• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.209-210
• /
• 2006

Hierachical Mobile IPv6 (HMIPv6) solves Micro-mobility protocol problem about Handover. Mobility Anchor Point(MAP) helps reducing the handover, but this makes a load on the MAP. Besides the MAP operates this work everytime, and every Nodes. In this paper, we propose the algorithm that reduces the amount of Map working.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.89-99
• /
• 2020

This study analyzed the load and the consumed power characteristics of a potato harvesting operation in a dry field. The potato harvesting operation was performed using an underground crop harvester mounted on an agricultural tractor with a rated engine power of 23.7 kW. The rotational speeds and the torque of the engine output shaft, rear axle, and power take-off (PTO) shaft were measured under various working conditions. The load spectrum and the consumed power were analyzed using the measured data. The results show that the consumed power of the rear axle increased as the working speed increased, while that of the PTO shaft decreased. The consumed power of the engine output shaft showed a similar trend with that of the PTO shaft, but the torque deviation was larger in the load spectrum. The results of previous studies were used to compare herein the consumed power and the load characteristics of the harvesting, rotary, and plow operations in a dry field. PTO and tractive power were highly consumed in the plow and rotary operations, respectively. The consumed power of the PTO shaft and the rear axle in the harvesting operation were 29-41% and 18-23% of the engine power, respectively. Compared to those in the rotary and plow operations, the engine power was relatively evenly distributed to the PTO shaft and rear axle in the harvesting operation.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제57권2호
• /
• pp.137-155
• /
• 2018

From the assumption that an individual's working memory capacity is limited, the cognitive load theory is concerned with providing adequate instructional design so as to avoid overloading the learner's working memory. Based on the cognitive load theory, this study aimed to provide implications for effective problem-based collaborative teaching and learning design by analyzing the level of middle school students' cognitive load which is perceived according to the problem types(short answer type, narrative type, project) in the process of collaborative problem solving in middle school function part. To do this, this study analyzed whether there is a relevant difference in the level of cognitive load for the problem type according to the math achievement level and gender in the process of cooperative problem solving. As a result, there was a relevant difference in the task burden and task difficulty perceived according to the types of problems in both first and second graders in middle schools students. and there was no significant difference in the cognitive effort. In addition, the efficacy of task performance differed between first and second graders. The significance of this study is as follows: in the process of collaborative problem solving learning, which is most frequently used in school classrooms, it examined students' cognitive load according to problem types in various aspects of grade, achievement level, and gender.

• Animal cells and systems
• /
• 제14권1호
• /
• pp.11-15
• /
• 2010

Long-term working memory (LTWM) is a subdivision concept of working memory and indicates the enhancement of performance in a working memory task. LTWM has been shown in humans who have been engaged in a specific task requiring working memory over a long time. However, there is very little understanding of the exact mechanism of LTWM because of limitations of experimental methods in human studies. We have modified the standard T-maze task, which is used to test working memory in mice, to demonstrate LTWM in an animal model. We observed an enhancement of performance by repeated experience with the same working memory load in mice, which can be regarded as an LTWM. This effect seems to depend on the condition wherein a delay was given. This task may be a good experimental protocol to assess LTWM in animal studies.

• Journal of Nutrition and Health
• /
• 제29권6호
• /
• pp.651-660
• /
• 1996

The purpose of this study was to examine and analyze the degrees and the influence factors of job satisfaction of dietitians working in hospitals in relation to performance of duty in their works and to provide effective management of hospital dietitians for high quality health and food service in hospital. The questionaire was prepared with reference to the previous studies on job satisfaction of dietitians working in hospitals throughout the nation. 201 dietitians in the country were surveyed. The period of research was from January 20 to February 28, 1995. The results are as follows. 1) In regard to the degree of job satisfaction of hospital dietitians, they showed the highest degree of job satisfaction in the relationships with fellow dietitians followed by worth and self-confidence, aptitude and interests, relationships with cooks, job stability, degree of recognition of the dietitians competence, supervision of the superiors, degree of application of professional knowledge, work load, wage level, degree of recognition of the importance of duty, cooperative relationships with load, wage level, degree of recognition of the importance of duty, cooperative relationships with doctors, degree of performance of clinical work, the number of dietitians, the prromotion system, and welfare system in that order. On the other hand, they showed the highest dissatisfaction with food service facilities. 2) The influence factors on job satisfaction are as follows. (1) Wage factor : Shorter weekday working hours and higher bonuses make greaster job satisfaction (R2=0.3115). (2) Working condition factor : Larger number of monthly holidays(R2=0.5142), shorter weekday working hours(R2=0.1077), longer previous food service experience and computer utilization (R2=0.1432) make greater job satisfaction. (3) Welfare factor : Welfare system (R2=0.4132) and promotion system (R2=0.1624) have to do with computer utilization. Job stability has to do with marital status and computer utilization (R2=0.1165). consequently, those married dietitians who use computers show higher job satisfaction. (4) Human relationship factor : Smaller mumber of patients receiving food makes greater job satisfaction (R2=0.1334). (5) Superivision factor : Shorter weekday working hours and larger number of monthly holidays make greater job satisfaction (R2=0.1709). (6) Achievement factor : Marriage, larger number of dietitians(R2=9.2293), age, larger number of monthly holiday, higher monthly wages and computer utiliazation (R2=0.1088) make greater job satisfaction. (7) Speciality factor : Marriage, longer current hospital tenure, higher position and working in seoul(R2=0.1142) make higher job satisfaction. (8) Job inclination factor : working in general hospitals rather than in oriental hispitals, working in seoul(R2=0.1776) and better bonuses(R2=0.1078)make greater job satisfaction. As a result, the following is suggested for the job satisfaction of hospital dietitions on the basis of this study : hospital dietitians can achieve miximum job satisfaction through smooth relationships with coworkers, and the responsible managers should improve welfare and working conditions for the job satisfaction of hospital dietitians.

