• Journal of Technologic Dentistry
• /
• 제33권4호
• /
• pp.379-390
• /
• 2011

Purpose: This study was conducted to improve the working conditions of dental technicians, through survey for working conditions related to perform one's duty, the extent of personal exposure to substances hazardous and complaint rate and factor of job stress and subjective symptom on musculoskeletal disorders. Methods: Using four types of structured questionnaires: social and demographic factor; the actual conditions of working space; working conditions; and characteristics of dental technicians, respondents filled in the questionnaires and the results were analyzed statistically. Results: The evaluation of comfort in working place found that satisfaction level on indoor noise was the lowest with 2.6 on a five-point scale and privacy space followed 2.8 point. In reasons for dissatisfaction with job, over workload ranked the highest by 25.4% and role overload had the highest by 39.5% in job stress factors. Based on the results, we could draw conclusion that dental technicians were unsatisfied with role overload and heavy workload a day. In reasons for musculoskeletal symptom prevalence, long-patient work was the highest by 24.1%. It was thought to cause dental technicians need deep procession and long-patient work due to the nature of their job. Conclusion: In conclusion, noise reduction and privacy space are required to improve job efficiency of dental technicians. In addition; we need to think of ways to increase the job satisfaction with adequate rest while deep procession and long-patient working.

• Journal of Korean Society of Forest Science
• /
• 제88권3호
• /
• pp.309-319
• /
• 1999

This study was conducted to get forest scenic beauty management information toward forest working systems; characteristics in Larix forest stands. 35 different alternatives were simulated to visualize on basis of actual forest working methods. The options were illustrated as photos produced by computer software. Each alternatives were evaluated by 3 groups with total 593 respondents after reliability test. Visual preference evaluation was used 1 - 10 point rating scale. The ratings were scaled using SBE analysis program of RMRATE. To compare the relationship of visual preference and image scale, Spatial images of 13 thinning alternatives were measured by Semantic differential scale. In general, the respondents preferred refreshing and ordering forest stand after forest working to natural forest stand before forest working. Visual preference decreased with the increasing intensity of bare ground area and slash area in forest stand. And also, visual preference was high related to tree density, clear length of stem, and ground vegetation. Farm line of small clear cutting area was preferred straight line to curve line. Visual preferences were significant differences in certain socioeconomic variables of the respondents. Results indicate how to conduct forest working system for forest scenic beauty management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제41권5호
• /
• pp.601-608
• /
• 2021

Recently, despite a decrease in the number of working days and an increase in the number of non-working days due to an increase in the abnormal climate and the revision of the Labor Standards Act, a standard construction period reflecting this has not been established. For this reason, even if the appropriate construction period is calculated at the site, there is a situation where delays occur due to unexpected circumstances. Therefore, this study proposes a method of calculating the number of non-working days for railway bridgework construction that reflects changes in construction conditions and climate change and reflects this to railway bridgework construction, and the number of working days was calculated. As a result, the number of non-working days by region and month in Korea was derived, and through this, the necessity of regulations and standards for appropriate construction periods reflecting regional characteristics and characteristics of each construction type was presented.

• Journal of Environmental Health Sciences
• /
• 제46권5호
• /
• pp.539-547
• /
• 2020

Objectives: This study was performed to emphasize improvement of the perception of dental hygienists' environmental working conditions by analyzing various factors. Methods: Two hundred ninety-eight female dental hygienists working at 35 medical institutions in Daegu City and Gyeongsangbuk-do Province participated. A self-recording type survey was done in October 2016. Results: Factors influencing the perception of infection control was length of career. Dental hygienists with more experience have a higher level of perception. Factors influencing the perception of working posture was the number of patients per day and career level. Dental hygienists seeing 50 or fewer patients per day and senior staff showed higher levels of this perception. Factors influencing the perception of noise in the working area were length of career and lunchtime break. The perception level was high in the group with longer careers and dental hygienists who rest at lunch time. Factors influencing chemical exposure during work were the number of patients per day and the type of institute. Dental hygienists working in dental clinics or dealing with more patients had lower levels of perception. Conclusions: The sociodemographic and working characteristics of dental hygienists influence the perception of dental hygienists' environmental working conditions.

• Journal of Korean Institute of Industrial Engineers
• /
• 제2권1호
• /
• pp.61-78
• /
• 1976

The purpose of this study is to establish the horizontal and vertical working area which is dependent on measuring value of workers, body in order to make easy and stable working environments, and then to design the size of machines, tools and instruments in production factory because of making the practical production conditions which is the most suitable to human characteristics. But there is necessity that we have to review numeric value of measurement periodically because the size of workers' body is variable according to periodic and social circumstances. The establishment of standard working area after measurement enable us to make the best working conditions and we can design standard working table, optimum size of all machines and tools in production activity. Therefore, we can also acknowledge the importance of studying on human engineering because human engineering is necessary to reduction of fatigue in working, saving workers from industrial accidents, fail-safe system, improvement of productivity with increase in efficiency and etc. Finally, this study informs us that numeric value of measurement is larger than that of Japan, but not than that of America and Germany. So we can establish standard working area which is the most suitable for Korean inherence after measurement of detailed parts for workers' body.

