• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.212-228
• /
• 2013

Stone cultural heritages are repaired by the use of metal stiffeners. The problem is that this type of repair has been based on the experience of workers without specific guidelines and has caused various problems. This is to suggest the structural reinforcement and behavioral characteristics of metal rods to minimize the secondary damage of materials and have the specimens tested and verified to establish the guidelines on how to insert metal stiffeners. When only epoxy resin is applied to the cut surface, only 70% of the properties of the parent material are regenerated and it is required to structurally reinforce the metal stiffener for the remaining 30%. The metal rod is under the structural behavior after the brittle failure of stone material and the structural behavior does not occur when the metal stiffener is below 0.251%. When it accounts for over 0.5%, it achieves structural reinforcement, but causes secondary damage of parent materials. The appropriate ratio of metal stiffener for the stone material with the strength of $1,500kgf/cm^2$, therefore, should be between 0.283% and 0.377% of the cross section of attached surface to achieve reversible fracture and ductility behavior. In addition, it is more effective to position the stiffeners at close intervals to achieve the peak stress of metal rod against bending load and inserting the stiffener into the upper secions is not structurally supportive, but would rather cause damage of the parent material. Thus, most stiffeners should be inserted into the lower part and some into the central part to work as a stable tensile material under the load stress. The dispersion effect of metal rods was influenced by the area of reinforcing rods and unrelated to their diameter. However, it ensures stability under the load stress to increase the number of stiffeners considering the cross section adhered when working on large-scale structures. The development length is engineered based upon the diameter of stiffener using the following formula: $l_d=\frac{a_tf_y}{u{\Sigma}_0}$. Also, helically-threaded reinforcing rods should be used to perform the behaviors as a structural material.

• Journal of Science and Technology Studies
• /
• v.19 no.2
• /
• pp.169-206
• /
• 2019

This article seeks to explore new relationships and ethics of human and technology by analyzing a cultural imaginary produced by artificial intelligence. Drawing on theoretical reflections of the Feminist Scientific and Technological Studies which understand science and technology as the matter of care(Puig de la Bellacas, 2011), this paper focuses on the fact that artificial intelligence and robots materialize cultural imaginary such as autonomy. This autonomy, defined as the capacity to adapt to a new environment through self-learning, is accepted as a way to conceptualize an authentic human or an ideal subject. However, this article argues that artificial intelligence is mediated by and dependent on invisible human labor and complex material devices, suggesting that such autonomy is close to fiction. The recent growth of the so-called 'assistant technology' shows that it is differentially visualizing the care work of both machines and humans. Technology and its cultural imaginary hide the care work of human workers and actively visualize the one of the machine. And they make autonomy and agency ideal humanness, leaving disabled bodies and dependency as unworthy. Artificial intelligence and its cultural imaginary negate the value of disabled bodies while idealizing abled-bodies, and result in eliminating the real relationship between man and technology as mutually dependent beings. In conclusion, the author argues that the technology we need is not the one to exclude the non-typical bodies and care work of others, but the one to include them as they are. This technology responsibly empathizes marginalized beings and encourages solidarity between fragile beings. Inspired by an art performance of artist Sue Austin, the author finally comes up with and suggests 'artificial intelligence in wheelchair' as an alternative figuration for the currently dominant 'autonomous artificial intelligence'.

• Journal of the HCI Society of Korea
• /
• v.14 no.2
• /
• pp.5-12
• /
• 2019

Social exclusion, which does not fulfill the desire for respect as one of the most basic human desires, makes those who perceive themselves to be socially excluded seek physical warmth. However, very few studies have examined whether this phenomenon-wherein social exclusion develops a preference for warmth-can be generalized to the emotional or symbolic aspects, such as the color of lighting. This study aimed to verify the effects of perceived social exclusion on warm lighting preferences, and two experiments were performed for this purpose. In Experiment-1, participants who were respected by people the previous day were assigned to the group that did not perceive social exclusion (non-perceived social exclusion group), and those who were not respected were assigned to the group that perceived social exclusion (perceived social exclusion group). Following this, their preference for warm lighting (3000K), neutral lighting (4000K), and cold lighting (6000K) was measured. The results showed that the perceived social exclusion group had a stronger preference for warm lighting and a weaker preference for cold lighting than did their counterparts. Moreover, the perceived social exclusion group showed a strong preference for warm lighting over neutral lighting; they also showed a weak preference for cold lighting. In Experiment-2, after assigning the participants into groups as in Experiment-1, the participants' preference for a space with warm lighting, neutral lighting, and cold lighting was measured. The results showed that the perceived social exclusion group had a stronger preference for the space with warm lighting and a weaker preference for cold lighting than did their counterparts. Further, the perceived social exclusion group showed a strong preference for the space with warm lighting over the space with neutral lighting; they also showed a weak preference for the space with cold lighting. The findings of this study have implications that can be applied to designing living spaces for people who experience social exclusion, such as handicapped individuals, multicultural families, or immigrant workers, as well as developing artificial intelligence services and cyber-friend characters for this demographic.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.165-189
• /
• 2006

