• 터널과지하공간
• /
• 제6권3호
• /
• pp.260-266
• /
• 1996

Safety concern is one of the most important parameters in the design of explosive building demolition. Laboratory experiments were performed to investigate the failure behaviour of concrete columns and the effects of protection materials. Fourteen reinforced columns with two sizes were constructed and the effects of protection materials were tested for two kinds of materials: non woven fabrics and wire net. The results showed that control of gas effects is a key to the control of flying chips. It was recommended to use both wire net and non woven fabrics as primary and secondary protection materials. Such protection method was successfully applied to the explosive demolition of 16 and 17-strory apartment buildings.and the results of a simulation on a model tunneling workings using diesel equipments are introduced. In case of typical model of tunneling face, the gas concentration of human height is about one third of roof concentration and right side half of the tunnel shows better environment than left half. NOx concentration of workings can be estimated about 0.45ppm which is much lower than permissible level(5 ppm).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.828-837
• /
• 2006

Geotextiles consist of three major types of geosynthetic material (woven, non-woven and composite) and the functions of geotextiles are separation, reinforcement, filtration, drainage and as a moisture barrier. Although the many research scholar and engineer developed and established the design criteria and construction methodology, sustainable research still needed for optimum design methodology to the complicate field conditions. In this study, in-situ rainfall test performed to develop suitable filter system for sea dyke upper slope filter layer. In-situ rainfall test conducted for seven different filter system and measured the infiltration flux and pore pressure at various filter layer. Based on the test results, the double layered geotextile filter and sand transition system is most suitable for sea dyke upper filter layer because which system is effective for drainage of infiltration flow and minimize the deformation of sea dyke cover stone.

• 한국의상디자인학회지
• /
• 제12권3호
• /
• pp.57-71
• /
• 2010

This study is to understand the actual condition of design and material of peanut-shaped diaper with looking at the types and characteristics of baby cloth diapers and domestic peanut-shaped diapers registered in the Patent Office. Furthermore, it is to suggest the basic data for designing more functional and comfortable cloth diapers. Here are the research result on the actual condition of design and material of baby cloth diapers. Firstly, 11 cloth diapers registered in the Patent Office can be divided into panty-shaped and straight line-shaped diapers. There are 7 kinds of panty-shaped cloth diapers which satisfy both the convenience of a disposable diaper and sanitation of a cloth diaper, and 4 kinds of straight line-shaped cloth diapers that minimize the weaknesses of existing cloth diapers. Secondly, domestic peanut-shaped cloth diapers can be divided into peanut-shaped, inserted, winged, velcro-attached diapers. Among 23 kinds of peanut-shaped cloth diapers from 16 companies, there are 12 kinds of peanut-shaped diapers which consist of layers of cloth to make peanut shape. There are 6 kinds of inserted diapers that insert extra diapers or handkerchiefs in between two sheets of cloth diapers and 3 kinds of winged diapers designed to shorten drying time with sawing only one side of several layered sheets. Also, there are 2 kinds of velcro-attached diapers that are removable according to the amount of excreta. Commonly used materials are cotton woven of diamond jacquard and knit of diamond Hole Stitch or Plain Stitch. And for handing the edge of diaper, the method of wrapping up the edge with cotton woven or knit bias is used.

• Fibers and Polymers
• /
• 제7권3호
• /
• pp.245-249
• /
• 2006

The effect of scouring, bleaching and dyeing on the low stress mechanical and surface properties of wool woven fabrics was studied. Fabric properties were measured by the KES-FB system. In general, mechanical properties of the treated fabrics are greatly affected by scouring, moderately by dyeing and least by bleaching.

• 대한가정학회지
• /
• 제30권4호
• /
• pp.1-13
• /
• 1992

A computer simulation method for textile designs was developed using a generic-purpose graphics program, LUMENA and its results were applied for costume design simulation. Its design performance was comparable with those using specialized design package programs which are in general very expensive. Three areas of textile design, print pattern design, weaving design, and knitting design, were covered. In the print pattern design simulation, a gird network library was constructed by using basic methods of repeat, and a pattern library by scanning existing print patterns. Through the modification and synthesis of library patterns, many new print patterns could be obtained. In the weaving design simulation, a thread library and a draw-down library were constructed. Using them, simulations of woven textile structures were carried out. In the knitting design simulation, a stitch library and a detail library were made from various types of knit stitch and detail drawings of knit costume, respectively. They were used to make structural knitting patterns and jacquard knitting designs. Using those simulated textile designs, costume design simulation was carried out.

• 한국의류학회지
• /
• 제31권2호
• /
• pp.189-196
• /
• 2007

The purpose of this study was to find out the purchasing practices and consumer's needs for pet dog apparel to provide useful information for the manufacture of pet dog's apparel. Data were obtained from 203 consumers who have purchased dog apparel(55 male, 148 female). 57.9% of them were 20-30 years old, 27.9% were living in houses, 54.3% were apartment residents. The kinds of dog included were Shihtzu, Martise, and Yorkshireterrier, and 2/3 of the respondents own a single dog, the remainder have at least two dogs. The most important factor to consider when purchasing dog apparel was size, followed by comfort, design, and materials in that order, Most of the apparel was purchased with convenience as the primary consideration, and the average price was 10-30 thousands won, and the items were purchased at pet beauty shops or specialty shops. For materials, it showed that the majority preferred cotton or a cotton mixture which was woven or woven with knit. The survey revealed that the main purposes for the apparel were, in order, to protect the dog from cold weather and direct sunlight, to be good looks and to memorialize a special day. Consumers put the apparel on their dogs 1-3 times per week, on average, and also when they went out for a walk. They were satisfied with the design, color and quality of the material now on the market, but unsatisfied with size and price. They have a preference for cute, but simple designs and a functional style. The respondents wanted to have material that was mild or neutral, stain-resistant, and something that would repel insects.

