• Journal of Astronomy and Space Sciences
• /
• 제39권4호
• /
• pp.159-167
• /
• 2022

Because of the small number of spacecraft available in the Earth's magnetosphere at any given time, it is not possible to obtain direct measurements of the fundamental quantities, such as the magnetic field and plasma density, with a spatial coverage necessary for studying, global magnetospheric phenomena. In such cases, empirical as well as physics-based models are proven to be extremely valuable. This requires not only having high fidelity and high accuracy models, but also knowing the weakness and strength of such models. In this study, we assess the accuracy of the widely used Tsyganenko magnetic field models, T96, T01, and T04, by comparing the calculated magnetic field with the ones measured in-situ by the GOES satellites during geomagnetically disturbed times. We first set the baseline accuracy of the models from a data-model comparison during the intervals of geomagnetically quiet times. During quiet times, we find that all three models exhibit a systematic error of about 10% in the magnetic field magnitude, while the error in the field vector direction is on average less than 1%. We then assess the model accuracy by a data-model comparison during twelve geomagnetic storm events. We find that the errors in both the magnitude and the direction are well maintained at the quiet-time level throughout the storm phase, except during the main phase of the storms in which the largest error can reach 15% on average, and exceed well over 70% in the worst case. Interestingly, the largest error occurs not at the Dst minimum but 2-3 hours before the minimum. Finally, the T96 model has consistently underperformed compared to the other models, likely due to the lack of computation for the effects of ring current. However, the T96 and T01 models are accurate enough for most of the time except for highly disturbed periods.

• 정보보호학회논문지
• /
• 제19권2호
• /
• pp.49-61
• /
• 2009

유한체 연산중에서 곱셈 연산은 중요한 연산중 하나이다. 또한, 최근에 Fan과 Dai는 이진체 곱셈기의 효율성을 개선하기 위하여 Shifted Polynomial Basis(SPB)와 이를 이용한 non-pipeline 비트-병렬 곱셈기를 제안하였다. 본 논문에서는 삼항 기약다항식 $x^{n}+x^{k}+1$에 의하여 정의된 $F_{2^n}$ 위에서의 새로운 SPB 곱셈기 type I과 type II를 제안한다. 제안하는 type I 곱셈기는 기존의 SPB 곱셈기에 비하여 시간 및 공간 복잡도면에서 모두 효율적이다. 그리고 type II 곱셈기는 제안하는 type I 곱셈기를 포함하여 기존의 모든 결과보다 작은 공간 복잡도를 가진다. 그러나 type II 곱셈기의 시간 복잡도는 n과 k에 따라 최대 1 XOR time-delay 증가한다.

• 정보보호학회논문지
• /
• 제5권1호
• /
• pp.17-24
• /
• 1995

타원 곡선을 사용한 암호 시스템은 안전도가 높고 smart card에 응용할 수 있지만 타원 곡선에서의 연산이 유한체에서의 연산보다 느리기 때문에 실용화를 위해서는 타원 곡선위에서 고속 연산 기법, 고속 반복 연산 기법이 개발되어야 한다. 1991년 Koblitz는 Frobenious map의 trace Tr(${\varphi}$)가 1인 anomalous 타원 곡선을 제안하였고, 이 곡선의 사용으로 타원 곡선위의 한 점 P를 반복 더하는 mP를 효과적으로 계산할 수 있었다. 본 논문에서는 사전 계산을 할 경우 Koblitz의 $F_2$ 위에서의 anomalous 타원 곡선과 같이 보통의 반복 연산 방법(repeated-doubling method)보다 3배 빨리 mP를 계산할 수 있는 유한체 $F_4$위에서 정의된 타원 곡선을 제안한다. 사전 계산을 하지 않는 경우 제안된 타원곡선 위에서는 mP 계산시 가장 많은 더하기 횟수는 ${\frac{3}{2}}log_2m$+1번이다.

