• 대한기계학회논문집B
• /
• 제26권2호
• /
• pp.318-327
• /
• 2002

In this paper, heat transfer and pressure oscillation characteristics on oscillating capillary tube heat pipe(OCHP) according to input heat flux, mixture ratio of working fluid and inclination angle were investigated and were compared single working fluid(R-142b) with binary mixture working fluid(R-142b-Ethano1). OCHP was made to serpentine structure of loop type with 10 turns by drilling the channels of length 220mm, width 1.5mm, and depth 1.5mm on the surface of brass plate. In this study, R-l42b and R-l42b-Ethanol were used as working fluids, the charging ratio of working fluids was 40(vol.%), the input heat flux to evaporating section was changed from 0.3W/㎠ to 1.8W/㎠, and mixture ratio of working fluid was R(100%), R(95%)-E(5%), R(90%)-E(10%), and R(85%)-E(15%). From the experimental results, it was found that the effective thermal conductivity of single working fluid was better than that of binary mixture working fluid. But, in case of binary mixture working fluid, critical heat flux was higher than that of single working fluid. And, the higher the mixture ratios of working fluid, the lower heat transfer performance. In case of pressure oscillation, as the inclination angle was lower, pressure wave was more irregular. These phenomena were more serious when the working fluid was binary mixture. Besides, when mixture ratio was higher, saturated pressure was increased, more irregular wave was observed and the mean amplitude was increased. For the same input heat flux, inclination angle and charging ratio, when pressure oscillation has sinusoidal wave, mean amplitude was small, and saturated pressure was low value, the heat transfer was excellent.

• 한국직업건강간호학회지
• /
• 제24권3호
• /
• pp.204-213
• /
• 2015

Purpose: This study investigated the relationship between working conditions and smoking among Korean employees using nationally representative data. Methods: We analyzed data from the Third Korean Working Conditions Survey to identify associations between various working conditions and smoking. We calculated the smoking prevalence depending on individual characteristics and working conditions. Also, multivariate logistic regression analysis was used to investigate the relationship between working conditions and smoking. Results: Company size, occupation type, employment type, working hours, working-time flexibility, and smoking-area policy were related to smoking among male employees, while company size, occupation type, employment type, and smoking-area policy were associated with smoking prevalence among females. Conclusion: Our results indicate that working conditions influence smoking prevalence, and the implementation of smoke-free policies is needed to target specific working conditions, including a strict no-smoking-area policy.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1995년도 춘계학술발표회 초록집
• /
• pp.78-81
• /
• 1995

In the present study, the spray column type of direct contact heat exchangers are studied experimentally to analyze heat transfer characteristics for solar energy utilization. These experiments are carried out in the line of solar heating system, major results are as follows ; 1) the flow and aspect of working fluid drop for maxium heat transfer 2) efficiency and volumetric heat transfer coefficient of D. C. H. X. with a heavier working fluid are higher than those of D. C. H. X. with a lighter working fluid

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.646-649
• /
• 2002

It can be effect on diagnosis of hydraulic machining system to analyze working conditions with shape characteristics of wear debris in a lubricated machine. But, in order to predict and estimate working conditions, it is need to analyze the shape characteristics of wear debris and to identify. Therefor, if shape characteristics of wear debris is identified by computer image analysis and the neural network, it is possible to find the cause and effect of moving condition. In this study, wear debris in the lubricant oil are extracted by membrane filter, and the quantitative value of shape characteristics of wear debris we calculated by the digital image processing. This morphological informations are studied and identified by the artificial neural network. The purpose of this study is In apply morphological characteristics of wear debris to prediction and estimation of working condition in hydraulic driving systems.

• 설비공학논문집
• /
• 제13권8호
• /
• pp.796-802
• /
• 2001

The purpose of the present study is to examine the heat transfer characteristics of the U-shape heat pipe for the cooling of semiconductor in subway train. Perflouro-carbon(PFC) was used as working fluid. Temperature distribution on the surface and heat transfer coefficients were investigated according to the working fluid volume percent and heating rate. The results were as follows; Optimum volumetric percent of working fluid was from 80% to 90%, and hat transfer coefficients of evaporation and condensation were as follows, respectively. $\hbar_ie=0.37\times(\frac{P_i}{P_O})$l_c}^0.3$,$\hbar_ic-4.2(\frac{\kappa_l^3p_l^2gh_fg}{\mu_lq_c_l_c}^\frac{1}{3}

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.190-193
• /
• 2022

In this work, the effect of sputtering working pressure for the tellurium film and its thin-film transistor was investigated. The transfer characteristics of tellurium thin-film transistors were improved by increasing the working pressure during sputtering process. As increasing working pressure, physical and optical properties of Te films such as crystallinity, transmittance, and surface roughness were improved. Therefore, the improved transfer characteristics of Te thin-film transistors may originate from both improved interface properties between the silicon oxide gate dielectric layer and the tellurium active layer with an improved quality of Te film. In conclusion, the control of working pressure during sputtering would be important for obtaining high-performance tellurium-based thin film transistor