The purpose of this study is to examine process and organization of local government-managed construction by reviewing official documents and materials in regard to the official residences and castles officially constructed in Dongnae in the 19c Chosun Dynasty. Results of this study can be described as follows. 1) The construction of official residences requires exchanges of official documents among upper and lower governmental agencies concerned. Previously prepared for some 1 or 2 months, the construction was proceeded through proceeded from Paok to Gaegi, Ipju, Sangryang, Gaeok and to Iptaek. Such construction was carried out independently and concurrently Gijang and Yangsan neighboring Dongnae provided cooperation by way of supplying labor and timbers. 2) Dongnaebu castle was constructed under local autonomy system, like other government-oriented works, as governor of Dongnae became responsible for defending such establishment in 1739. The castle was built up in 1731 as an establishment with 6 gated and 15 forts. Directly controlled by governor of Dongnae, the castle continued to be partially repaired until the 19th century. Under the regime of Daewongun, the castle was enlarged and extended for military strengthening. Besides the gate having double-gated structure for the outside wall, the other five gates came to have bastions and 30 forts were additionally established, dramatically changing the structure of the castle as whole. 3) Government-managed construction was often implemented by an organization whose members included local government officials, lower administrative agencies and local influential persons. The construction of official residences was implemented by Gamyeokdogam which was headed by Jwasu of Hyangcheong. In the construction, chief of military officials became supervisor, who was responsibly supported by Saekri. The construction of castled were divided into several works, for example, establishments of fortress, tower gate and quarrying stone were implemented by the organization of Paejang, Gamkwan and Saekri. As a military official, Gamkwan supervised the construction. Saekri was in charge of related internal affairs. Paejang was an technical expert leading several workers. The construction of castles in 1870 were organized as a general rule having particularity of social conditions on Dongnae.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.637-651
• /
• 2019

In the event of a major accident such as an explosion in a refinery or a petrochemical plant, it has caused a serious loss of life and property and has had a great impact on the insurance market. In the case of catastrophic incidents occurring in process industries such as refinery and petrochemical plants, only the proximate causes of loss have been drawn and studied from inspectors or claims adjustors responsible for claims of property insurers, incident cause investigators, and national forensic service workers. However, it has not been done well for conducting root cause analysis (RCA) and identifying the factors that contributed to the failure and establishing preventive measures before leading to chemical plant's catastrophic incidents. In this study, the criteria of warning signs on CCPS catastrophic incident waning sign self-assessment tool which was derived through the RCA method and the contribution factor analysis method using the swiss cheese model principle has been reviewed first. Secondly, in order to determine the major incident warning signs in an actual chemical plant, 614 recommendations which have been issued during last the 17 years by loss control engineers of global reinsurers were analyzed. Finally, in order to facilitate the assessment index for catastrophic incident warning signs, the criteria for the catastrophic incident warning sign index at chemical plants were grouped by type and classified into upper category and lower category. Then, a catastrophic incident warning sign index for a chemical plant was developed using the weighted values of each category derived by applying the analytic hierarchy process (pairwise comparison method) through a questionnaire answered by relevant experts of the chemical plant. It is expected that the final 'assessment index for catastrophic incident warning signs' can be utilized by the refinery and petrochemical plant's internal as well as external auditors to assess vulnerability levels related to incident warning signs, and identify the elements of incident warning signs that need to be tracked and managed to prevent the occurrence of serious incidents in the future.

• The Korean Journal of Archival Studies
• /
• no.39
• /
• pp.281-318
• /
• 2014

This article aims to inquire into the decision making system and the sources of the original documents made by means of it in Imperial Japan, the colonial Chosun, GHQ, and the occupied Japan in terms of the post-war treatments of compensation on the Japanese colonial rules. It deals with them from 1910 to 1952 in the perspective of history and archivistics. This article attempts to establish the foundation on which the perception of the documents made in the Imperial Japan, its colony, and the occupied territory would be widened by placing the colonial rules and the compensation on them into a continuous line. The records of Japan's forced occupation of Korea during 1910-1945, and the original records documenting the decision making process of post-war compensation under GHQ, 1945-1952, have been dispersed in Korea, Japan and the United States. This dispersed preservation was mainly due to the complicated decision-making process among Governor-General of Chosun, the Japanese Imperial government, and the GHQ. It was the top-down styled, dual decision making system, in which the critical policies, personnel, and budget had been decided in Imperial homeland, while their implementations were made in the colonies. As a result, the records documenting the whole process of domination have been preserved dispersedly in Japan and its colonies. In particular, the accounts of not yet paid Korean workers that was forced to mobilize in Japan's colonial periods, which is emerging as the diplomatic conflict between Korea and Japan, had been dealt in the decrees of the Japanese government and policy-making of GHQ. It has already been changed to the problem as 'economic cooperation' from the 'debt'. Also, the critical records for post-war compensation were preserved dispersedly in the United States and Japan under the top-down decision making process of GHQ-Japan. Therefore, the dispersed records of 1910-1952 about the colonial rules by the Imperial Japan and the post-war compensation on them must be re-investigated for the adequate documentation in the context of time and space.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.552-560
• /
• 2018

