• 제목/요약/키워드: Working Robot

검색결과 347건 처리시간 0.028초

전동차 트로이선 가설 작업 로봇의 이동제어 (Mobile Control of working robot for a Installed Trolley Cable)

  • 김실근;홍순일;홍정표
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제30권8호
    • /
    • pp.934-940
    • /
    • 2006
  • The aims of this study is to develop working robot for a installed trolley cable of an electric train and objective of this paper is to implement mobile control of working robot. In this paper an approach to method for scheme of a mobile control system is presented in a dynamic hybrid velocity/tension control of working robot. The working robot is composed the velocity and tension controllers using the concept of two-degrees-of-freedom servo-controller. This robot moved at same time a certain distance to constrain a constant tension and installed a trolley cable of an electric train. To move the robot the velocity control system have design and implemented. Simulation and experimental results are presented to illustrate the validity of designed mobil scheme.

Relationship between motion speed and working accuracy of industrial articulated robot arms

  • Goto, Satoru;Nakamura, Masatoshi;Kyura, Nobuhiro
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.230-233
    • /
    • 1993
  • This paper described a relationship between motion speed and working accuracy of industrial articulated robot arms. Working accuracy of the robot arm deteriorates at high speed operation caused by a nonlinear transformation of the kinematics and the time delay of the robot arm dynamic. The deterioration of the following trajectory was expressed as a linear function of the squares of the robot arm motion speed, depending upon a posture of the robot arm and division interval of the objective trajectory.

  • PDF

신발 접착제 도포 시스템을 위한 CAD 기반 로봇 오프라인 프로그래밍 (CAD Based Robot Off-line Programming for Shoe Adhesive Application System)

  • 윤중선;차동혁;김진영
    • 제어로봇시스템학회논문지
    • /
    • 제10권7호
    • /
    • pp.643-648
    • /
    • 2004
  • Most of shoes manufacturing processes are not yet automated, which puts restrictions on the increase of productivity. Among them, adhesive application processes particularly are holding the most workers and working hours. In addition, its working conditions are very poor due to the toxicity of adhesive agents. In case of automating adhesive application processes by using robots, the robot teaching by playback is difficult to produce high productivity because the kinds of shoes to be taught mount up to several thousands. Therefore, it is essential to generate the robot working paths automatically according to the kind, the size, and the right and left of shoes, and also to teach them to the robot automatically. This study deals with automated adhesive spraying to shoe outsoles and uppers by using a robot, and develops the program to generate three-dimensional robot working paths off-line based on CAD data. First, the three-dimensional data of an outsole outline or an upper profiling line are extracted from the two-dimensional CAD drawing file or the three-dimensional scanner. Next, based on the extracted data and the nozzle conditions for adhesive spraying, a robot working path is generated automatically. This research work is the core in automating adhesive spraying processes, and will do much for increasing productivity of shoes manufacturing.

경량화를 위한 수직 다관절로봇 매니퓰레이터의 해석 (Analysis of Aticulated Robot Manipulator to Reduce Body's Weight)

  • 최원홍;김태기;이의훈;최만수
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 추계학술대회 논문집
    • /
    • pp.575-581
    • /
    • 1993
  • This paper deals with analysis of articulated robot manipulator used for Arc welding and Material handling. Compared with present robot of which weight holding capacity is 6kg, this robot shows wider and symmetric working range for it's serial type mechanism. The link length is determined to have widest working range by using optimal simulation. To reduce body's weight, small AC servo motor is adopted and driving peak torque exerted at each joint is reduced by using dynamic analysis. So it is possible to reduce body's weight by 40% compared with the same class's robot and get wider working range. And by adopting modular design concept, each axis is designed to be changed easily for user's special need and repair.

  • PDF

전력케이블 가설용 작업로봇의 구성과 이동/장력 혼합제어에 관한 연구(1) (Scheme and Movement/Tension Control of Working Robot for the Installation of an Overhead Power Cable (1))

  • 최동수;이동훈
    • 한국안전학회지
    • /
    • 제31권5호
    • /
    • pp.28-34
    • /
    • 2016
  • When a electric power cable is installed in the air for newly or exchanged working, it is necessary at all time to hold a constant tension for an overhead power cable. And also a pendanted power cable is an extreme job to have work in a high sky. For this reason, the objective of this paper developments working robot for preventing disaster that tension of cable installed automatically power cable to hold a constant. So the working robot works at all the time two tasks for mobil and tension it come into a inference between two tasks, control is difficult. Control methode needs to suppress inference of two tasks. In this paper, for installation of overhead power cable, the scheme and control methode of working robot is presented. the robot work at a same time tow tasks that have hold a constant tension of the power cable and move a constant place while unfasten a winding cable at a drum on a chassis. Working robot consist of three parts with mobile system, tension system and control part. As it is applied the feedback/feedforward control, methode of hybrid control is established to suppress that interference come into between two tasks. The simulation programs is made out using models of mobil and tension system, and a proposed controllers. In accordance with simulation, the model of each systems is discussed to make out proper. And also parameters of controllers is selected a suitable value and the driving performance of robot is evaluated.

