• 대한토목학회논문집
• /
• 제38권3호
• /
• pp.477-485
• /
• 2018

건설공사시 발생하는 환경부하 관리를 위해서는 시공시 실제 투입되는 물량을 면밀히 파악할 필요가 있다. 현재 건설공사에서는 2D도면을 활용한 설계의 경우에는 실제 설계 도서간 물량산출 값의 오차, 설계항목의 누락이 발생하고 있으며 건설 공사의 경우 불확실한 요소들로 인하여 시공 중에도 빈번히 설계변경 및 오류가 발생하고 있다. 또한 2D 설계를 바탕으로 하는 LCA평가의 경우 도면, 내역서 등을 이용하여 작업자가 수기로 작업공종에 투입되는 자재를 산출해야하는 어려움이 있다. 본 연구에서는 2D 설계를 바탕으로한 물량산출과 BIM기반의 물량산출을 바탕으로 LCA 분석을 비교하여 시공과정에서 활용 할 수 있는 신뢰도 높은 환경부하평가 방법을 검증하고자 한다. 또한 설계도서를 활용한 내역기반의 2D설계의 물량산출 및 LCA 평가 방법을 제시하고, 3D 기반의 평가 프로세스를 비교 분석하여 BIM 설계기법 도입에 따른 LCA 평가 활용 가능성을 제시하고자 한다.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.133-140
• /
• 2020

Traction performance of a tractor varies depending on soil conditions. Sinkage and slip of the driving wheel for tractor frequently occur in a reclaimed land. The objective of this study was to develop a tractor suitable for a reclaimed land. Traction performance was evaluated according to soil conditions of reclaimed land and paddy field. Field experiments were conducted at two test sites (Fields A: paddy field; and Field B: reclaimed land). The tractor load measurement system was composed of an axle rotation speed sensor, a torque meter, a six-component load cell, GPS, and a DAQ (Data Acquisition System). Soil properties including soil texture, water content, cone index, and electrical conductivity (EC) were measured. Referring to previous researches, the tractor traveling speed was set to B3 (7.05 km/h), which was frequently used in ridge plow tillage. Soil moisture contents were 33.2% and 48.6% in fields A and B, respectively. Cone index was 2.1 times higher in field A than in field B. When working in the reclaimed land, slip ratios were about 10.5% and 33.1% for fields A and B, respectively. The engine load was used almost 100% of all tractors under the two field conditions. Traction powers were 31.9 kW and 24.2 kW for fields A and B, respectively. Tractive efficiencies were 83.3% and 54.4% for fields A and B, respectively. As soil moisture increased by 16.4%, the tractive efficiency was lowered by about 28.9%. Traction performance of tractor was significantly different according to soil conditions of fields A and B. Therefore, it is necessary to improve the traction performance of tractor for smooth operations in all soil conditions including a reclaimed land by reflecting data of this study.

• The Korean Journal of Pain
• /
• 제4권2호
• /
• pp.127-132
• /
• 1991

Recently a non-electronic, disposable and portable infusor(Baxter infusor with patient control module, Baxter health care Co., Deerfield IL 60015 USA: BI $\bar{c}$ PCM) has been developed that will deliver both a continuous drug infusion as well as allow the patient to deliver extra doses of medication on a demand basis under predetermined limitation of analgesics. Patients may also not require as high analgesic dose rate to control pain when the acceptable and tolerable level of pain relief can be maintained by this device. From April l99l, we have used a total l93 units of BI $\bar{c}$ PCM. These units consisting of two components which one made by a balloon reservoir(capacity 65 ml, flow rate 0.5 ml/hr) to store medication and to regulate the pump power(490 torr), and another two PCMs to regulate additional analgesic administration by patients demand at intervals of 1S minutes and 60 minutes. The dose administered to the patient can be varied by changing the concentration of the infusate within the balloon reservoir. These devices were utilized for the pain control of 44 patients. These patients were divided into two groups. Twenty seven cases had cancer pain and 17 cases had non-cancer pain. The Touhy needle(No. l8 G.) tip was inserted into the epidural space and was used to guide the catheter to the spinal nerve level corresponding to the most painful area. The device was connected to the opposite site of the catheter tip and was filled with 60 ml of mixture solution such as 0.5% bupivacaine 15 ml, morphine HCl 10 mg, trazodone 10 ml, Tridol 3 ml and normal saline 31 ml were administed as the initial dose. When the initial dose was less effective, the next dose could be varied by increasing the concentration of bupivacaine, by adding more morphine (5~10 mg), and by reducing the volume of normal saline. Using these modules of drug self administration, we experienced the following: 1) Improvement of patient's self titration of analgesic requirement was provided. 2) The patients anxiety with pain recurrence resulting from delays in administering pain control medication was decreased significantly. 3) The working load accompanying with the single bolus injection as the usual method was reduced remarkably. 4) There was urinary retention in 5 cases and pruritus in 4 eases which developed as side effects but respiratory depression and vomiting was not encountered in a single case.

