• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.8
• /
• pp.462-470
• /
• 2003

This paper presents an algorithm of identifying parametric uncertainty by way of an interval model. For a given set of frequency response data from an uncertain linear SISO system of which the upper and the lower bounds of both magnitude and phase responses are represented, the proposed algorithm consists of two main parts: first, the nominal model is identified by using Least Square Estimation (LSE), and then an interval model is constructed by expanding the extremal properties of interval systems, so that tightly enclose the given envelopes within those of interval model. Two numerical examples are given to demonstrate and verify the developed algorithm. The identified interval model can be used for evaluating the worst case performance and stability margins against parametric uncertainty by using some extremal properties on interval systems.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.1976-1978
• /
• 2001

In this paper, a new robust deadbeat minimax FIR filter (DMFF) is proposed for continuous-time state space signal models. Linearity, deadbeat property, FIR structure, and independence of the initial state information will be required in advance, in addition to a performance index of the worst case gain between the disturbance and the current estimation error. The proposed DMFF is obtained by directly minimizing a performance index with the deadbeat constraint. The proposed DMFF is represented first in a standard FIR form and then in an iterative form. The DMFF will be shown to be used also for the IIR structure. It is shown that the DMFF is similar in form to the existing receding horizon unbiased FIR filter (RHUFF) with some noise covariances. The former is a deterministic filter, while the latter is a stochastic filter.

• Journal of Environmental Health Sciences
• /
• v.33 no.1 s.94
• /
• pp.30-35
• /
• 2007

Waste policies with waste metering system and recycling in 1995 have contributed to the reduction of solid waste generation. Now rural areas as well as urban areas produce less amount of solid wastes in terms of per capita. However most policies in relation to waste issue have been concentrated in urban areas. Large portion of agricultural waste in rural region are being illegally treated such as open incineration or burned out on the road. In this study, we assessed the atmospheric air quality and health risk by illegal open incineration in rural region. In case of benzene level, worst concentration during illegal open incineration was 0.23 ppm and cancer risk by exposure was estimated to $2.29{\times}10^{-3}$.

• Journal of the Korean Society of Safety
• /
• v.11 no.3
• /
• pp.25-32
• /
• 1996

This study is a survey on the effect of working security and worksite environment connected to the worst case of noise and dust which was generated in the manufacturing workshop of machinery and easting. The noise intensity of the manufacturing process tends to increase up to the limited strength of 90db (A) or the higher during the last 4~5 years in 1990~1994. This result requires a significant improvement of worksite environment of unit workshop. The concentration of dust in the gouging process tends to increase to a significantly high level compared with other worksite, which also requires a local ventilation method to reduce the dust diffusion. Organic solvents used most frequently in the manufacturing process machinery were the aromatic hydrocarbons, but were gradually diversed in recent years.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.958-964
• /
• 1999

The distance in load parameter space to the closest saddle node bifurcation (CSNB) point provides the worst case power margin to voltage instability and the left eigenvector at CSNB identifies the most effective direction to steer the system to maximize voltage stability under contingency. This paper presents an improved direct method for computing CSNB: the order of nonlinear systems equations is reduced to about twice of the size of load flow equations in contrast to about three-times in Dobson's direct method; the initial guess for the direct method is computed efficiently and robustly by combined use of continuation power flow, a pair of multiple load flow solution with Lagrange interpolation. It is also shown that voltage stability may be enhanced significantly with shift of generations in the direction of the left eigenvector at CSNB.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.5
• /
• pp.848-860
• /
• 1994

Generally, to get the minimum distance between two arbitrary shapes that are composed of circular arcs and lines, we must calculate distances for all the possible pairs of the components from two given shapes. In this paper, we propose an efficient method for the minimum distance problem between two shapes by using their structural features after extracting the reduced component lists which are essential to calculate the minimum distance considering the relationship of shape location. Even though the reduced component lists may contain all the components of the shapes in the worst case, in the average we can reduce the required computation much by using the reduced component lists. This method may be efectively applied to calculating the minimum distance between two shapes which are generated by the CAD tool, like in the nesting system.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.4 s.22
• /
• pp.53-60
• /
• 2006

Quality control and safety represent increasingly important concerns for project managers. In the worst case, failures may cause personal injuries or fatalities. Accidents during the construction process can similarly result in personal injuries and large costs. We present the results of a study designed to identify the tools that are most widely used and those that are associated with successful project management in general, and with effective project risk management in particular. The study is based on a questionnaire administered to a sample of project managers from construction enterprises. The response data was analyzed in order to find which tools are more likely to be used in the those organizations that report better project management performance and in those that value the contribution of risk management processes.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.3
• /
• pp.258-263
• /
• 2011

We study on a generalization of the two dimensional linear programming knapsack problem with the extended GUB constraint, which was presented in paper Won(2001). We identify some new parametric properties of the generalized problem and derive a solution algorithm based on the identified parametric properties. The solution algorithm has a worst case time complexity of order O($n^2logn$), where n is the total number of variables. We illustrate a numerical example.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.4
• /
• pp.396-403
• /
• 2014

The multi-divisional knapsack problem is defined as a binary knapsack problem where each mutually exclusive division has its own capacity. In this paper, we present an extension of the multi-divisional knapsack problem that has generalized multiple-choice constraints. We explore the linear programming relaxation (P) of this extended problem and identify some properties of problem (P). Then, we develop a transformation which converts the problem (P) into an LP knapsack problem and derive the optimal solutions of problem (P) from those of the converted LP knapsack problem. The solution procedures have a worst case computational complexity of order $O(n^2{\log}\;n)$, where n is the total number of variables. We illustrate a numerical example and discuss some variations of problem (P).

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.367-368
• /
• 2014

This paper investigates characteristics of high power semiconductor device losses in 5MW-class Permanent Magnet Synchronous Generator (PMSG) Medium Voltage (MV) wind turbines. High power semiconductor device of press-pack type IGCT of 6.5kV is considered in this paper. Analysis is performed based on neutral point clamped (NPC) 3-level back-to-back type voltage source converter (VSC) supplied from grid voltage of 4160V. This paper describes total loss distribution at worst case under inverter and rectifier operating mode for the power semiconductor switches. The loss analysis is confirmed through PLECS simulations. In addition, the loss factors due to di/dt snubber and ac input filter are presented. The investigation result shows that IGCT type semiconductor devices generate the total efficiency of 97.74% under the rated condition.