• 감성과학
• /
• 제13권2호
• /
• pp.391-402
• /
• 2010

전기방사한 나노섬유 웹은 가는 섬유직경과 수많은 미세공극 구조로 인해 우수한 투습성 및 차단 성능을 나타내며, 초박막 초경량의 특성을 갖는다. 이러한 특성 때문에 새로운 투습방수 소재로서 전기방사한 나노섬유 웹을 이용하고자 하는 시도가 이루어지고 있으며, 본 연구에서는 나노섬유 웹 처리소재의 역학적 특성을 측정하고 이를 기존 투습방수 소재와 비교함으로써 기능적 성능과 더불어 감성적 성능을 만족시키는 새로운 투습방수 소재 개발을 위한 기초자료를 제시하고자 하였다. 실험실 제작(lab-scale) 나노섬유 웹과 대량생산(commercial) 나노섬유 웹을 이용하여 웹 밀도와 기반 직물, 적층 구조, 라미네이팅 여부 등에 차이를 두어 다양한 전기방사 나노섬유 웹 처리소재를 제작하였다. 이들 시료에 대해 KES-FB system을 이용하여 역학적 특성을 평가하고, 이를 기존 투습방수 소재인 고밀도 직물, PTFE 라미네이팅 직물, PU 코팅 직물의 역학적 특성치와 비교하였다. 연구 결과, 실험실에서 제작한 나노섬유 웹 처리소재는 부피감이 있으면서 유연하였고, 대량생산된 나노섬유 웹을 라미네이팅한 소재는 신장 변형이 적은, 치밀한 구조의 소재인 것으로 나타났다. 또한 고밀도 직물과 실험실 제작 나노섬유 웹 처리소재는 낮은 인장선형성과 굽힘강성, 전단강성으로 유사한 거동을 나타내어, 기존 PU 코팅이나 PTFE 라미네이팅 직물에 비해 뻣뻣함이 덜하면서 유연하고 부드러운 태를 가지는 것으로 해석되었다. 따라서 전기방사 나노섬유 웹 처리소재가 일정 수준의 방수성을 확보한다면 기능적 성능과 감성적 성능을 모두 충족시키는 새로운 투습방수 소재로 이용될 수 있을 것으로 사료된다.

• 한국지반공학회지:지반
• /
• 제12권4호
• /
• pp.157-178
• /
• 1996

기존의 보강토벽체에 주로 이용되어온 steel strict등 고강도 인장보강재는 주변 뒤채움흙에 비해 상대적으로 변형이 작기 때문에, 설계검토시 과강재 자체에서 유발되는 변형의 크기에 대해서는 크게 유의할 필요가 없었다. 그러나 비교적 저강도인 섬유보강재의 경우, 한계상태에서 예상되는 섬유보강재 자체의 변형량은 주변 뒤채움흙의 소성변형 유발에 필요시 되는 변형량을 종종 초과하게 되며, 이와같은 크기의 과도한 변형량은 보강토벽체 구조체 자체의 안정성 확보 측면에서 허용할 수 없는 경우가 대부분이다. 결국 보증토벽체 구조체의 전면부 발생변위에 대한 일반적인 허용조건을 충족하기 위해서는, 극한강도 보다 훨씬 작은 크기의 강도가 섬유보강재의 경우 발휘하는 것으로 보아야 할 것이며, 따라서 최종적인 구조체 안정검토를 위해서는 보강재 자체의 예상변형량에 대한 평가가 섬유보강재의 경우 특히 중요시 된다. 보강재의 인장응력 -변형률 관계는 강보강재의 경우 선형탄성거동으로 가정할 수 있으나, 섬 유보강재의 경우에는 일반적으로 비 선형거동을 나타낸다. 본 연구에서는 쌍곡선 함수를 이용하여 섬유보강재의 비선형 거동특성을 모델링하였으며,또한 뒤채움흙 다짐으로 인한 유발응력등을 고려하기 위해 Ehrlich SE Mitchell, Duncan등이 제안한 방법을 수정하여 섬유 보강토벽체의 안정 해석법을 제시하였다. 본 안정 해석법 에서는 침투수압의 영향 및 뒤채움흙의 구속효과에 따른 섬유보강재의 부분적인 상대강성 변화 등을 고려하였으며, 이를 토대로 깊이별 각 섬유보 강재의 최대인장력 및 변형량 등의 예측이 가능하다. 본 연구에서는 제시하리라 하는 안정해석법의 적용성을 위해, paraweb polyester fibre multicord, non-woven polyester 지오텍스타일 및 knitted polyester 지오그리드 등 3가지 종류 보강재의 인장응력-변형률 관계 실험결과를 회귀분석하여 쌍곡선 함수형태로 이와같은 섬유보 강재의 비선형거동을 모델링하였다. 또한 이를 토대로 한 븐 연구 해석법의 적합성 검토를 위해, Ho & Rowe가 제시한 유한요소해석결과 및 LCPC, FHWA등에서 시행한 시험결과와 깊이별 각 섬유보강재의 최대인장력,변형량 및 지점별 변형률 등에 대해서도 비교하였다. 아울러 섬유 보강재의 상대강성, 뒤채움흙의 깊이별 구속효과의 정도, 다짐정도 및 침투수압 등이 각 섬유보강재의 변형량 및 전체적인 변형형태 등에 미치는 영향을 종합적으로 분석하였다.