• 한국안전학회지
• /
• 제35권6호
• /
• pp.25-31
• /
• 2020

Boiling Liquid Expanding Vapor Explosion(BLEVE) can cause not only economic damage to the plant but also serious casualties. LPG accidents account for 89.6 percent of all accidents caused by gas leaks in Korea over the past nine years, while casualties from accidents also account for 73 percent of all accidents, according to statistics from the Korea Gas Safety Corporation. In addition, a potential explosion and a fire accident from one LPG storage tank may affect the nearby storage tanks, causing secondary and tertiary damage (domino effect). The safety distance standards for LPG used by LPG workplaces, charging stations, and homes in Korea have become stricter following the explosion of LPG charging stations in Bucheon. The safety distance regulation is divided into regulations based on the distance damage and the risk including frequency. This study suggests two approaches to optimizing the safety distance based on the just consequence and risk including frequencies. Using the Phast 7.2 Risk Assessment software by DNV GL, the explosion overpressure and heat radiation were derived according to the distance caused by BLEVE in the worst-case scenario, and accident and damage probability were derived by considering the probit function and domino effect. In addition, the safety distance between LPG tanks or LPG charging stations was derived to minimize damage effects by utilizing these measures.

• 대한원격탐사학회지
• /
• 제36권6_2호
• /
• pp.1551-1565
• /
• 2020

On April 4, 2019, a forest fire started in Goseong County and lasted for three days, burning the neighboring areas of Sokcho. The strong winds moved the blaze from one region to another region and declared the worst wildfire in South Korea in years. More than 1,880 facilities, including 400 homes, were burnt down. The fire burned a total area of 529 hectares (1,307 acres), which involved 13,000 rescuers and 16,500 military troops to control the fire occurrence. Thousands of people were evacuated, and two people are dead. This study generated post-wildfire maps to provide necessary data for evacuation and mitigation planning to respond to this destructive wildfire, also prevent further damage and restore the area affected by the wildfire. This study used KOMPSAT-3A and Sentinel-2 imagery to map the post-wildfire condition. The SVM showed higher accuracy (overall accuracy 95.29%) compared with ANN (overall accuracy of 94.61%) for the KOMPSAT-3A. Moreover, for Sentinel-2, the SVM attained a higher accuracy (overall accuracy of 91.52%) than the ANN algorithm (overall accuracy 90.11%). In total, four post-wildfire burned area maps were generated; these results can be used to assess the area affected by the Sokcho wildfire and wildfire mitigation planning in the future.

• 한국안전학회지
• /
• 제36권4호
• /
• pp.71-79
• /
• 2021

In this study, a real-scale fuel-cell room of volume 1.36 m³ is constructed to confirm the explosion characteristics of hydrogen-air mixture gas in a hydrogen-powered house. A volume concentration of 40% is applied in the fuel-cell room as the worst-case scenario to examine the most severe accident possible, and two types of doors (made of plastic sheet and wood) are fabricated to observe their effects on the overpressure and impulse. The peak overpressure and impulse based on distance from the ignition source are experimentally observed and assessed. The maximum and minimum overpressures with a plastic-sheet door are about 20 and 6.7 kPa and those with a wooden door are about 46 and 13 kPa at distances of 1 and 5 m from the ignition source, respectively. The ranges of impulses for distances of 1-5 m from the ignition source are about 82-28 Pa·s with a plastic-sheet door and 101-28 Pa·s with a wooden door. The amount of damage to people, buildings, and property due to the peak overpressure and impulse is presented to determine the safe distance; accordingly, the safe distance to prevent harm to humans is about 5 m based on the 'injuries' class, but the structural damage was not serious.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.84-96
• /
• 2022

In the worst case, a temporary ignition source (also known as transient combustibles) between two electrical panels can damage both panels. Mitigation strategies for electrical panel fires were previously developed using fire modeling and risk analysis. However, since they do not comply with deterministic fire protection requirements, it is necessary to analyze the boundary values at which combustibles may damage targets depending on various factors. In the present study, a sensitivity analysis of input variables related to the damage threshold of two electrical panels was performed for dimensionless geometry using a Fire Dynamics Simulator (FDS). A new methodology using a damage evaluation map was developed to assess the damage of the electrical panel. The input variables were the distance between the electrical panels, the vertical height of the fuel, the size of the fire, the wind speed and the wind direction. The heat flux was determined to increase as the vertical distance between the fuel and the panel decreased, and the largest heat flux was predicted when the vertical separation distance divided by one half flame length was 0.3-0.5. As the distance between the panels increases, the heat flux decreases according to the power law, and damage can be avoided when the distance between the fuel and the panel is twice the length of the panel. When the wind direction is east and south, to avoid damage to the electrical panel the distance must be increased by 1.5 times compared to no wind. The present scale model can be applied to any configuration where combustibles are located between two electrical panels, and can provide useful guidance for the design of redundant electrical panels.

