• 한국의류학회지
• /
• 제41권3호
• /
• pp.458-467
• /
• 2017

There is increased interest in clothes dryers and garments made of spandex-blend woven fabrics; however, there is limited information available for the laundering and drying these clothes. This study investigates the effects of washing and drying on shrinkage, skewness, and wrinkle for woven fabrics with and without spandex. When spandex with good elastic recovery was blended, the deformed shape from washing and drying improved skewness and wrinkle by easily returning to its original shape. However, these properties had a negative effect on shrinkage in terms of length and area change. When the influence of clothes maintenance was classified, the drying process had the biggest influence of 58%, followed by spinning-rinsingwashing. Tumble drying, in which the fabric is exposed to mechanical force and heat for a long period, had more negative effects on the dimensional stability than line drying. The spandex blend had the effect of preventing skewness and wrinkle in garments, but it was also shown to accelerate shrinkage by garment maintenance cycles. It was important to control drying in order to reduce shrinkage during the maintenance process; consequently, this had the greatest influence on the dimensional stability of fabrics. Therefore, line drying was more advantageous for spandex-blend fabrics than tumble drying in terms of management for shrinkage, skewness, and wrinkle.

• 한국의상디자인학회지
• /
• 제11권3호
• /
• pp.101-110
• /
• 2009

Danchung(丹靑) is the traditional Korean patterns that are decorated with various colorful patterned paintings upon each sections of wooden architecture. Although Danchung consists of variety patterns with the meaningful signs and symbols, as an accomplishment of Korean traditional images, there is a few fashion merchandise by Danchung patterns. Therefore, the purpose of this study is about to design Jacquard fabrics, and to develop bags of Jacquard fabric by Danchung patterns, as a differentiated cultural Fashion Merchandise. The theoretical background was researched for the geometric image of Danchung patterns on the basis of the basic elements, compositions and symbolic meanings of Danchung. The geometric image of Danchung patterns, which had the shape of circle, triangle, square and hexagon, was designed to the surface design by Jacquard CAD system(i.e., EAT Designscope by Germany) and woven into Jacquard fabrics by Stabuli electronic Jacquard system. Danchung patterns for fabric design in this study was mainly focused on 'ChipJaGum', 'SamJiChangGum', 'ShouSulGum', Moro patterns of lotus flower(蓮花), Rok-Wha(綠花) and so on. To development bags of jacquard fabric, those woven jacquard fabrics were manufactured to bags by applying the selected of twelve bag-designs among the current bag styles. These manufactured bags of jacquard fabrics in geometric Danchung patterns were appeared a contemporary yet ethnic feeling so that they can be used for the unique korean cultural products to further commercialization.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1989년도 제2차 학술발표초록집
• /
• pp.87-88
• /
• 1989

• 한국의상디자인학회지
• /
• 제12권2호
• /
• pp.119-129
• /
• 2010

오늘날 인간의 수명이 연장되고, 웰빙과 건강에 대한 관심이 증가됨에 따라서 언제 어디서나 건강을 모니터링 할 수 있는 건강 스마트 의류 시스템이 개발되고 있다. 이를 위하여 최근에는 생체신호의 모니터링이 가능하도록 디자인된 의류에 통합된 형태의 직물 전극이 개발되고 있다. 혁신적으로 의류 시스템에 통합되어 착용 가능한 니트, 우븐, 자수방식의 텍스타일 전극에 대한 다양한 연구가 개발 제시되고 있으며, 이의 일부는 상용화되어 있다. 이에 본 연구는 경위사의 일정한 직조제어 자동화 시스템이 가능한 컴퓨터 자카드 직기의 캐드(CAD) 직조디자인 방식을 통하여 생체신호 센싱 기능이 향상된 새로운 텍스타일 전극디자인을 연구하고자 하였다. 이를 위하여 본 연구에서는 기존 생체신호 센싱 전극의 개발 및 연구 동향, 비직물/전극 타입에 대한 단점과 장점에 대한 비교 분석을 이론적으로 살펴보고, 자카드 직조 직물 기반으로 심전도 센싱용 텍스타일 전극을 디자인하여 실험 연구하였다. 자카드 직조 방식의 심전도 센싱용 직물 전극은 전극 인터페이스 디자인 방식, 이중직물형 직조 디자인 방식, 사가공 등의 요인들을 고려하여 개발하였다. 본 연구에서 도출된 최종 자카드 직조 직물 기반의 텍스타일 전극은 스마트 의류에 통합시킨 텍스타일 전극 모듈로서 적용되여 향후 상용화 방안을 모색할 수 있다.

