• 대한건축학회논문집:구조계
• /
• 제36권2호
• /
• pp.127-136
• /
• 2020

Prism compressive strength is the most influential parameter to evaluate the seismic performance of non-structural concrete brick masonry walls, and is affected by the practice and workmanship of masonry workers. This study experimentally investigates the influence of workmanship on prism compressive strength throughout the compressive test with prism specimens constructed according to masonry workmanship. To do this, the workmanship is categorized into good, fair, and poor conditions which are statistically evaluated with thickness and indentation depth of bed-joints. Then, the effect of workmanship on the structural properties of masonry prisms is evaluated by investigating relations between properties such as their compressive strength, elastic modulus and numerical parameters such as thickness, filling of bed-joints. This study demonstrates that the indentation depth is more important parameter for structural properties of masonry prisms and masonry prisms with loss in bed-joint area less than of 7% can be in fair condition.

• Steel and Composite Structures
• /
• 제5권2_3호
• /
• pp.169-180
• /
• 2005

Current codes of practice do not exist in isolation, and rules that have been developed assume certain material properties and minimum workmanship in fabrication and erection. These are either in separate documents or different parts of the code. This paper explains the main requirements for materials and workmanship and how they can be related to design and construction in general. The use of very high strength steels is also considered and the measures that may be needed to allow their use with modern codes are also presented.

• 한국게임학회 논문지
• /
• 제12권6호
• /
• pp.71-82
• /
• 2012

글로벌 환경 속에서 기업의 경쟁력을 갖는 요인으로는 우수한 인재를 확보하는 것이 매우 중요하다. 특히, 과거의 제조 산업이 발달했던 시기와는 달리 지식서비스 산업이 발달한 오늘날에는 우수인재의 확보가 기업의 성공과 실패를 결정하는 매우 중요한 요소가 되고 있다. 이에 따라, 기업은 인재채용에 많은 돈을 투자하고 있으며 인재의 훈련, 관리, 평가 등 전주기적인 측면에서 체계적으로 인재를 관리하고 있다. 본 연구는 '인재채용 기능성 게임' 개발에 관한 연구로 기업에서 필요로 하는 인재선발과 관련한 미션을 일정기간동안 수행 후 정량, 정성적 평가를 통해 실제 면접과 취업의 기회가 주어지는 독특한 특징을 갖는 게임을 제안한다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1997년도 특별강연 및 추계학술발표 개요집
• /
• pp.198-201
• /
• 1997

• Structural Engineering and Mechanics
• /
• 제58권1호
• /
• pp.121-142
• /
• 2016

The national standard being used in Turkey for suspended ceiling systems (SCS) regulates material and dimensional properties but does not contain regulations regarding installation instructions which cause substandard applications of SCSs in practice. The lack of installation instructions would potentially affect the dynamic performance of these systems. Also, the vast majority of these systems are manufactured using substandard low-quality materials, and this will inevitably increase SCS related damages during earthquakes. The experimental work presented here focuses on the issue of dynamic performance of SCSs with different types of carrier systems (lay-on and clip-in systems), different weight conditions, and material-workmanship qualities. Moreover, the effects of auxiliary fastening elements, so called seismic perimeter clips, in improving the dynamic performance of SCSs were experimentally investigated. Results show that clip-in ceiling system performs better than lay-on system regardless of material and workmanship qualities. On the other hand, the quality aspect becomes the most important parameter in affecting the dynamic performance of lay-on type systems as opposed to tile weights and usage of perimeter clips. When high quality system is used, tile weight does not change the performance of lay-on system, however in poor quality system, tile weight becomes an important factor where heavier tiles considerably decrease the performance level. Perimeter clips marginally increase the dynamic performance of lay-on ceiling system, but it has no effect on the clip-in ceiling system under the shaking levels considered.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.977-982
• /
• 2012

In order to find out partial discharge (PD) phenomena in the cable joint due to the poor workmanship during the installation, the relationship between PD inception voltages and joint defects was investigated. For the purpose, in the joint of 22.9kV CNCV cables, electric fields were calculated for various semiconductive layer wrong positioning (WP) defects. And, PDIV were investigated through the experiments and compared with the results of electric field analysis. In all WP defect cases, the PD inception field calculated using measured PDIVs was similarly shown to be the average value of 1.84kV/mm. In addition, the calculated PDIV and the measured PDIV were almost equal, from the PDIV calculation using maximum electric fields and the measured PDIV for the normal case. Throughout this study, it is possible to analyze WP defects due to the poor workmanship and to establish better joint design for the distribution grade extruded cable system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.979-984
• /
• 2001

Poor water-proofing integrity is related to many factors : site procedure, workmanship, weather. substrate conditions, installation(including asphalt application) conditions. The evaluation of adhesive properties tested by concrete surface moisture and asphalt application was based on laboratory test and observations. This report describes the pull-off test results of waterproofing systems currently used for installing and reparing for concrete bridge decks. The test results showed that the moisture condition fully affected the adhesive properties of sheet membranes and sealer but partially for liquid membranes.

• 셀메드
• /
• 제7권4호
• /
• pp.17.1-17.3
• /
• 2017

Ayurveda is gradually getting more acceptances in the world. The fact is visible through increasing number of Ayurveda articles in leading medical journals and also through the chapters on Ayurveda in various biomedical publications. Although the world is now looking up at the authentic information about Ayurveda, the status of Ayurveda publishing in India is not very promising. Poor workmanship while preparing the articles on Ayurveda and non professional approaches in publishing are the reasons of the poor show and this requires to be seriously taken up.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권2호
• /
• pp.1-8
• /
• 1993

The cases and the treatments of the rotational speed losses of marine propellers are examined and practical modification methods are discussed. The cutting of the propeller diameter, the modification of propeller pitch and the propeller blade edge modification are briefly reviewed. An example for the propeller blade edge modification, which is regarded to have advantages in cost and workmanship, is presented for a propeller of a large ship.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.551-556
• /
• 1997

Concrete can be defective for several reasons, including inadequate design, material selection or workmanship. Concrete and also dsteriorate or be damaged in use. Consequently existing reinforced concrete may not be functioning as originally intended and designed. So, the evaluate process to investigate initial crack is very important. It is the aim of this study to development and application for diagnosis method on the crack broker out of new constructions.