• 드라이브 ㆍ 컨트롤
• /
• 제17권1호
• /
• pp.27-36
• /
• 2020

The aim of this study is to design a simulation model for an electric All-Wheel-Drive (AWD) tractor to evaluate the performance of the selected component and agricultural work ability. The electric AWD tractor consists of four motors independently for each drive wheel, and each motor is combined with an engine generator, a battery pack, and reducers. The torque data of a 78 kW-class tractor was measured during plow tillage and driving operation to develop a workload cycle. A simulation model was developed by using commercial software, Simulation X, and it used the workload as the simulation condition. As a result of simulation analysis, the drive system, including an electric motor and reducers, was able to cope with high load during plow tillage. The SOC (State of Charge) level was influenced by the output power of the motor, and it was maintained in the range of 50~80%. The fuel consumed by the engine was about 18.23 L during working on a total of 8 fields. The electric AWD tractor was able to perform agricultural work for about 7 hours. In the future study, the electric AWD tractor will be developed reflecting the simulation condition. Research on the comparison between the simulation model and the electric AWD tractor should be performed.

• 한국건축시공학회지
• /
• 제2권2호
• /
• pp.129-134
• /
• 2002

The strength and durability of concrete are affected by various factors such as the quality of material, mixing ratio, construction, the method of cure, time elapsed. the condition of test and etc., it is very difficult to pre-estimate the strength of concrete with the use of experimental specimen. The domestic standard of specimen cylindrical type and its sizes are both l0cm$\times$20cm and 15cm$\times$30cm, which are prescribed in KS F2405, and the loading speed is prescribed to test with 2~3kgf/$\textrm{cm}^2$ per second. The loading speed should have great effect on the compressive strength, but in reality in the construction site sometimes the loading speed is applied so dubiously that the value of the compressive strength can be unreliable. And the cross sectional area of a specimen should be level and smooth, otherwise it can be broken at a lower stress than the real strength through the eccentric or intensive working of the load. Capping should be carried out in order to measure the strength correctly. And used for capping are various materials such as capping compound, cement glue, plaster, mechanical grinding and etc. In this study, therefore, I have carried out an experiment on the relationship among the loading speed, the ratio of height to diameter of specimen, the method of capping, and the compressive strength, for the efficient quality control of concrete structures. So this study has been purposed to provide some basic data that can be used effectively at construction sites.

• 대한지역사회영양학회지
• /
• 제1권2호
• /
• pp.250-259
• /
• 1996

The school foodservice(FS) dietitians of conventional, co-management and central kitchen systems were compared for their levels of fatigue degrees in order to examine their work specification but no to diminish their educational roles. One hundred and thirtheen primary schools in Taejon and Chungcheongnam-Do participated in the survey, of which foodservice were consisted of 99 conventional types, 7 comanagement types and central kitchen types. Information was collected about the various working hours dietary behavior and fatigue symptoms of the dietitians. The results of this study were as follows : Among 3 school foodservice types, dietitians spent 8 hours and 16 minutes daily for their for their work on the average. However, the central kitchen type dietitans in cities spent 3 hours more compared to the others. The data from the dietitians' work schedule sheets showed that the 5 parts of dietitian's duties set in the school foodservice laws were not well performed. In the central kitchen type they spent more time for food production whereas in the conventional they spent more time for menu formation and hygiene control. It was found that fatigue levels of school foodservice dietitians were chronic with no difference among foodservice systems or among school locations. Our results indicated that nutrition education in primary schools was almost neglected. It is suggested that the school foodservice should meet all the objectives of school-lunch program even though they saved dietitians' work load more or less. The importance of students to improve their dietary habits could never be overlooked. (Korean J Community Nutrition 1(2) : 250-259, 1996)