• 감성과학
• /
• 제13권1호
• /
• pp.279-284
• /
• 2010

본 연구는 직물구조 디자인의 데이터 베이스에 대한 기초 연구를 수행한다. 이를 위해서 소모직물과 면직물들의 직물밀도계수가 월츠 교수와 피카놀 회사에서 제안된 커버팩터와 관련시켜 분석되고 토의된다. 또한 소모직물과 면직물의 직물밀도계수와 커버팩터와의 관계가 직물조직과 실의 번수에 따라 분석 토의된다. 끝으로 이들 천연직물들의 염색 가공공정에서의 공정수축률이 직물밀도계수와 함께 직물구조 디자인의 데이터베이스 시스템의 예비 연구로서 분석 토의된다. 그 결과는 소모직물과 면직물의 밀도계수, K 값은 600에서 1000까지 분포하였으며 이들 직물들의 직물밀도계수는 0.4에서 0.8 그리고 0.2에서 1.0의 범위에서 각각 분포하였다. 모직물의 가공축은 2%에서 10% 그리고 면직물의 가공축은 2%에서 20%까지 분포하였다. 그리고 모직물과 면직물의 직물밀도계수는 직물구조디자인에 대한 데이터 베이스의 개념으로서 직기와 직물구조 그리고 직축과 가공축에 따라서 분포됨을 보여주었다.

• Composites Research
• /
• 제33권2호
• /
• pp.61-67
• /
• 2020

프리폼 성형은 섬유 직조물을 이용한 RTM 성형에 있어서 매우 중요한 부분을 차지하고 있다. 탄소 섬유 직조물의 프리폼의 변형은 소재의 강도에 영향을 미치며, 그 중 전단 잠김 각도를 넘어서는 힘이 작용하게 되면 제품에 주름이 발생되어 RTM공정 시 불량발생의 원인이 된다. 그러므로 본 연구에서는 탄소섬유직조물의 전단변형 허용치를 정량화하고 실제 직조물의 성형과 수치모사를 이용하여 성형 특성을 검증하고자 한다. 그 결과 섬유 방향의 설정에 따른 주름의 특성을 확인하고 그 결과를 평가하였다. 앞에 언급한 물성 측정 결과들을 이용하여 수치해석을 수행하였고, 이 결과를 실험 결과와 비교 분석하였다.

• 한국의류산업학회지
• /
• 제16권2호
• /
• pp.326-332
• /
• 2014

To develop cool touch feeling fabrics for summer clothing material, it was manufactured several compositions of woven fabrics, having rayon multi-filament yarn (non-twisted) as warp and various kinds of yarn, such as viscose rayon multi-filament yarn (twisted), tencel$^{(R)}$ spun yarn, PET high absorbance quick dry filament yarn, and PET based rayon-like yarn, as weft. After preparing the fabrics, basic properties of the fabrics were investigated, such as air-permeability, tensile strength, absorption rate, drying rate, etc. Also, surface warm / cool sensations of the woven fabrics were assessed by Qmax Warm / Cool Touch Tester. It was observed that the fabrics composed of viscose rayon multi-filament yarn (warp) and PET high absorbance quick dry filament yarn (weft) showed excellent surface cool touch sensation-the highest Qmax value. This is because the fabric having flat shaped PET high absorbance quick dry filament shows the largest contact area with Qmax measuring plate. And, the fabric also showed superior high absorbance and quick dry property as expected. In addition, we treated phase change material (PCM) on the surface of the fabric composed of viscose rayon multi-filament yarn (warp) and PET high absorbance quick dry filament yarn(weft) to improve the cool touch feeling. However, the surface cool touch feeling was impaired by resin treated with PCM during the finishing process.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.247-258
• /
• 2008

This paper is concerned with the long-term performance of geo-textile (GT) composites in terms of creep deformation and frictional properties. Composites of PVA GT and HDPE GM were made to investigate the advanced properties of long-term performance related to waste landfill applications. The same experiments were also performed for typical polypropylene and polyester GT and compared to PVA GT/HDPE GM composites. We also develop high performance GT composites with GM by using PVA GT, which is capable of improving the frictional properties and thus enhances long-term performance of GT composites. Experimental study reveals that the friction coefficient of GT composites is relatively large compared with those of polyester and polypropylene non-woven GT as long as the friction media has similar size to the particles of domestic standard earth. In addition, the geo-composites bonded with geo-grid by a chemical process were investigated experimentally in terms of strain evaluation and creep response values. Geo-grid plays an important role as a reinforcing material. Three kinds of geo-grid were prepared as strong yarn polyester and they were woven type, non-woven type, and wrap knitted type. The sample geo-grids were then coated with PVC. The rib tensile strength tests were conducted to evaluate geo-grid products in terms of tensile strength with regard to single rib. The test was performed according to GRI-GGI. It was concluded again from the experiments that the tensile and creep strains of the geo-grid showed such stable values that the geo-grid prepared in this study could protect geo-textile partially in practical structures.