• 한국도서관정보학회지
• /
• 제42권4호
• /
• pp.243-262
• /
• 2011

이 연구는 근골격계 질환의 발생에 영향을 미칠 것으로 예상되는 요인들에 대해 20개 대학도서관 300명(266명 응답)의 사서들을 대상으로 설문조사를 실시하여 그 결과를 분석하였다. 응답자의 62.5%가 근골격계 질환 자각증상을 호소하였다. 근골격계 증상의 요인들을 분석한 후, 각 부위별로 유의미한 영향을 미치는 주요 요인들을 독립변수로 하여 다중회귀분석을 한 결과는 아래와 같다. 즉, 목의 증상에 영향을 미치는 변수는 근무조건 만족도였으며, 근무 만족도가 높을수록 목 부위의 증상 정도가 낮은 것으로 나타났다. 어깨부위의 증상에 대해서는 근무만족도, 작업강도, 식사시간이 설명변수로 선택되었다. 식사시간이 불규칙적일수록, 작업강도가 높을수록, 근무만족도가 낮을수록 증상의 정도가 높은 것으로 나타났으며, 이중에서도 특히 근무 만족도의 영향이 큰 것으로 나타났다. 팔 팔꿈치에서는 숙련도가 설명변수로 선택되었으며, 업무 숙련도가 높을수록 증상 정도가 높게 나타났다. 손가락 손목을 설명해주는 설명변수로는 업무 스트레스가 선택되었으며, 업무 스트레스가 많을수록 증상 정도가 높은 것으로 나타났다. 등 허리에서는 작업강도, 직장 만족도가 설명변수로 선택되었고, 작업강도가 높을수록, 직장 만족도가 낮을수록 증상이 높은 것으로 나타났다. 마지막으로 무릎 다리의 경우 흡연여부가 선택되었으며 비흡연자일수록 증상이 낮은 것으로 나타났다.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.2-7
• /
• 2009

This paper reviews evolution of the research networks on intense laser science under international and Asian frameworks during 2000 to 2008. The OECD Global Science Forum Steering Committee on Compact, High-Intensity Short-Pulse Lasers led to the establishment of the International Union of Pure and Applied Physics (IUPAP) Working Group: International Committee on Ultrahigh Intensity Lasers (ICUIL) and the Asian Intense Laser Network (AILN) in 2004. Through various activities under AILN such as the Asian Symposium on Intense Laser Science (ASILS), the Asian Summer School on Laser Plasma Acceleration and Radiation, and the High-Order Harmonics Workshops, closer relations are being formed among the scientists and also among the young generations working in intense laser science in the Asian regions.

• Journal of Korean Neurosurgical Society
• /
• 제64권4호
• /
• pp.644-664
• /
• 2021

Objective : Since the enactment of the Special Act on Korean Medical Residents, neurosurgeons working at training hospitals have been performing the duties of residents, in addition to their existing patient care responsibilities, which include surgery, education, and research. This study explores the relationships between work intensity, work-life balance, and burnout experienced by Korean neurosurgeons. Methods : The participants (n=451) were neurosurgeons working at training hospitals throughout Republic of Korea. Data on socio-demographic characteristics (including objective and subjective work environment), work intensity, work-life balance, and burnout were gathered using self-report questionnaires completed between March 1 and December 20, 2019. The data were analyzed using descriptive statistics, independent samples t-tests, one-way analysis of variance, Pearson's correlations, and multiple regression analysis. IBM SPSS Statistics for Windows, version 25 (IBM Corp., Armonk, NY, USA) was used for the analyses. Results : The work intensity, work-life balance, and burnout levels of neurosurgeons were 3.95, 3.57 (on a scale from 1 to 5) and 4.60 (on a scale from 1 to 7); and 280 (62.1%) of 451 neurosurgeons were found to be experiencing burnout. By controlling for the socio-demographic characteristics, the effects of work intensity and work-life balance on burnout were analyzed. Work intensity (B=0.314), work-life balance-family and leisure (B=0.216), work-life balance-growth (B=0.147), job stress (B=0.133), and satisfaction with human relationships (B=-0.069) were shown to be significant (all p<0.05), and they were found to affect burnout in the abovementioned order. The overall explanatory power was 58.3% (p<0.05), and the explanatory power with the addition of independent variables such as work intensity and work-life balance was 14.5% (p<0.05). Conclusion : This study showed that Korean neurosurgeons working at training hospitals experienced a high level of work intensity and job stress, and low work-life balance. Additionally, nearly half of the neurosurgeons were found to experience burnout related to factors such as work intensity, work-life balance, job stress, and satisfaction with human relationships. In particular, these factors seem to have deteriorated further after the implementation of the Special Act on Korean Medical Residents. These very high levels of burnout among Korean neurosurgeons who care for patients with both brain and spinal diseases may have a very important impact on patients' health. Therefore, it is recommended that the Korean Neurosurgical Society and the Korean government make efforts to improve the factors that affect burnout among Korean neurosurgeons.