• 감성과학
• /
• 제14권1호
• /
• pp.117-126
• /
• 2011

이 연구는 감성의류용 형상기억 메모리직물의 제조 방법과 물성을 조사하기 위해 저온열처리와 정장열처리 가연법을 폴리프로필렌 POY와 SDY에 각각 적용하고 이들 사를 사용하여 PP형상기억메모리 직물을 air-jet직기에서 제조하였다. 물성비교를 위해서 PET와 PTT형상기억메모리 직물도 같이 제직하여 4가지 형상기억 메모리 직물시료를 만들고 이들의 여러 가지 물성을 측정 비료분석하여 다음과 같은 결론을 얻었다. PP형상기억 메모리 직물에 사용하기 위해 저온가연법과 정장열처리법에 의해 만든 PP가연사의 물성은 절단강 신도가제직성에 문제가 없는 값을 가졌으며 특히 열수축율이 습열은 1.5% 이하 건열은 3~5% 범위를 가짐으로써 PTT의 5~8%의 높은 열수축율에 비해 열적 안정성을 가졌다. PP형상기억 메모리 소재의 변형된 형태를 유지하는 소성적 성능 특성 평가법인 Toray 방추성 평가는 PP소재가 PTT와 같은 5급을 나타냄으로써 우수한 변형 유지특성을 보였다. 또한 PP형상기억 메모리소재의 보온성은 PTT소재보다 약 56% 향상된 결과를 보였으며 스프레이법에 의한 발수성은 PTT소재에 발수처리한 소재와 동일하게 5급의 우수한 발수성을 보였다. 그리고 PP형상기억 메모리소재의 형상기억 특성을 평가 할 목적으로 3D 이미지 방법과 카메라 측정결과 PTT소재와 비슷한 형상기억 특성을 보임을 확인 할 수 있었다.

• 한국의류학회지
• /
• 제37권7호
• /
• pp.864-873
• /
• 2013

This study analyzed the correlation between the sources of the complaints and various factors such as gender, garment type, fabric type, textile material and washing methods for products. This survey utilized a total of 2,609 consumer apparel product complaint cases filed with the Korea Consumer Agency between 1997 and 2009. In regards to consumer liability: it was found that more incidents of failures due to carelessness were reported among men's clothes, knitted garments, cotton clothes, polyester clothes, wool blend clothes, pants, shirts, sportswear, and laundry only clothes. In regards to dry cleaner's liability: women's goods, woven clothes, silk clothes, cotton blend clothes, jackets, shirts and hanbok, and dry clean only clothes indicated problems more frequently. In regards to manufacture's liability: women's clothes, woven clothes, wool clothes, silk clothes, wool blend clothes, polyester blend clothes, formal dress clothes, jackets, hanbok, and dry clean only clothes indicated problems more frequently. This study provides consumers with information necessary to take preventive measures and basic information that can be utilized to improve the quality of production and services by understanding the sources of dissatisfaction, type of clothes found with problems, and the main causes of consumer complaints for garment products according to who is liable.

• 복식문화연구
• /
• 제17권1호
• /
• pp.15-27
• /
• 2009

The purpose of this study was to find texture which suitable for the acryl knitted jacket of women in the middle age. The study was carried out 2 parts. The first part was to choose the pattern fitted in the body shape of women in the middle age, and the second part was wearing test with 3 different textured acryl knitted jacket(half milano, milano, jacquard). The usable data of the test were coded for further statistical analysis including descriptive statistics (frequency and one way-ANOVA test, Student-Newman-Keuls Multiple Range Test) by using SPSSWIN 12.0. The results were as follows: It was found that first evaluation for the appearance test on fitness, pattern B(Brand: Morado) were better than the rest of them(pattern A: Trieste, pattern C: Escalier). It was found that second evaluation for the test, jacket with jacquard were better than the rest of them. Acryl knitted Jacket of women in the middle age should made of jacquard. Therefore it should be designed as possible as considering the physical characteristics of knitted materials. It was found that third evaluation for the test, it was opposite results that a general knitted fabric pattern was made smaller than a woven jacket. So, it was necessary that the acryl knitted jacket of women in the middle age follow a similar site tolerance such as a woven jacket. This result was due to a radical change of a middle age women's body shape.

