• Composites Research
• /
• 제18권6호
• /
• pp.19-25
• /
• 2005

본 논문에서는 하이브리드 복합재 틸팅차량 차체에 대한 시험적 연구를 수행하였다. 시험에 적용된 하이브리드 복합재 틸팅차량 차체는 길이가 23m이며 40mm두께의 알루미늄 하니콤 코어와 2mm의 직조된 탄소/에폭시 면재로 구성된 샌드위치 구조물이다. 하이브리드 복합재 틸팅차량 차체의 구조적 거동과 안전성을 규명하기 위해 수직하중- 차단압축하중, 비틀림하중 및 3점지지 하중조건하에서 정적인 하중시험을 수행하였다. 시험은 JIS E 7105규격에 근거하여 수행되었다. 시험을 통해 수직하중하에서 최대처짐은 최대 12.3mm이며 굽힘강성은 $0.81\times10^{14}\;kgf{\cdot}mm^2$로 도시철도차량성능기준을 만족하고 있었다. 또한 강도 측면에서도 탄소/에폭시 면재의 파단변형률의 $20\%$ 이내로 안전도를 만족하였다.

• 대한조선학회논문집
• /
• 제57권2호
• /
• pp.104-113
• /
• 2020

The study aims to improve the previous theory-based algorithm on the lightweight design of laminate structures of a composite ship based on the mechanical properties of fiber, resin, and laminates obtained from experiments. From a case study on using a hydrometer to measure the specific gravity of e-glass fiber woven roving fabric/polyester resin used as the raw material for the hull of a 52 ft composite ship, the equation for calculating the weight of laminate was redefined, and the relationship between decreasing mechanical properties and increasing glass content was determined from the results of material testing according to ASTM D5083 and ASTM D790. After applying these experimental data to the existing algorithm and improving it, a possible laminate design that maximizes the specific strength of the composite material was confirmed. In a case study that applied the existing algorithm based on rules, the optimal lightweight design of composite structures was achieved when the weight fraction of e-glass fiber was increased by 57.5% compared with that in the original design, but the improved algorithm allowed for an increase of only 17.5%.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.39-46
• /
• 2006

The fuel cell is one of promising environment-friendly energy sources for the next generation. The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity To achieve desired electrical properties, specimens made with different mixing ratio, processing pressure and temperature were tested. To increase mechanical strength, one or two layers of woven carbon fabric were added to the graphite and resin composite. Thus, the composite material was consisted of three phases: graphite particles, carbon fabric, and epoxy resin. By increasing mixing ratio of graphite, fabricated pressure and process temperature, the electric conductivity of the composite was improved. The results of tensile test showed that the tensile strength of the two-phase graphite composite was about 4MPa, and that of three-phase composite was increased to 57MPa. As surface properties, contact an91e and surface roughness were tested. Graphite composites showed contact angles higher than $90^{\circ}$, which mean low surface energy. The average surface roughness of the composite specimens was $0.96{\mu}m$.

• 한국철도학회논문집
• /
• 제13권1호
• /
• pp.31-36
• /
• 2010

본 연구에서는 직조된 탄소/에폭시 판재와 알루미늄 허니콤 심재를 갖는 샌드위치 복합소재 정사각 튜브의 압축하에서 허니콤 셀 크기의 효과를 규명하였다. 이를 위해, 4종류의 사각튜브가 제작되고 10mm/min의 준정적 하중하에서 200mm~250mm까지 압축하였다. 본 연구에서는 6.35mm와 9.53mm의 셀 크기를 갖는 알루미늄 허니콤에 사용되었다. 평균압축하중과 셀 크기의 관계가 규명되었고, 평균압축하중에 대한 판재와 허니콤의 접착강도(peel strength)와 리본방향의 등가탄성계수의 영향을 분석하였다.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.199-203
• /
• 2003

In order to investigate the effects of cross-sectional shapes on the sound characteristics of polyester fibers, 10 specimens were woven into a twill structure made of round, hollow, triangular, u-shape, cruciform, and composite cross-sectional (▲/▲ ,()/▲, Y/Y) fibers. Their rustling sounds were recorded, and their sound spectra were obtained from FFT analysis. Physical sound parameters (LPT, ΔL, Δf) and Zwicker's psychoacoustic parameters of the loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z) were calculated from the sound spectra. According to noncircular cross-section fibers, the hollow shaped fiber had the highest value of LPT, ΔL, loudness(Z), and fluctuation strength(Z). The triangular shaped fiber had a lower value of LPT, ΔL, loudness(Z), and roughness(Z) than those of the round shaped fiber. Among composite cross-section fibers, C1(▲/▲) and C3 (Y/Y) had higher values of LPT, ΔL, Δf and loudness(Z) but C2(()/▲) had lower values. Also the LPT, ΔL, sharpness(Z), and roughness(Z) values of different denier were similar to each other, but the Δf and loudness(Z) values increased as the denier increased.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.148-152
• /
• 2000

The aluminum alloy 6061-T6 has been successfully used in structural applications especially the pressure vessel of the Advanced Neutron Source research reactor. And aluminum alloys, including 6061-T6, have a face-centered-cubic crystals structure. Under normal circumstances face-centered-cubic crystal structures do not exhibit cleavage fractures even at very lo9w temperatures. In aluminum-based structures, plates frequently find use as connecting links. Mechanical fasteners are often utilized in instances where ease of application, familiarity with fabrication processes, and severe dynamic loading are of concern. Plates frequently find use as connecting elements in structures built from aluminum alloys. Many structural elements employ mechanical fasteners. Twenty and twenty aluminum alloy 6061-T6 plates, representing four different bolt patterns, were mechanically deformed. And variable materials such as A1 6061-T6, Al 2024-T3, Carbon/Epoxy, Glass/Epoxy Composite and Woven fiber composite, are used as patch materials. From this experiment, it has been shown that the strength of patch-repaired specimens is different with the patch materials.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.573-580
• /
• 2005