• Structural Engineering and Mechanics
• /
• 제70권4호
• /
• pp.479-497
• /
• 2019

In the current code design, the use of a uniform internal pressure coefficient of cooling towers as internal suction cannot reflect the 3D characteristics of flow field inside the tower body with different ventilation rate of shutters. Moreover, extreme weather such as heavy rain also has a direct impact on aerodynamic force on the internal surface and changes the turbulence effect of pulsating wind. In this study, the world's tallest cooling tower under construction, which stands 210m, is taken as the research object. The algorithm for two-way coupling between wind and rain is adopted. Simulation of wind field and raindrops is performed iteratively using continuous phase and discrete phase models, respectively, under the general principles of computational fluid dynamics (CFD). Firstly, the rule of influence of 9 combinations of wind speed and rainfall intensity on the volume of wind-driven rain, additional action force of raindrops and equivalent internal pressure coefficient of the tower body is analyzed. The combination of wind velocity and rainfall intensity that is most unfavorable to the cooling tower in terms of distribution of internal pressure coefficient is identified. On this basis, the wind/rain loads, distribution of aerodynamic force and working mechanism of internal pressures of the cooling tower under the most unfavorable working condition are compared between the four ventilation rates of shutters (0%, 15%, 30% and 100%). The results show that the amount of raindrops captured by the internal surface of the tower decreases as the wind velocity increases, and increases along with the rainfall intensity and ventilation rate of the shutters. The maximum value of rain-induced pressure coefficient is 0.013. The research findings lay the basis for determining the precise values of internal surface loads of cooling tower under extreme weather conditions.

• 산업경영시스템학회지
• /
• 제24권69호
• /
• pp.51-64
• /
• 2001

A laboratory experiment was conducted to investigate the effects of working posture. work/rest ration, and task type on the physical workload in automobile assembly jobs. Ten healthy male university students participated as subjects in the experiment. East subject performed 18 experimental session with combination of 3 working posture 3 work/rest ratio and 2 task types. To examine the effect of various working conditions on workload, DMG analysis was performed on 4 different muscles in the neck an arm area, Also RPE scale and heart rate were taken as response variables. The result showed that all working conditions considered in the experiment had significant effects on the workload concluding that labor intensity in auto assembly jobs should be adjusted with respect to different levels of working posture, work/rest ratio, and task type. Detailed analysis are presented in the paper.

• Annals of Occupational and Environmental Medicine
• /
• 제35권
• /
• pp.49.1-49.7
• /
• 2023

The Korean Working Conditions Survey (KWCS) is a state-approved statistical survey that has been conducted by the Occupational Safety and Health Research Institute (OSHRI) every 3 years since 2006 to monitor changes in the working conditions of Koreans. This cross-sectional national survey involves a sample of 50,000 employed people aged 15 or older. KWCS measures various working conditions through > 130 survey questions, including questions regarding working hours, labor intensity, work-life balance, degree of exposure to risk factors, and subjective health status. Professional survey interviewers visit households and conduct face to face interviews. KWCS provides data and statistics for occupational safety and health polices and research in Korea. Furthermore, OSHRI holds academic conferences every year, awards high-quality academic papers, and supports researchers using data. Microdata is publicly available through the OSHRI website (https://oshri.kosha.or.kr).

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.49-56
• /
• 1998

Super precision working technique and machine tool have been continually developed thanks to advanced electronic field. To obtain good result. it is necessary to investigate surface in grinding with $mu extrm{m}$ level. There were quite many researches to satisfy these demands by using non-contact methods through the computer vision. In this study, the texture of working surface was analyzed. co-occurrence matrices was obtained from the surface roughness. Texture parameter was obtained using position operator composed of $ heta$, d according to variation of angle direction and distance. As a result, it was found that surface texture was more affected by direction($\theta$) than distance(d).

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.316-322
• /
• 1998

Super precision working technique and machine tool have been developing continually thanks to advanced electronic field. To obtain good result. it is necessary to investigate surface state in grinding with ${\mu}{\textrm}{m}$ level. There were so many researches to satisfy these demands using non-contact methods through the computer vision. In this study, the texture of working surface was analyzed. cooccurrence matrice was obtained from the surface roughness. Texture parameter was obtained by means of position operator compose of $\theta$. d according to variation of angle direction and distance. As a result, it was found that surface texture was more effected by direction ($\theta$) then distance(d).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.585-590
• /
• 2001

Turbine blade is subject to torsional load by torsion-mount, centrifugal load by rotation of rotor and repeated bending load by steam pressure. Turbine with partially cracked blade has normal working condition at initial repair time but vibratory working condition at middle repair time due to crack growth. Finite element analysis on turbine blade indicates that repeated bending load out of all loads is the most important factor on fatigue strength of turbine blade. Therefore, this study shows root mean square roughness has linear relation with stress intensity factor range in 12% Cr steel and can predict loading condition of fractured turbine blade.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.170-177
• /
• 2001

Turbine blade is subject to torsional load by torsion-mount, centrifugal load by rotation of rotor and repeated bending load by steam pressure. Turbine with partially cracked blade has normal working condition at initial repair time but vibratory working condition at middle repair time due to crack growth. Finite element analysis on turbine blade indicates that repeated bending load out of all loads is the most important factor on fatigue strength of turbine blade. Therefore, this study shows root mean square roughness has linear relation with stress intensity factor range in 12% Cr steel and can predict loading condition of fractured turbine blade.