• 복식문화연구
• /
• 제23권5호
• /
• pp.922-927
• /
• 2015

Checks are best considered as a (visible) sub-set of grids, and each check consists of two assemblies of parallel lines, one superimposed on the other at ninety degrees. In the conventional textile context, one assembly of parallel yarns is superimposed on another at ninety degrees. These parallel lines caused by the yarns remain visually apparent in the finished composition. Commonly, checks are considered simply as a variety of woven textile and Scottish clan tartans, or plaids (common terminology for tartans in the USA), famously display a checked feature, using differently colored yarns in woven-textile form. Often the sequence of colours and the numbers of yarns used is equal in both warp and weft directions. Where this is the case, the tartan may be considered to be 'balanced' or 'regular', with the component yarns creating square units repeating across and down the fabric. Thus in balanced tartans, lengthways components have identical ordering, colouring and measured width to those used widthways. Meanwhile an unbalanced check lacks one or more of these attributes. This paper explores further the nature of Scottish clan tartans, using data collected from collections of rare tartans held at ULITA - An Archive of International Textiles at the University of Leeds.

• 대한가정학회지
• /
• 제12권1호
• /
• pp.459-471
• /
• 1974

This study was carried out on the thermal transmission on account of variation of weaves and researched on the selection of the most suitable weaves for warmth. Also the interrelation among the density, thickness and thermal transmission by different weaves was studied, the author has woven three fundamental weaves, five weaves derived from the fundamental weaves and two special weaves for the purpose of experiment. In weaving of fabrics for experiments the lever type hand loom was used. Testing of texture was carried out according to KS and ASTM. The thermal transmission was also tested by as cooling method which were developed by the author. The conclusions of experiments were as follows. 1. Matt weaves, honey comb weaves and satin weaves having long floating yarns have large cover factor and were thicker. these structures of the weaves were good in warmth. 2. Thermal transmission was reciprocated to the cover factor, thickness and value of cover factor multiplied by thickness : It was found that the weaves of woven fabrics for warmth had better use of satin weaves, Matt weaves, Granite weaves and Honey comb weaves. In the time of warmth is not the first purpose, had better use of Rib weaves. Plain weaves and Twill weaves with thin thickness and high thermal transmission.

• 한국의류산업학회지
• /
• 제6권6호
• /
• pp.785-798
• /
• 2004

Silk has always been coveted as the finest and richest of all fibers woven into cloth. The earlist woven silk fragments found to date come from the third century B.C. The filament created and spun into cocoon by the larva of the silk moth, silk was exported from China to Europe from as early as the third century B.C. Silk industry is export leading industry that guide national textile industry development after the 1960s in Korea. Korean silk industry reached to peak at 1975 is displaying appearance that export scale is decreased recently. Various kinds methods can be proposed for high value added in silk industry, the research about color is essential. The importance of color is increasing in modern textile and fashion industry. Color is important factor of textile and fashion industry because color affects strong influence in human's sensitivity. Silk fabric can give high added value developing high sensitivity color because dye ability is superior. In this study I planned the "Utility Silk Color Code 288" for efficient color management in silk industry. "Utility Silk Color Code 288" are attached the Munsell notation and dyeing data which can reappear the color when needed. This research constructs for insufficient domestic color infrastruction and expect that basic role to develop the competitive power for Korean silk industry.

• 한국의류학회지
• /
• 제27권1호
• /
• pp.134-142
• /
• 2003

Performances of Taekwondo fabrics were evaluated in respect of fiber component. yarn count, weave structure and wearing comfort. As a beginning step, we investigated the present situation of Taekwondo wears by questionnaire from pro and amateur Taekwondo players. Samples employed in this study were cotton/nylon blend fabric that was newly woven for this study as well as fabrics of current Taekwondo wears for sale in the market. Their fundamental properties measured were such as air permeability, water vapor transport. wickability, absorption rate, Qmax values, thermal conductivity, durability, hand value, and etc. In addition, subjective wearing sensations were evaluated using Taekwondo wears made of those fabrics. From the results of the objective measurement and the subjective wearing test, we estimated the total fitness of fabrics as a Taekwondo wear. From the questionnaire we could see that pro players and amateurs wanted highly absorbing, quick drying, and soft-tough and complained abrasive surfaces and static elasticity of current fabrics. In view of the results so far achieved, nylon blended fabrics newly woven in this study, showed better comfort-related properties from both of the objective and subjective tests. It was also represented that finer yams enhanced water absorption and touch, and fabrics with rough surface such as honeycomb weave was superior in wearing comfort as well as aesthetic appearance.

• 한국염색가공학회지
• /
• 제18권2호
• /
• pp.39-45
• /
• 2006

The aim of this work is to develop sense-differentiated textiles using Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The ITY(Interlace Textured Yarn) using T-T yarn with various over feed ratios of PET filament was manufactured with different shrinking percentage of core yarn and then the fabrics were woven on the same weaving 100m using ITY produced. The mechanical properties and the handles of the fabrics were examined with KES-FB system suggested by Kawabata. The shrinkage of ITY was increased with decreasing over feed ratio and increased with increasing heat treatment temperature of T-T yarn. The initial elasticity modulus of ITY was decreased with increasing over feed ratio and heat treatment temperature of T-T yarn. The tensile energy of fabrics was decreased with increasing of over feed ratio, but bending rigidity and shear rigidity of fabrics were increased with increasing of over feed ratio of PET filament. The results indicate that the fabric using T-T yarn with finer than I denier mono filament can be used for the purpose of sense-differentiated textile.