• Journal of Information Processing Systems
• /
• 제19권5호
• /
• pp.702-712
• /
• 2023

Load balancing plays a crucial role in ensuring the stable operation of information management systems during periods of high user access requests; therefore, load balancing approaches should be reasonably selected. Moreover, appropriate load balancing techniques could also result in an appropriate allocation of system resources, improved system service, and economic benefits. Nginx is one of the most widely used loadbalancing software packages, and its deployment is representative of load-balancing application research. This study introduces Nginx into an educational administration system, builds a server cluster, and compares and sets the optimal cluster working strategy based on the characteristics of the system, Furthermore, it increases the stability of the system when user access is highly concurrent and uses the Nginx reverse proxy service function to improve the cluster's ability to resist illegal attacks. Finally, through concurrent access verification, the system cluster construction becomes stable and reliable, which significantly improves the performance of the information system service. This research could inform the selection and application of load-balancing software in information system services.

• 전력전자학회논문지
• /
• 제23권3호
• /
• pp.199-207
• /
• 2018

In this paper, an all-metal domestic induction heating (IH) system that can quickly identify ferromagnetic and non-ferromagnetic pots considering temperature changes in the working coil is designed. Load modeling is performed after analyzing the parameters of the pot material and the central misalignment of the working coil. To improve the performance and stability of the all-metal IH cooking heater, a power curve-fitting model is used to design a control system that quickly responds to load parameter fluctuations. In addition, a power control algorithm is established to compensate for the reference value by reflecting the increase in working coil temperature during heating of the non-ferromagnetic pot. The validity of the proposed control algorithm for the all-metal IH is verified by experiments using a 3.2 kW all-metal IH cooking heater.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.869-871
• /
• 1998

The extensive use of composite insulators for transmission lines can ultimately be justified only on long-term qualification tests. The actual load working on the insulator in the field is not static load but cyclic load. So in this paper, we discussed an examination of aging degradation by mechanical performance of composite insulators under static tension load and cyclic tension load. and also described useful approaches for analyzing their long term performance so as to develop reliable composite insulators. The static and cyclic tension load-time test data were examined by Weibull distribution for their capability of presuming long term performance. It was found that cyclic tension loads were more severe than static tension loads. The results also indicate that it may be relevant for an user to select composite insulators on basis of their performance under cyclic tension loads than static tension loads.

• Advances in materials Research
• /
• 제11권1호
• /
• pp.23-39
• /
• 2022

This work deals with the two-dimensional deformation in a homogeneous isotropic nonlocal magneto-thermoelastic solid with two temperatures under the effects of inclined load at different inclinations. The mathematical model has been formulated by subjecting the bounding surface to a concentrated load. The Laplace and Fourier transform techniques have been used for obtaining the solution to the problem in transformed domain. The expressions for nonlocal thermal stresses, displacements and temperature are obtained in the physical domain using a numerical inversion technique. The effects of nonlocal parameter, rotation and inclined load in the physical domain are depicted and illustrated graphically. The results obtained in this paper can be useful for the people who are working in the field of nonlocal thermoelasticity, nonlocal material science, physicists and new material designers. It is found that there is a significant difference due to presence and absence of nonlocal parameter.

• 대한치과보철학회지
• /
• 제35권3호
• /
• pp.517-534
• /
• 1997

It has been held that excessive mechanical forces to the osseous and soft tissues of the TMJ result in joint dysfunction. Understanding the stress pattern on TMJ is very important in TMJ research. But, it is very difficult to measure directly the biomechanical stress distribution in the TMJ when the mandible is loaded. Therefore, stress distribution in the TMJ during functional movement was studied through animal experiment or mathematical model. It was observed and compared the stress distribution occuring in the working and balancing condyle when lower right canine, lower right first molar and lower right second molar were clenched by the three dimensional finite element analysis. Also, stress distribution in the working and balancing condyles were observed and compared when $20^{\circ}$ forward and buccal bite forces were applied to the first molar. The results were as follows : 1. Stress distribution in the condyles during unilateral clenching of the first molar, second molar, canine showed no difference. In the working condyle, tensile force was concentrated on the lateral aspect of the condylar articular surface and condylar neck. And compressive force was concentrated on the anteromedial and lateral aspect of condyle. In the balancing condyle, tensile and compressive forces were concentrated on the lateral aspect of the condylar articular surface and stress transmission to the temporal bone was not observed. 2. When lateral forces were applied to the first molar, tensile forces were concentrated on the medial aspect of the condylar neck and condylar posterior surface in working and balancing condyle. Compressive force was concentrated on the anteromedial and lateral surface of the condyle and stress transmission to the temporal bone was not observed. 3. During unilateral clenching, stress in the working condyle decreased as the occlusal load moved posteriorly while the stress in the balancing condyle increased. when lateral force was applied to first molar, the incremental amount of stress was greater than vertical load. 4. During unilateral clenching, the average balancing/working condyle stress ratio was 2.52. There was a greater concentration of stress in the balancing condyle. The ratio increased as the occlusal load moved posteriorly and decreased considerably when lateral forces were applied to the first molar.