• 수완나부미
• /
• 제12권2호
• /
• pp.53-80
• /
• 2020

Students of global development are often introduced to Southeast Asia by reading many of the influential authors whose ideas were derived from their experiences in the region. John Furnivall, Clifford Geertz, Benedict Anderson and James Scott have made Southeast Asia relevant to comprehending developments far beyond the region. It might even be added that others come to the region because it has also been the home to many key historical events and seminal social developments. However, when many of the best-known writings (and textbooks) of global history are examined, treatment of Southeast Asia is often scarce and in the worst cases non-existent. It is within this context that this paper will examine Southeast Asia's role in the interpretation of global history. The paper will consider the 'global history' as a historical production in order to depict the ways in which the construction of global narratives can be a reflection of the immediate needs of historians. Furthermore, the discussion will be historiographic, exhibiting the manner in which key global histories portrayed the significance of the region. Particular importance will be placed on the ways in which the region is used to present larger historical trajectories. Additionally, the paper will consider instances when Southeast Asia is either profoundly underrepresented in global narratives or misrepresented by global historians. Last, since the discussion will probe the nature of 'global history', it will also consider what the subject might look like from a Southeast Asian point of view. The paper will end by exploring the ways in which the region's history might be augmented to become visible to those who live outside or have little knowledge about it. Visual augmented reality offers great potential in many areas of education, training and heritage preservation. To draw upon augmented reality as a basic metaphor for enquiry (and methodology) means asking a different kind of question: how can a region be "augmented" to become (at least in this case) more prominent. That is, how can the region's nations, histories and cultures become augmented so that they can become the center of historical global narratives in their own right. Or, to put this in more familiar terms, how can the "autonomous voices" associated with the region make themselves heard?

• 창의정보문화연구
• /
• 제6권1호
• /
• pp.41-48
• /
• 2020

공간 데이터를 표현하고 처리하기 위해 사분트리 또는 이분트리 등의 계층형 자료 구조가 사용되고 있다. 이분 트리를 선형적으로 표현하기 위해 기존에 제안된 S-트리는 이진 영역 이미지 데이터를 선형적인 이진 비트열로 표현하여 저장 공간을 크게 압축할 수 있는 장점이 있으나, 이미지의 해상도가 높아질수록 이진 비트열의 길이가 길어져 저장 공간이 늘어나고 탐색 성능이 저하되는 문제점이 발생한다. 본 논문에서는 포화 이진 트리 구조를 갖는 여러 개의 분할 이분트리를 계층적으로 구성하고 각 분할 이분트리를 2개의 선형적 이진 비트열로 표현하여 이미지 탐색에 필요한 범위를 축소하는 한편 이진 비트열 경로를 직접 탐색하지 않고 간단한 숫자 변환을 통해 수행하도록 하여 전체적인 탐색 성능을 개선하였다. 최악의 시공간 복잡도 분석에 의한 성능 평가를 통해 제안 방법이 기존의 방법에 비해 우수한 검색 성능과 공간 효율성을 보이는 것으로 분석되었다.

• 대한토목학회논문집
• /
• 제28권6D호
• /
• pp.801-807
• /
• 2008

본 연구는 시간-면적 방법론을 적용하여 도시교통수단의 토지소모 효율성을 비교분석하고자 하였다. 도시의 주요 교통수단을 대상으로 그간의 연구와 달리 각 수단에 적합한 교통조건과 운행여건을 고려한 토지소모효율성 산정식을 도출하였고, 도출된 식을 이용하여 각 수단별 1km 통행시의 인당 시간-면적 소모량을 계산하여 비교하였다. 또한 산정식을 이용하여 소모량과 운행속도와의 관계를 분석하여 각 수단의 소모량의 범위를 비교하였으며, 주차에 의한 시간-면적 소모량을 명확히 제시하기 위해 외곽으로부터 도심으로 통행하는 통근자의 가상 왕복통행을 가정하여 수단별 통행에 따른 총 시간-면적소모량을 비교분석하였다. 연구의 결과, 이용시설에 상관없이 승용차 이용자가 가장 소모량이 많은 것으로 나타났고, 도시철도를 포함한 대중교통수단의 효율성이 우수한 것으로 나타났다. 예상과는 달리 도보와 자전거는 높은 소모량을 보였다. 그럼에도 불구하고 단거리 통행시 버스를 대체할 수 있는 수단으로 나타났다.