• Korean Institute of Interior Design Journal
• /
• no.2
• /
• pp.29-39
• /
• 1994

The purpose of this study was to design rural kitchen furnitures. Thirty seven rural houses were selected for this study. Present and past uses of space for cooling and dining were investigated by a field survey method. The Major findings were that ; 1) Sink, mixing, and range centers should be installed in rural kitchen 2) The depth of working center, 550-600mm was recommended. And working space cold be added by 150mm in depth and 100mm in height. The height of working center, 820mm-850mm was recommended . The minimum width of sink was 900 mm and the optimum one was 1200mm. The optimum width of mixing center and cooking center were 600m respectively 3) In the low ceiling of kitchen or the wooden structure of kitchen, a wall cabinet without upper cupboard was recommended. On the basis of the results, four types of rural kitchen furnitures is proposed.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.11 no.1
• /
• pp.33-41
• /
• 2005

The construction can proceed in different ways according to the acquired profitability of the hospital during the construction and to the features of departments or areas. This study is an analysis of remodeling construction processes to resolve major tasks of remodeling. The remodeling strategies gained from this study can be summed up as follows: 1) Remodeling work in hospitals involves the acquire relocation of space through extensive area renovations and then moving back to the space, and lastly working on the empty space. Thus, it is more advantageous in terms of construction work to demolish the existing buildings than to acquire the relocation space through extensions or renovations. That is, demolition after the maximum utilization of the existing buildings is the most desirable in terms of space availability. 2) The construction methods for remodeling are two: a method of carrying out construction by dividing the plane areas into several individual ones and of working on it floor by floor. In case of ward areas, and the outpatient area, the construction proceeds after securing the relocation space and partially setting construction areas in order to minimize the decrease in profitability due to the smaller number of beds and treatment rooms during construction. If the outpatient diagnosis/ treatment area and the supply area relocate together with the ward areas, there may be extra expenses. Thus, doing construction by area, while partially operating those areas or after relocating the whole areas.

• Journal of Space Technology and Applications
• /
• v.1 no.3
• /
• pp.283-301
• /
• 2021

In order to satisfy the intellectual curiosity of mankind to explore the unknown, National Aeronautics and Space Administration (NASA) in the United States and European Space Agency (ESA) in Europe are embarking on various R&D under the motto of the grand dream of pioneering space into a safe and sustainable environment. In the 2020s and 30s, it is expected that advanced giant observation equipment will be in operation, such as the development of a 10-meter-class telescope in space. In Korea, following the development of the 0.15 m Near-Infrared Imaging Spectrometer (NISS), Korea Astronomy and Space Science Institute (KASI) is also participating a 0.2 m Spectro-Photometer for the History of the Universe, Epoch of Reionization, and Ices Explorer (SPHEREx) as an international cooperation partner in small exploration telescope. However, domestic experience in the development and operation of the space telescopes is still insufficient, and there is no plan with long-term prospects for constructing telescopes. In order to answer questions about the unknown world that mankind has not experienced using our own equipment, planning and preparation for the construction of a space telescope through close cooperation among industry-university-institute-government is urgently needed. In this paper, the necessity, background, development goals, and expected effects of the development of the Korean Space Telescope are summarized conceptually, and a working group (WG) is also proposed. In the WG activities, Korea shall take the lead in establishing the Korean-style space telescope development plan, and will start a valuable step to establish the national direction in the field of space astronomy and related technologies. We hope that the WG will be another milestone in Korea's space development.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.105-108
• /
• 2017

Condensation is one of the common issues which we can easily see in everyday life. For example, the surface of glasses with cold water is easily moisturized. This wet surface gives us uncomfortable feeling and is sometimes dangerous because it is slippery. As the safety on working space is one of the most important issue on offshore project, condensation is also important matter to take care of with precaution. Since the bottom of vessel or offshore facility is submersed in the water, the risk of having condensate on the steel surface is getting higher because sea water temperature is normally lower than ambient temperature. And if there is any electric equipment or person working in that space, condensation is normally not allowed. The pontoon of semi-submersible drilling rig is such a space which is submersed, with electric and mechanical equipments and person working periodically. To prevent condensation in pontoon, study was conducted by checking several cases.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.33-48
• /
• 2007

