly in a full detail or in a rough shape at least. Even though the hardware technology is being improved very rapidly, it is very difficult to display a very complex assembly at a speed to allow smooth interactions for designers. This problem could be solved if a designer could manipulate his portion of the assembly in a full resolution while the remaining portion of the assembly is displayed in a rough resolution. It is also desired that the remaining portion is converted to the full resolution when needed. To realize this environment, the capabilities to simplify the portions of an assembly and to reset to the original resolution should be added to the current CAD systems. Thus operators realizing multi-resolution on B-rep are proposed in this paper. They are: wrap-around, smooth-out, and thinning operator. Through appropriately applying these operators sequentially, an assembly model of any desired resolution can be easily generated. Of course, the assembly can go back to the finer resolution. In this paper, the data structures and the processes to realize these operators are described and a prototype modeling system with these operators is also demonstrated.
Journal of the Korean Society of Food Science and Nutrition
/
v.41
no.3
/
pp.418-429
/
2012
In this study we surveyed the packaging preferences of consumers for Korean rice cakes as current commercial products in Korea. The questionnaire was developed from a preliminary investigation of typical rice cake packaging patterns and sent to 2332 residents in Korea by random sampling mail. The questionnaire contained questions on the preferences of interior design in packaging, opening methods, individually separated types, printing position, packaging methods, and packaging materials such as paper and plastic. There were responses from 304 residents. The collected data was analyzed by an SPSS package program. Most of the packaging used for Korean rice cakes was plastic (58.9%) which was used for packaging materials and stretch wrap (42.9%) as packing methods. The results showed the preference was the perforated line type used by hand for opening a packaging and interior packaging design with 2~3 partitions. Most respondents expressed an interest in using individual packaging and having printing directly on the packaging. Also, the respondents preferred the packaging design that let them see the contents of a package. Based on the results of the questionnaire, this paper suggested that most consumers would prefer to choose a packaging system with a partition design in a plastic container, individually separated products, and a transparent container for Korean rice cakes. The results of packaging preferences could provide important information for suitable packaging development for Korean rice cakes. Further research should be conducted to improve the shelf life of Korean rice cakes with functional packaging systems such as modified atmosphere packaging or anti-microbial packaging.
Journal of the Korean Society of Clothing and Textiles
/
v.34
no.1
/
pp.50-66
/
2010
This Shanghai region study is a sample survey of female college students in their early 20s. This study collected and analyzed the information of shapes through a direct contact survey to understand the breast figures and the measurements of bodies to provide basic information to improve brassiere production for adult females in China. Data was analyzed through a SAS 9.0. The characteristic of the final brassiere pattern that had been corrected and complemented from the results of the $l^{st},\;2^{nd},\;3^{rd}$, and $4^{th}$ fitting tests is defined as a brassiere inserted with a round wire that has the 3/4cup to wrap the bust area by about 3/4. It consists of an upper and lower nonwoven fabric cup that has a flat-shaped wing of a circular dart. The drawing method of the pattern of this brassiere is applied with the conditions to cover the body naturally under the diverse and organic relations of the material factor of stretch material and wire, functional factor, and sewing factor. The final pattern is created as a bigger angle of wing pattern and a short inner side diameter because there are more Chinese women with a back of bending figure compared to Korean women.
In a reinforced concrete building different shapes of column are adopted depending on the structural orientation and the architectural aspect. When there is an increase in loading due to changes in usage or revision in the design codes these columns need to be strengthened for enhanced performance during their service life. Strengthening materials such as carbon fiber and glass fiber polymer has been successfully used however, due to high cost application other alternative materials need to be explore. Galvanized steel wire mesh (GSWM) is one of the suitable materials locally available. High tensile strength, low weight, corrosion resistance, easy installation, minimum change in dimensions of the sections and cost effectives are the advantages of GSWM. Therefore, in this paper, four different shapes of column such as circular, square, rectangular and L were wrapped with different layers GSWM and jacketed with mortar. All the specimens were tested under axial compression. The objective of the study is to investigate the effectiveness of GSWM as a confining material for strengthening of column having varying shape. Test results shows that the axial strength enhanced with wrapping of GSWM jacket and a circular column presented the highest load carrying capacity and ductility as compared to the others. From the study of 22 column specimens, it is found that axial load is increased upto 20% and 19% when circular and square column are strengthened with one wrap of GSWM respectively, while a rectangular and L column required a wraps of two and three layers respectively in order to achieved the same load capacity as that of a circular column. Based on the present study, it is concluded that GSWM can be effectively used for strengthening of different shapes of concrete columns economically.
This paper proposes a dispatch unit of GP-GPU with SIMT architecture to support the acceleration of general-purpose operation as well as graphics processing. If all the information of an operand used instructions issued from the warp scheduler is decoded, an unnecessary operand load occurs, resulting in register loads. To resolve this problem, this paper proposes a method that can reduce the operand load and the load on the resister by decoding only the information of the operand using a pre-decoding method. The operand information from the dispatch unit is passed to the operand selection unit with preventing register bank collisions. Thus the overall performance are improved. In the simulation test, the total clock cycles required by processing 10,000 arbitrary instructions issued from the wrap scheduler using ModelSim SE 10.0b are measured. It shows that the application of the dispatch unit equipped with the pre-decoding function proposed in this paper can make an improvement of about 12% in processing performance compared to the conventional method.
Seo, Jung-Min;Min, Kyung-Ho;Hwang, Beong-Bok;Lee, In-Chul;Ruchiranga, Jayasekara Vishara;Jeon, Han-Yong;Jang, Dong-Hwan;Lim, Joong-Yeon
Advanced Composite Materials
/
v.17
no.3
/
pp.247-258
/
2008
This paper is concerned with the long-term performance of geo-textile (GT) composites in terms of creep deformation and frictional properties. Composites of PVA GT and HDPE GM were made to investigate the advanced properties of long-term performance related to waste landfill applications. The same experiments were also performed for typical polypropylene and polyester GT and compared to PVA GT/HDPE GM composites. We also develop high performance GT composites with GM by using PVA GT, which is capable of improving the frictional properties and thus enhances long-term performance of GT composites. Experimental study reveals that the friction coefficient of GT composites is relatively large compared with those of polyester and polypropylene non-woven GT as long as the friction media has similar size to the particles of domestic standard earth. In addition, the geo-composites bonded with geo-grid by a chemical process were investigated experimentally in terms of strain evaluation and creep response values. Geo-grid plays an important role as a reinforcing material. Three kinds of geo-grid were prepared as strong yarn polyester and they were woven type, non-woven type, and wrap knitted type. The sample geo-grids were then coated with PVC. The rib tensile strength tests were conducted to evaluate geo-grid products in terms of tensile strength with regard to single rib. The test was performed according to GRI-GGI. It was concluded again from the experiments that the tensile and creep strains of the geo-grid showed such stable values that the geo-grid prepared in this study could protect geo-textile partially in practical structures.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.