• 한국정밀공학회지
• /
• 제17권3호
• /
• pp.114-121
• /
• 2000

A new concept drill was developed recently (or increasing accuracy and productivity in drilling operation. The burr formation in drilling causes many problems in deburring operation because burrs are formed inside holes and it is difficult to remove them. Burr formations are observed in drilling operation with a new concept drill and are compared with conventional HSS drill. Several workpieces with different materials are drilled with several cutting conditions, velocity and feed rate. The burr in drilling can be classified into three types according to the location of crack. To observe the burr formation mechanism, the cap which is formed with the new concept drill is observed and measured.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.407-410
• /
• 1995

Many researches on measurement technology has been made and developed by various methods. Considering the measurement environment with cutting fluid, coolant and the like, contact type measurement methods are mostly used. But contact measurement method has measuring force and so the sensing head becomes worn. By these reasons, we considered sensors not influenced by the former fluid and so can acquire accrate measured values using error compensation due to temperature and vibration. For this purpose, eddy current sensors and Extended kalman Filter Algorithm for processing measured data has been used. In this paper, we present new technology that can be used for measuring workpiece with previous bad environment using direct method and comparison measurement method. We used cylindrical workpieces which were produced by grinding machine for the target.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.280-283
• /
• 1995

In centrifugal barrel finishing, it is easy to establish the optimum working conditions for different workpieces. As they are adjusted in trial and error practically, production efficiency and quality are some- times low In the present paper, firstly, installation of the barrel finishing machine, finishing purpose and working conditions have been analyzed in order to eliminate the defects of the finished surface. Secondly, on the basis of this result, quantity of the water and selection of the media and the compound, etc. have been investigated. As a result, production efficiency and quality have been improved under the specified optimum working conditions. In addition, durability of the media and the compound has been tested experimentally. As a result, it was found that the expected life of the media is about 85 hrs and that of the compound is about 5 hrs. Besides high quality control has been achieved by newly proposed inspection at regular intervals.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.254-262
• /
• 2008

The objective of the proposed study is to produce a tool-condition monitoring (TCM) strategy that will lead to a more efficient and economical drilling tool usage. Drill-wear monitoring is an important attribute in the automatic cutting processes as it can help preventing damages of the tools and workpieces and optimizing the tool usage. This study presents the architectures of a multi-layer feed-forward neural network with back-propagation training algorithm for the monitoring of drill wear. The input features to the neural networks were extracted from the AE signals using the wavelet transform analysis. Training and testing were performed under a moderate range of cutting conditions in the dry drilling of steel plates. The results indicated that the extracted input features from AE signals to the supervised neural networks were effective for drill wear monitoring and the output of the neural networks could be utilized for the tool life management planning.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.656-659
• /
• 1996

An universal NURBS interpolation for an open architectured CNC controller is proposed in order to unify internal data structure and algorithm of different interpolations such as linear, circular and spline, and to intelligently interface CAD database of the various workpiece contour. Furthermore, NURBS interpolation may result in better surface roughness and high speed machining due to the continuous generation of cutter movement. The mathematical manipulation of NURBS is presented and the practical implementation on the CNC controller of a lathe is discussed for real machining. The comparison between a computer design and workpieces machined on a lathe shows the feasibility of the NURBS interpolation format as an universal interpolation scheme.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.656-662
• /
• 2008

A cost-function based on manipulability and compatibility is designed to determine assembly motions of two cooperating manipulators. Assembly motions are planned along the direction maximizing performance indices to improve control performance of the two manipulators. This paper proposes bimanual task compatibility by defining cost functions. The proposed cost functions are applied and compared to the bimanual assembly task. The problem is formulated as a constrained optimization considering assembly constraints, position of the workpieces, and kinematics and redundancy of the bimanual robot. The proposed approach is evaluated with simulation of a peg-in-hole assembly with an L-shaped peg and two 3-dof manipulators.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.58-64
• /
• 2002

Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of the grinding wheel in the in-feed machining method. In this study, some finding experiments by the rotary surface grinding machine with straight type wheels were conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametrical silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpieces are varied, and grinding machine used in this experiment is rotary type surface grinding m/c equipment with an ELID unit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2~6 nm in Ra.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.26-31
• /
• 2002

In this study an experimental investigation was conducted to find the grinding characteristics of ceramics, STD11 and STS304 materials. The grinding force and the microscopic observation of the workpieces were obtained in surface grinding. Grinding characteristics of ceramics were inspected through the microscopic examination the cutting force, and the surface roughness. It has been found that the finding force of ceramics is relatively low as compared to that of steels and that CBN wheel has an excellent performance. The surface roughness was measured according to the feedrate and the depth of out.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.895-898
• /
• 2001

This paper presents an optimization cutting speed(OCS) program developed to improve the machining precision and tool life in high speed machining using ball end milling. This program optimized the cutting speed that is changing at any time in free surface machining of an automobile part like a connecting load die. The technique of optimization cutting speed makes the CAD/CAM-generated NC code go through a reverse post process, conducts cutting simulation, and obtain the effective tool diameter of the ball end milling. Then it changes the spindle revolution to within the range of critical cutting speed fit for the material of the workpieces depending upon the effective tool diameter. In this study, the machining precision and tool life were compared for the two connecting load dies processed using the general cutting method and the proposed optimization cutting speed technique, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.203-206
• /
• 2001

This paper presents a straightness measurement system for flat and long workpieces. The measurement system consists of a laser optical unit, a CCD camera and processing system, and a carrier system with a stylus. The carrier system accompanies the stylus, which displaces a retroreflector along the surface profile. The optical unit is used to optically amplify the displacement of retroreflector. The CCD camera and processing system finally identifies the vertical displacement of the stylus unit. The developed system is applied to two surfaces: ground surface and LM guide surface. The experimental results show that the developed system can measure the straightness of flat surfaces within sub-micron error.