• 대한간호학회지
• /
• 제50권6호
• /
• pp.837-847
• /
• 2020

Purpose: The purpose of this study was to investigate the effects of hospital characteristics on employment rate, working period, and retirement of ward nurses in Korea through a retrospective cohort study based on HIRAS data. Methods: Data were obtained from a report on medical care institutions of Health Insurance Review & Assessment Service (HIRAS). Data from 259,941 nurses who were working for a day or more from January 1, 2012, to December 31, 2016, at 2,942 medical care institutions were analyzed. Life table method analysis, Kaplan-Meier analysis, and Cox proportional hazard regression analysis were conducted. Results: The employment rates of 5 yeas and 10 years for the total sample were 38% and 28%, respectively. The estimated mean value of the working period was 3,642.7 days (SE: 17.4 days). Cox proportional hazard regression analyses revealed that nurses who were working at the general hospital/hospital, clinic, and nursing hospital were more likely to leave the hospital compared to those who were working at the 3rd general hospital. Nurses who were working at the medical institutions which were located in cities and countries, established by the private foundation, rated lower levels of nursing, and owned an insufficient number of beds, nurses and doctors were more likely to leave their workplace compared to those of the counterparts. Conclusion: This study indicates that hospital characteristics may play a significant role in retirement and working period of ward nurses in Korea. The improvement of hospital conditions to reduce ward nurses' retirement are needed.

• 패션비즈니스
• /
• 제17권5호
• /
• pp.138-150
• /
• 2013

This paper is purposed to study on the Influence of Working Condition and Job Satisfaction on the change of occupation of Cosmetologist(Hair & Skin Care) to reduce cosmetologist change of occupation. The research methods are surveying with 250 persons & doing statistics analysis such as frequency, factor, regression analysis, using SPSS V.14. The results are as belows; 1. working conditions are reduced by two factors (1) welfare working condition, (2) basic working condition, and job satisfactions are reduced by one factor job satisfaction. 2. There is a relationship demographic characteristics, such as years, income/month, number of colleague in working area, working time/day, day off/month, with change of occupation. 3. There is a relationship working condition with change of occupation. 4. There is a relationship job satisfaction with change of occupation.

• Safety and Health at Work
• /
• 제7권3호
• /
• pp.201-207
• /
• 2016

Background: Korean Working Conditions Surveys (KWCS), referencing European Working Conditions Surveys, have been conducted three times in order to survey working condition and develop work-related policies. However, we found three limitations for managing the collected KWCS data: (1) there was no computerized system for managing data; (2) statistical KWCS data were provided by limited one-way communication; and (3) the concept of a one-time provision of information was pursued. We suggest a web-based public service system that enables ordinary people to make greater use of the KWCS data, which can be managed constantly in the future. Methods: After considering data characteristics, we designed a database, which was able to have the result of all pairwise combinations with two extracted data to construct an analysis system. Using the data of the social network for each user, the tailored analysis system was developed. This system was developed with three methods: clustering and classification for building a social network, and an infographic method for improving readability through a friendly user interface. Results: We developed a database including one input entity consisting of the sociodemographic characteristics and one output entity consisting of working condition characteristics, such as working pattern and work satisfaction. A web-based public service system to provide tailored contents was completed. Conclusion: This study aimed to present a customized analysis system to use the KWCS data efficiently, provide a large amount of data in a form that can give users a better understanding, and lay the ground for helping researchers and policy makers understand the characteristics.

• 대한인간공학회지
• /
• 제30권4호
• /
• pp.451-458
• /
• 2011

Objective: This study is to develop a design and evaluation guide to the ergonomic design of the farm working convenient equipments in order for the elderly to use them easily and safely. Background: The aging population has already increased in farm villages. But due to the usage of the farm working equipments that did not reflect the characteristics and functional changes of aging, accidents and patients with disease are increasing. Method: The study investigated the functional changes and physical, cognitive, and sensuous characteristics of the aged. By determining the criteria for classification of the convenient equipments by crop, and by finding out the items necessary for the ergonomic design, a guide to this study is proposed. Results: It is obvious that the physical, cognitive and sensuous functions change as the aging process continues. Therefore, for the design and evaluation of Control Panel, Control Lever, Frame Size, Shape, and Equipment Weight that are the necessary items for the ergonomic approach for the farm working equipments, such characteristics have to be reflected. Conclusion: Through this study, a guide to the design and evaluation of convenient equipments for the farm works that reflected the aging characteristics and functional changes has been proposed. Application: The result of this study is to expect not only designers but also related specialists to make the best use of it.