MRAC를 이용한 산업용 로봇의 실시간 게인 동조 (On-line gain Tuning of Industrial Robot Using MRAC)

  • 하회권;허남;이영진;이만형
    • 한국생산제조학회지
    • /
    • 제8권5호
    • /
    • pp.76-82
    • /
    • 1999
  • During operating given working a robot manipulator makes some problems such as the accumulation of the error or the deviation from the command trajectory. These problems are mainly due to the disturbance noise or unmodeled system parameters. To solve these problems most of robot manipulators equip the controller. But if exact controller gains are not seleced we can't decrease the working efficiency(such as compensation about error or deviation) of the robot manipulator. So in this paper we present the controller gain tuning law by which we can find the controller gain which satisfies the per-formance specification of the robot manipulator during working of the robot. The proposed algorithm is derived from the Laypunov direct method. And by the simulation on the 4-axis SCARA type robot(SAMSUNG SM5 Robot) we guarantee the performance of this algorithm.

  • PDF

먹매김 로봇 작업경로 설정을 위한 최적경로 탐색방법 (Path optimization method for shifting path planning of marking robot)

  • 임현수;김태훈;김태훈;김창원
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 봄 학술논문 발표대회
    • /
    • pp.144-145
    • /
    • 2022
  • Since the marking robot draws lines by point-to-point operation, the robot's shifting path greatly affects the working time and productivity. Therefore, it is required to analyze the movement method based on the robot's motion and plan to minimize the movement time. Therefore, this study proposes a method that can optimize the robot's shifting path to minimize the working time of the marking robot. Through the results of this study, it is expected that the non-working time of the marking robot will be reduced and the efficient operation will be possible.

  • PDF

수중작업 로봇의 동특성 및 제어에 관한 연구 (Dynamic characteristics and control of submerged working robot manipulator)

  • 강이석;송정섭;조형석
    • 대한기계학회논문집
    • /
    • 제15권2호
    • /
    • pp.488-496
    • /
    • 1991
  • Dynamic chanracterisitcs and control of a submerged working robot manipulator have been investigated for articulated type robot manipulator with three revoluted joints. A dynamic equation of the manipulator has been derived. The dynamic equation includes not only mass matrix, centrifugal and Coriolis terms and gravity terms but also added mass, buoyant force and drag force terms, which are important terms for underwater motion description. A series of simulations using computed torque method have been performed for the cases of straight and circular trajectory motion controls. The results of this study show that the dynamic characteristics of the submerged working robot manipulator are very different from that of the manipulator which works in air. The influences of added mass, buoyant force and drag force terms to the total required torques have been discussed as distribution ratios to the total required torques.

2족 보행 로봇 설계 및 구현 (Design and implementation of biped working robot)

  • 김명진;김남호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2007년도 추계종합학술대회
    • /
    • pp.522-525
    • /
    • 2007
  • 기존의 로봇과 2족 로봇의 가장 큰 차이점은 이동시 바퀴를 사용하지 않고 두 다리를 사용한다는 것이다. 상식적으로 생각해 보면 이동성과 안정성 면에서 바퀴는 다리보다 훨씬 효율적이다. 그럼에도 불구하고 2족 로봇은 수많은 역할을 해낼 수 있다. 그러나 두 다리로 중심을 잡고 안정적으로 걷는다는 것은 쉬운일이 아니다. 그래서 본 논문에서 2족 로봇의 보행을 위한 기술적 요소를 중심으로 시스템을 설계하고 구현에 대해 논의하고자 한다.

  • PDF

다중 로봇의 작업 교시를 위한 오프라인 프로그래밍 (Off-Line Programming for Task Teaching in a Muti-Robot System)

  • 김대광;강성균;손권
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.412-412
    • /
    • 2000
  • This paper presents a task teaching method for off-line programming of a multi-robot system. Teaching commands were developed in order to simplify a complex teaching process, to shorten the setup time for new working environment and to have flexibility for changes in working environment. Four teaching commands can be used to automatically generate trajectories of an end-effector of the robot in electronics assembly line. The robots used in the work cell are a four-axis SCARA robot and six-axis articulated robot. Each robot is controlled in a independent way while objects, working environment and robots are modeled in corresponding modules, respectively. The off- line programming system developed uses OpenGL for a smooth graphic effect in Window s where three dimensional CAD data can be leaded for graphical modeling.

  • PDF