The goal of this study is to propose the effective method of investigating the injurious factors and making improved plans that prevents the workers against musculoskeletal disorders at an autopart company and the same business field with similar working conditions and process. A questionnaire were adopted to analyze the symptoms of workers' musculoskeletal disorders, and an ergonomic assessment method such as QEC, RULA, S.I were performed to find out harmful factors of workplace and working posture. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. It can be concluded that the method and process described in this paper could be helpful for diagnosing the musculoskeletal disorders and making improvement plans to the autopart company and the same business field with similar working conditions and process.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.2
• /
• pp.85-94
• /
• 2005

The purpose of this study is to execute the investigation of injurious factors causing muscle-skeletal diseases at an automotive glass manufacturing company and, on the basis of the results, to enhance productivity by the improvement of working environment. By using an survey and an ergonomic evaluation method, symptoms of muscle-skeletal diseases of workers and working postures at each process were analyzed, and quantitative evaluation of muscle-skeletal disease risk against each process was performed. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. Suggested improvement plan was applied to the workplace step by step and it is confirmed that improvement plan not only removes the injurious factors of muscle-skeletal diseases but also is effective to enhance productivity.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.654-661
• /
• 2013

The dynamic characteristics of a free-piston stirling engine(FPSE) with regard to the working frequency is investigated from theoretical and experimental studies. The FPSE is modeled as a two degree-of-freedom linear vibration system. A theoretical expression on the working frequency is derived from the instability condition for self-excitation based on the linear vibration model. A ${\gamma}$-type free-piston stirling engine is fabricated for experimental studies, and its working frequency is measured on various heater temperatures. Comparisons between the theoretical and experimental results reveal that the working frequency of the test FPSE depends on both the temperature of the compression space and the temperature difference between the expansion and compression spaces.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.3 no.4
• /
• pp.27-34
• /
• 1997

This study aims at proposing the basic architectural data of the medical recording department for the general hospital planning and design. This research investigated the size of working space and the chart custody space through actual survey and the present conditions of space were analyzed. In result, this study proposes the formula for the calulation of the chart custody space according to computerization level and the chart custody planning year.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.3
• /
• pp.245-256
• /
• 2017

In this study, we describe a new approach to real-time implementation of working path control for the forging and casting manufacturing process by vertical type articulated robot system. The proposed control scheme is simple in structure, fast in computation, and useful for real-time control of factory automation based on robot system. Moreover, this scheme does not require any accurate parameter information, nor values of the uncertain parameters and payload variations. Reliability of the proposed controller is proved by simulation and experimental results for robot manipulator consisting of arm with six degrees of freedom under the variation of payloads and tracking trajectories in Cartesian space and joint space. The vertical type articulated robot manipulator with six axes made in SMEC Co., Ltd. has been used for real-time implementation test to illustrate the enhanced working path control performance for unmanned automation of the forging and casting manufacturing process.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.3
• /
• pp.248-254
• /
• 2006

It is necessary to improve the exactness and adaptation of the working environment for the intelligent robot system. The vision sensor have been studied for a long time at this points. However, it has many processes and difficulties for the real usages. This paper proposes a visual servoing in the virtual environment to support OLP(Off-Line-Programming) path compensation and supplement the problem of complexity of the old kinematical calibration. Initial robot path could be compensated by pixel differences between real and virtual image. This method removes the varies calibrations and 3D reconstruction process in real working space. To show the validity of the proposed approach, virtual space servoing with stereo camera is carried out with WTK and openGL library for a KUKA-6R manipulator and updated real robot path.