• 복식문화연구
• /
• 제29권6호
• /
• pp.932-948
• /
• 2021

Tartan, the woven, checked, and wool textile considered by many to be originally from Scotland, has in fact been in use in a range of forms across numerous cultures and during various historical periods. The characteristic checked feature is due to the assembly of different coloured threads in both warp and weft directions which intersect at 90 degrees in a combination known as a sett. For well over one hundred years, different setts and thus different colour combinations have been associated closely with different geographical regions within Scotland, as well as different clans or families. Tartan-type textiles have reached popularity at various times and those have often been a predicted fashion trend suggested, for example, by contributors to fashion gatherings such as Premier Vision in Paris. Often proposed designs are best considered based on tartan combinations rather than simple reproductions. Promotional terms such as "patched checks" or "textured checks" have been common, and often these have been derived from tartan-type constructions. This paper explores novel pattern design methods by identifying the underlying grid structures and proportions exhibited by various well-known tartan setts. The possibility of pattern development from tartan grids and their manipulations is thus the focus of attention. An insight into the methodology associated with the production of original pattern designs is thus provided.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.331-338
• /
• 2014

In this research, split-type complex yarn of 20:80, 40:60, 50:50 nylon6/polyester composition ratio was used in order to impose unique sense on split-type complex woven. After treating both split-type complex yarn of each ratio and its produced woven in alkali solution, we got the following results by checking physical properties based on alkali proportion and treatment time. Under the condition of NaOH 20% in this experiment, it took approximately double time 20% loss of weight. The loss of weight became high when polyester proportion of N/P(nylon6/polyester) composition ratio was low, in the same fineness yarn. Even though polyester proportion was low, the loss of weight was low when the fineness was high. N/P division was well processed at about 25% loss of weight under the condition of NaOH 20%, treatment temperature $50^{\circ}C$, and treatment time 60 minutes. The research provides that the loss of weight should be processed around treatment time 24 hours in the case of NaOH concentration 15%, and treatment time 15 hours in the case of NaOH concentration 18%, respectively, in order to achieve N/P woven division ratio of about 70%-80% in industrial fields.

• 한국지반신소재학회논문집
• /
• 제3권1호
• /
• pp.37-42
• /
• 2004

보강토 옹벽시스템에서, 부직포 지오텍스타일은 블럭이 시공될 때 보강토체의 전면에 노출, 포설되어 있다. 임시구조물에 보강토 옹벽이 적용될 때 지오텍스타일은 시공기간 중 일광에 노출되게 된다. 이 기간 중, 자외선에 의해 부직포 지오텍스타일의 분해가 발생하게 된다. 따라서 현장시공의 관점에서 부직포 지오텍스타일의 자외선 저항성이 명확하게 평가되어야만 한다. 본 연구에서는 실험실 및 현장시험을 수행하여 KOESWall 시스템에 사용되는 부직포 지오텍스타일의 자외선 저항성이 평가되었고, 그 결과를 SEM 사진과 인장특성으로 나타내었다.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.39-44
• /
• 2021

In molding of continuous fiber-reinforced thermoplastic composites, it is very difficult to impregnate between the reinforcements and the matrix since the matrix has a high melting temperature and high viscosity. Therefore, most of composite molding processes are divided in the manufacturing processes of intermediate materials called prepreg and the forming of products from intermediate materials. The divided process requires additional facilities and thermoforming, and they increase the cycle time and cost of composite products. These problems can be resolved by combining the continuous fiber-reinforced composite molding process with injection molding. However, when a composite material is manufactured by inserting woven fabric into the injection mold, poor impregnation occurs on the surface of the molded product. It affects the properties of the composites. In this paper, through an impregnation experiment using cores with different heat transfer rates and pore densities, the reason for the poor impregnation was confirmed, and molding experiments were conducted to produce composite with improved surface impregnation by inserting the mesh. And also, the surface impregnation and deformation of composites molded using different types of mesh were compared with each other.

• 한국의류학회지
• /
• 제45권1호
• /
• pp.46-55
• /
• 2021

Seam puckering and the seam strength of conductive threads used to produce smart clothing were analyzed according to stitching methods and fabrics. Samples were prepared in a lock stitch and zigzag stitch on plain woven and jersey knit fabric, using one type of polyester sewing thread and three types of commercial conductive threads that consisted of two types of stainless-steel conductive threads (TST and MST) and one type of silver conductive thread (SSV). Seam pucker percentages, shapes, and seam strength were measured. On plain woven fabric as well as jersey knit fabric, three-ply TST and MST showed a higher SP percentage compared to a polyester sewing thread. Meanwhile, single-ply SSV showed the lowest SP percentage. In addition, the SP percentage of the zigzag stitch decreased along the weft and course directions of the fabric, and decreased significantly as the number of fabric layers increased. Moreover, there was a marked tendency for a higher SP percentage in jersey knit fabric compared to plain woven fabric, and the two-dimensional cross-section waveforms of stitches obtained using three-dimensional data that showed increased irregular waveforms and peaks in the zigzag stitch. There were no correlations between seam strength and tensile strength.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1554-1561
• /
• 2005

Geotextiles form one of the two largest groups of geosynthetics and it is consisted two major types of synthetic material (Woven, Non-woven). The functions of geotextiles are separation, reinforcement, filtration, drainage and as a moisture barrier. Within these functions, however, there are a large number of applications or use areas. Although the many research scholar and engineer developed and established the design criteria and construction methodology of geosynthetics filter layer, because the lack of suitable design terminology and uncertainty of long term durability, sustainable research still needed for optimum design methodology to the complicate field conditions. Especially, more intensive research needed about under the cyclic flow condition and fine silty sand base material. In this paper, the filter model test performed under cyclic flow with various boundary conditions (period and frequency of cyclic flow, types of geosynthetic filter material, surcharge etc.).