• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.573-582
• /
• 2007

Working spaces in the construction site are much more complicated than completed spaces in the building. There are many researches focus on partition of building spaces. However, few discussed partition sequencing in building construction sites. Space syntax is a set of techniques for analyzing spatial configurations. It has become a useful tool in a variety of researches. Partition sequencing of working spaces should be related to the working direction. However, with convex space and axial line, the partition sequencing became unrelated to the working direction. When critical space is blocked, the partition sequencing with axial line will be changed. It is significant to reveal the impact of the entire spatial structure when some of the working spaces are blocked. This paper discussed the improved partition sequencing theory and highlighted the importance of critical space and analyzed the spatial structure of working space. A real case project was demonstrated in this paper.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.88-94
• /
• 2000

For efficient operation, vital hand controls must be easily controlled by the operator from his or her normal working position. The primary working area based on the operator-perceived working comfort was developed to serve as a design guideline to the control panel layout. Six male and four female subjects voluntarily participated in the experiment in which working comfort was measured for two types of controls - knob and lever. The operator-perceived working comfort was examined for the frontal and sagittal distances from the body center and the slope of a work surface. The response surface methodology using a central composite design was employed to develop a prediction model for operator's working comfort on each type of controls. The proposed working areas based on the actual working comfort of an operator avoided the dichotomy that considers only the reachability of control devices, and showed a distinct shape, when compared to the existing normal working areas following the Farley's concept. It was shown that the distance from the body to control devices and the slope of a work surface have a quadratic relationship to the working comfort, and that the most comfortable area for seated tasks is located at the distance of about 2∼4 cm in the sagittal direction and about 42∼43 cm in the frontal direction from the shoulder, respectively. It was also found that the working comfort varies within the working area even at the positions with an equal distance from the body. It is expected that the isocomfort working area generated in the study will be used as a useful guideline for control panel layout.

• Korean Journal of Human Ecology
• /
• v.7 no.2
• /
• pp.81-96
• /
• 2004

The purpose of this study is to examme the foreign and korean child care service. and to provide the political proposal for employ of working wives and enhancement of home welfare. The political proposals for working wives are as follows ; Now societal recognition that all children are the responsibility of our society is needed to provide the good quality child care service. Our society should support the child care service to be provided a variety of service by child care staff. and should promote the administration and direction in child care center and service. Most of all. societal support, administration and direction should be the same in home-based care and center-based care.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.3
• /
• pp.20-25
• /
• 2003

The End-milling has been widely used in the industrial world because it is effective to cutting working with various shape. Recently the end-milling is demanded the high-precise technique with good surface roughness and rapid manufacturing time for precision machine and electronic elements. The cutting working of end-milling such as, cutting direction, revolution of spindle, feed rate and depth of cut have an effect on optimum surface roughness. This study was carried out to decide the working condition for optimum surface roughness and rapid manufacturing time by design of experiment and ANOVA. From the results of this study, the optimum working condition for end milling is upward cutting in cutting direction, 600rpm in revolution of spindle, 240mm/mm in feed rate, 2mm in axial depth of cut and 0 25mm in radial depth of cut. The design of experiment has become an useful method to select optimum working condition mend-milling.

• Korean Journal of Human Ecology
• /
• v.18 no.2
• /
• pp.407-418
• /
• 2009

In our modern society along with high speed economic growth and improvement of living conditions and through concentration of people in cities cars became essential necessities for people living in modern society. Due to social and economic conditions and for the need of recycling of materials and as a countermeasure for waste of materials importance of car service is stressed. In this connection need for improvement of working clothes which are suitable for safety and working efficiency in a difficult working environment is essential. However most of working clothes now being sold in the market are produced without consideration of ergonomic aspects of wearers of working clothes. For this reason there is need for basic research on development of working clothes which improve safety and comfort for working of car service workers. Accordingly in this study this author carried out research on fitness, level of satisfaction and dissatisfaction, suitability for movement and level of demand for improvement in working clothes with focus on workers at car service firms and direction for its improvement was explored. This study is intended to provide basic data for development of functional pattern of working clothes for car service workers in future.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.11
• /
• pp.1097-1104
• /
• 2008

Working condition is one of the most important factors in precision working. In this study, we optimized the vibration acceleration of working progress direction using RSM(response surface methodology) by table of orthogonal array. RSM was well adapted to make analytic model for minimizing vibration acceleration, created the objective function and saved a great deal of computational time. Therefore, it is expected that the proposed optimization procedure using RSM can be easily utilized to solve the optimization problem of working condition. The experimental results of the surface roughness and vibration acceleration showed the validity of the proposed working condition of side wall end-milling as it can be observed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.129-138
• /
• 2007

Recently, Direction Finding(DF) System is using switching DF algorithm to reduce system-weight by eliminating RF cable as much as possible. Also, Correlation Vector Direction Finding(CVDF) algorithms is being used for Fast Direction finding in tactical environment. In this paper, I will give you burst error elimination algorithms and compare the performance in case we use switching CVDF algorithm. Although antenna array is not working, we will successfully perform direction finding when we use this burst error elimination algorithms. Also, we will be completely capable of DF mission despite of meeting the unwanted situation that the monitoring signal disappear in case we use Switching Direction Finding algorithms. That situation frequently occurs under the Frequency Hopping signal circumstances.

• Tribology and Lubricants
• /
• v.26 no.6
• /
• pp.329-335
• /
• 2010

Recently, the End-milling processing is needed the high-precise technique to get a good surface roughness and rapid time in manufacturing of precision machine parts and electronic parts. The optimum surface roughness has an effect on end-milling working condition such as, cutting direction, spindle speed, feed rate and depth of cut, and so on. It needs to form the correlation of working conditions and surface roughness. Therefore this study was carried out to presume of surface roughness on end-milling working condition of Al7075 by regression analysis. The results was shown that the coefficient of determination($R^2$) of regression equation had a fine reliability of 87.5% and nonlinear regression equation of surface rough was made by multiple regression analysis.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.49-56
• /
• 1998

Super precision working technique and machine tool have been continually developed thanks to advanced electronic field. To obtain good result. it is necessary to investigate surface in grinding with $mu extrm{m}$ level. There were quite many researches to satisfy these demands by using non-contact methods through the computer vision. In this study, the texture of working surface was analyzed. co-occurrence matrices was obtained from the surface roughness. Texture parameter was obtained using position operator composed of $ heta$, d according to variation of angle direction and distance. As a result, it was found that surface texture was more affected by direction($\theta$) than distance(d).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.553-556
• /
• 2003

End-milling have been used in the industrial world because it is very effective to the manufacture of mechanical parts with various shape. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in aircraft, automobile part and molding industry. Therefore this study carried to decide the optimum cutting condition for surface roughness and rapid manufacturing time using design of experiment and ANOVA. From the results of experimentation, surface roughness have an effect on cutting direction, spindle speed and depth of cut. And then the optimum condition used Taguchi design is upward cutting in cutting direction, 600rpm in spindle speed, 240mm/min feed rate, 2mm in axial depth of cut and 0.25mm radial depth of cut. By using design of experiment, it is effectively represented shape characteristics of working surface in end-milling.