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1824-1827
• /
• 2005

For application to micro fluid control systems such as ${\mu}TAS$ (Micro Total Analysis Systems) and DDS (Drug Delivery Systems), it is very significant to handle precise and minute flow rates with low pressure pulsation. In this study, a novel valveless piezoelectric pump using peristaltic motion with three disk type PZT actuators is presented. The newly devised pump with an effective size of $70mm{\times}60mm{\times}55mm$ has three actuator layers connected in series from inlet to outlet. The PZT actuator has a maximum displacement of 240 ${\mu}m$ and a maximum force of 1.6 N. When the driving voltage for PZT actuators is sequentially applied with a certain phase shift, the pumping is performed by peristaltic motion of liquid volume. The working fluid is shut off without the driving voltage. Three methods for sequential driving are proposed and experimentally investigated. First and second methods utilize an intermittent sinusoidal waveform with phase shift of $90{\circ}\;and\;120^{\circ}$, respectively. Third method uses a rectangular waveform with phase shift of $90^{\circ}$. A controller with multi-phase shifter is designed and fabricated. Then, frequency and voltage-flow rate characteristics and load pressure-flow rate characteristics are experimentally investigated to verify the validity of the developed pump.

• 한국게임학회 논문지
• /
• 제8권3호
• /
• pp.61-68
• /
• 2008

사진트리 기반의 지형 시각화 기법은 많은 응용 프로그램에서 활용되어 왔다. 하지만 전체 과정이 CPU에서 수행되기 때문에 GPU를 사용하는 다른 방법들에 비해 렌더링 성능이 떨어진다. 본 논문에서는 사진트리 기반의 지형 시각화 기법을 GPU에서 수행할 수 있도록 오차텍스처와 LOD텍스처를 제안하고, 상세단계가 적용된 사진트리 블록을 동일한 해상도의 메쉬로 채워서 렌더링 속도를 향상시키는 방법을 제안한다. 전처리 단계에서는 보편 공간에서 사진트리의 연속된 두 단계사이에서 지형의 높이 값 차이를 계산하여 오차텍스처에 저장한다. 렌더링 단계에서는 저장된 오차 값을 이용하여 투영된 오차 값을 계산하고, 그 결과를 LOD텍스처에 저장한다. LOD텍스처에 저장된 값을 이용해서 블록단위로 시각 절두체 선별을 하고 상세단계를 선택한다. 이 방법은 부하가 큰 상세 단계 선택 작업을 GPU에서 수행하고 블록단위 연산을 함으로써 작업량을 줄일 수 있다. 상세 단계가 서로 다른 블록이 인접해 있을 경우 T-정점 때문에 크랙이 발생하는데 원본 고도 데이터의 밉맵을 활용해서 이것을 제거할 수 있다.

• 드라이브 ㆍ 컨트롤
• /
• 제17권3호
• /
• pp.26-32
• /
• 2020

In modern society, the energy-saving problem of industrial vehicles is economically and environmentally critical. Energy savings using the potential energy of forklifts are one of the viable solutions to resolving this problem. The basic concept of this study is to operate the hydraulic motor and recharge the battery using the flow rate from the cylinder when loading heavy objects and lowering the fork. To save energy, the torque and rotational speed of the generator should be optimized according to the load and descent speed to increase efficiency. To this end, we propose a system that optimizes energy saving efficiency by controlling the swashplate angle of the variable hydraulic motor through the GA(Genetic-Algorithm). The results were verified by building and comparing fixed motor models and variable motor models using the AMEsim. The results of the study show that the proposed optimized swashplate angle increases the energy saving efficiency by approximately 6%-8%, depending on the working conditions.

• Steel and Composite Structures
• /
• 제46권6호
• /
• pp.773-791
• /
• 2023

Connections with damage concentrated to pre-selected components can enhance seismic resilience for moment resisting frames. These pre-selected components always yield early to dissipate energy, and their energy dissipation mechanisms vary from one to another, depending on their position in the connection, geometry configuration details, and mechanical characteristics. This paper presents behaviour insights on two types of beam-to-beam connections that the angles were designed as energy dissipation components, through the results of experimental study and finite element analysis. Firstly, an experimental programme was reviewed, and key responses concerning the working mechanism of the connections were presented, including strain distribution at the critical section, section force responses of essential components, and initial stiffness of test specimens. Subsequently, finite element models of three specimens were established to further interpret their behaviour and response that were not observable in the tests. The moment and shear force transfer paths of the composite connections were clarified through the test results and finite element analysis. It was observed that the bending moment is mainly resisted by axial forces from the components, and the dominant axial force is from the bottom angles; the shear force at the critical section is primarily taken by the slab and the components near the top flange. Lastly, based on the insights on the load transfer path of the composite connections, preliminary design recommendations are proposed. In particular, a resistance requirement, quantified by a moment capacity ratio, was placed on the connections. Design models and equations were also developed for predicting the yield moment resistance and the shear resistance of the connections. A flexible beam model was proposed to quantify the shear resistance of essential components.