Model I interlaminar fracture behaviors of the carbon/epoxy composite, one of the candidate composites for a tilting train carbody, were investigate by the use of DCB(Double cantilever beam) specimens. These specimens were made of CF3327 plain woven fabric with epoxy resin, and an artificial starter delamination was fabricated by inserting Teflon film with the thickness of $12.5{\mu}m$ of $25.0{\mu}m$ at the one end of the specimen. Mode I interlaminar fracture toughness was evaluated for the specimens with the different thickness of an inserter. Also delamination propagating behaviors and interlaminar fracture surface were examined through an ooptical travelling scope and a scanning electron microscope. We found that abruptly unstable crack propagation called as stick-slip phenomena was observed. In addition, interlaminar fracture behaviors were affected on the location and the morphology of a crack tip as well as an interface region.

• Composites Research
• /
• 제31권6호
• /
• pp.355-364
• /
• 2018

Flexible energy-storage devices (FESDs) have been studied and developed extensively over the last few years because of demands in various fields. Since electrochemical performance and mechanical flexibility must be taken into account together, different framework from composition of conventional energy-storage devices (ESDs) is required. Numerous types of electrodes have been proposed to implement the FESDs. Herein, we review the works related to the FESDs so far and focus on free-standing electrodes and, especially substrate-based ones. The way to utilize carbon woven fabric (CF) or carbon cloth (CC) as flexible substrates is quite simple and intuitive. However, it is meaningful in the point of that the framework exploiting CF or CC can be extended to other applications resulting in multifunctional composites. Therefore, summary, which is on utilization of carbon-based material and conductive substrate containing CF and CC for ESDs, turns out to be helpful for other researchers to have crude concepts to get into energy-storage multi-functional composite. Moreover, polymer electrolytes are briefly explored as well because safety is one of the most important issues in FESDs and the electrolyte part mainly includes difficult obstacles to overcome. Lastly, we suggest some points that need to be further improved and studied for FESDs.

• Composites Research
• /
• 제29권6호
• /
• pp.342-346
• /
• 2016

경량화 소재 중 CFRP(Carbon Fiber Reinforced Plastic)는 카본 섬유를 이용한 섬유구조물이다. 카본과 플라스틱의 특성을 갖는 복합소재이다. 섬유구조는 섬유방향으로 큰 강도를 갖는다. 이러한 경량 소재인 CFRP로 가장 많이 사용되는 것은 직조된 CFRP이다. 직조된 CFRP는 단방향 CFRP에 비하여 구조가 안정적이기 때문이다. 단직조된 CFRP는 고가이다. 따라서 본 연구는 단방향 CFRP의 섬유 구조 특성을 파악하고자 하였다. 본 연구에서는 적층각도 [0/X/-X/0]로 X를 변수로 갖는다. X의 각도 위상이 반전되어 적층된 단방향 CFRP이다. 이러한 단방향 CFRP를 이용하여 중앙 크랙을 갖는 두께 2 mm 판재 형태의 해석 모델을 이용하였다. 해석에서는 핀으로 연결된 상부와 하부에서 하중이 가해지고 있으며 중앙 크랙부분에서 파단을 연구한다. 해석 모델은 CATIA를 이용한 3D Surface 모델로 설계하였다. CFRP 적층을 위해, ANSYS프로그램에서 ACP를 이용한 적층 방향을 결정하여 2개의 적층들을 갖는 해석 모델을 만들었다. 이후 구조해석을 진행하였다.

• 한국결정성장학회지
• /
• 제6권1호
• /
• pp.73-87
• /
• 1996

새로 개발된 분말침투 및 연속 다중함침법에 의해 제조된 세라믹 섬유 복합체의 기 계적 물성을 3점 곡강도 빛 인장 시험을 통하여 평가하였다. 정확한 물성 측정을 위하여 strain g gauge 빛 acoustic emission 측정 장비가 사용되였다. 실험 시편은 $Al_20_3$직포$Al_20_3$와 SiC직포/SiC를 기본 재료로 하고 있으며, 일방향으로 배열왼 SiC 섬유(Textron SCS - 6)/SiC 복합체를 비교 목적으로 제작 시험하였다. 이론 밀도의 약 73%인 SiC 직포/SiC 복합체의 최대곡강도는 300 MPa이고, 기지내 균열이 처음 발생하는 응력은 77 MPa였다. 인장강도는 곡강도의 1/3 정 도의 낮은 값을 나타내였고, 인장 시험중의 첫번째 기지 균열 응력 또한 곡강도 시험에서 얻은 값보다는 상당히 낮은 값을 보여주였다. 곡강도 물성에 비교하여 상대적으로 낮은 인장물성은 WeibuH 통계 처리 방법에 의하여 응력을 받고 있는 부피의 차로 정량적으로 해석하였다. 해석 결과, 직포가 충으로 배열된 복합체의 최대 인장강도는 응력을 받는 섬유의 길이에 의존하며, 기지내 균열이 생기는 첫번째 응력은 응력을 받는 부피에 의해 결정됨을 보여주었다. SiC 휘스 커를 기지에 보장함으로써 복합체의 기지파괴 strain을 향상시키는 이유로, 첫번째 기지 균일 응력이 증가됨을 확인하였다.