• Geomechanics and Engineering
• /
• 제20권5호
• /
• pp.447-459
• /
• 2020

Based on the literature statistical method, the paper publication status of the isolated working face and the distribution of the rockburst coal mine were obtained. The numerical simulation method is used to study the stress distribution law of working face under different mining range. In addition, based on the similar material simulation test, the overlying strata failure modes and the deformation characteristics of coal pillars during the mining process of the isolated working face with thick-hard key strata are analyzed. The research shows that, under the influence of the key strata, the overlying strata formation above the isolated working face is a long arm T-type spatial structure. With the mining of the isolated working face, a series of damages occur in the coal pillars, causing the key strata to break and inducing the rockburst occurs. Combined with the mechanism of rockburst induced by the dynamic and static combined load, the source of dynamic and static load on the isolated working face is analyzed, and the rockburst monitoring methods and the prevention and control measures are proposed. Through the above research, the occurrence probability of rockburst can be effectively reduced, which is of great significance for the safe mining of deep coal mines.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.389-394
• /
• 2007

The power output of the stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide basic data for the design of the regenerator matrix, characteristics of working fluid velocities were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, two different wire screens were used. The results are summarized as follows; 1. When a regenerator is not filled with any wire screen, working fluid velocity of the oscillating flow shows 1.3 times faster than that of one directional flow. 2. When a regenerator is filled with the wire screen of No.50, working fluid velocity of the oscillating flow reveals 2.5 times faster than that of one directional flow. 3. When a regenerator is filled with the wire screen of No. 100, working fluid velocity of the oscillating flow shows 2 times faster than that of one directional flow, regardless of the number of packed wire screens. 4. Working fluid velocity is decreased wire the increase in number of meshes and packed wire screens.

• Journal of the Korean Society for Precision Engineering
• /
• 제33권5호
• /
• pp.401-407
• /
• 2016

This paper describes the derivation methodology of the working torque predictive model that can be used in the initial design stages of the impact hammer tool. The working torque control mechanism is designed, taking into account various factors, such as the force of the spring and friction. Firstly, the analysis dynamic model for working environments was modeled as an additional bush and spring, and verified by comparing the test results of the working torque. Secondly, the main performance parameters of the working torque were theoretically defined by analyzing the operating mechanism. The equation to predict the working torque was derived using the dynamic analysis results according to the value changes of the parameters. The prediction equation of the working torque was validated by comparing the predicted results with the experimental data. The error difference between the experimental data and the predictive model results was found to be 8.62%.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.354-362
• /
• 2002

In this paper, the heat transfer characteristics of a self-oscillating heat pipe are experimentally investigated for the effect of various working fluid fill charge ratios and heat loads. The characteristics of temperature oscillations of the working fluid are also analysed based on chaotic dynamics. The heat pipe is composed of a heating section, a cooling section and an adiabatic section, and has a 0.002m internal diameter, a 0.34m length in each turn and consists of 19 turns. The heating and the cooling portion of each turn has a length of 70mm. A series of experiments was carried out to measure the temperature distributions and the pressure variations of the heat pipe. Furthermore, heat transfer performance, effective thermal conductivity, boiling heat transfer and condensation heat transfer coefficients are calculated for various operating conditions. Experimental results show the efficacy of this type of heat pipe.

• Journal of Environmental Health Sciences
• /
• 제21권4호
• /
• pp.75-86
• /
• 1995

This study was performed to investigate the negative side effects of video display terminal (VDT) work on the human body and to provide data for preventing VDT syndrome. A questionnaire survey was made to 339 VDT workers at 22 offices in Taegu, Kyungpook and Kyungnam areas from July 1 to August 31, 1994, and 280 of them were finally used for statistical analysis. The VDT syndrome in the present study inclhded five factors, namely as eye-related symptom, psychological symptom, general body symptom, musculoskeletal symptom, and skin-related symptom, and the estimates of Crombach coefficients of the five factors were 0.954, 0.952, 0.953, 0.957, and 0.955, respectively, showing very high reliability. In view of socio-economical characteristics, the symptoms of female were higher than those of male in the order of musculoskeletal symptom, eye-related symptom, skin-related symptom and psychological symptom. The age group of 30 years or less was higher than the older groups in the order of musculoskeletal symptom, eye-related symptom, psychological symptom and skinrelated symptom. The group of lower education level showed higher skin-related symptom. The psychological symptom and skin-related symptom increased as the amount of smoking increased. Higher eye-related symptom was observed in the group without glasses. In the job-related variables, the group of working on programming and data input showed higher eye-related symptom and psychological symptom. The group of working on programming and graphic design showed higher musculoskeletal symptom and skin-related symptom. The skin-related symptom increased as the total time of VDT operation per day increased. The group of working 2-4 hours followed by 15 minutes rest was higher in musculoskeletal symptom and psychological symptom. Higher musculoskeletal symptom was observed from the group working on Friday and Sunday. The group of 1 year or less working showed higher in skin-related symptom. In relation with the VDT type, all symptoms except skin-related symptom were higher in the group using monochrome monitor. As showed above, the questionnaire could be a tool for evaluating VDT syndrome and prevention of the syndrome would be possible by a comprehensive consideration of factors including socio-economic characteristics, job-related variables and VDT type.