Since 1960's, the large conglomerates of South Korea have grown due to the corporate-centered, fast-paced growth drive, while the small and medium-sized businesses supported the country's economy as the subordinate structure of these conglomerates. Due to the globalization of the business environments, the focus of competition shifted from competitions between individual companies to one between networks of companies. Therefore, more emphasis is now put on the capabilities of the cooperation networks between companies rather than the capabilities of individual companies. Therefore, in this study, the author examined the influence of the win-win growth strategy elements through cooperation with small and medium-sized businesses upon corporate performance. This study was conducted with the workers of small and medium-sized businesses that have previous cooperation experiences with South Korean conglomerates over the period from March 2 to May 17, 2018. For this, a total of 515 questionnaires were retrieves to obtain the data for analysis. The analysis was conducted using SPSS 22.0 and AMOS 18.0. The analytical processes that were taken included exploratory factor analysis, confirmatory factor analysis, confidence analysis, correlation analysis, and structural equation analysis model. The results of the analysis showed that, first of all, the win-win growth strategy factors that affected the strategic performance, which is a part of cooperate performance were, respectively, harmonization with the goals, production technical support, and quality system. Second, the win-win growth strategy factors that affected the financial performance, which is a part of corporate performance, turned out to be harmonization with the goals, quality system, and incentive. With the results of this study, it was shown that the elements such as harmonization with the goals, production technical support, quality systems, and incentives were key infrastructural factors that affected the corporate performance directly. On the other hand, its implication is that informative or knowledge-related factors, such as joint knowledge creation, do not have their own added values, while they are not too much likely to affect corporate performances for the moment.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.2
• /
• pp.235-247
• /
• 2019

In order to achieve the results that are appropriate for the purpose of the enterprise, it is important to comprehensively understand the behaviors within the roles of the members of the organization and actions outside the roles. However, there have been relatively few studies on corporate social responsibility (CSR) among the existing studies that have been conducted to date. In particular, organizational citizenship behavior, a voluntary commitment by organizational members, is perceived as a very effective way of enhancing corporate performance, but studies on organizational citizenship behavior based on corporate social responsibility have rarely been conducted. In recent years, domestic companies have recognized social responsibility as an activity rather than an additional activity. Therefore, it is very meaningful to look at the organizational performance by examining the factors that make up this social responsibility from the perspective of the company. It is considered a task. In order to demonstrate this, this study collected 303 data from a business incubator center operated by universities and public institutions nationwide and used a total of 303 samples. As a result of the verification, the wages received by the members of the organization did not affect the organizational commitment, and the working hours and the working environment affected the organizational commitment. In addition, corporate social responsibility has an effect on organizational trust in the marketing side. Organizational commitment and organizational trust were studied to positively affect organizational citizenship behavior. In addition, this study divides the degree of perception of social responsibility of the organizational members into the high recognition group and the low recognition group and analyzed whether there is a difference in the level of organizational citizenship behavior according to the employment type (regular and irregular workers) The results of this study are as follows.

• Journal of Korea Foundry Society
• /
• v.41 no.2
• /
• pp.144-152
• /
• 2021

Based on the analysis of the current state of the world's foundry industry, we looked at the international competitiveness of Korea's foundry industry for the past 20 years. Korea's total foundry production is 2.52 million tons, and the production per company (so-called productivity) is 2,831 tons, which is the eighth largest in the world and down one position for the case of total foundry production, while productivity remains its position compared to three years ago. Korea is the only one of the top 10 foundry to see a decline in production. Similar to the global situation, Korean products consist of 38% of grey csat iron, 31% of ductile cast iron, 15% of aluminum, and 9% of cast steel. In order to obtain statistics on Korea's foundry industry, the survey conducted a service project for approximately nine months from April 2020. Various statistical surveys and sample in-depth surveys by the Korean standard industry class were evaluated for various contents of the domestic casting industry. We also looked at the number of companies, the distribution by region, the number of workers and the percentage of foreigners, and the distribution of each job, as well as the R&D investment status according to the size of the enterprise. Together, sales, exports, sales and various profit ratios were analyzed to measure the earning power of foundry industry. In addition, the classification by grouping the foundry industry according to the process utilized by focusing on each company, and to determine the sales, exports, and yield status for each process was also investigated on the basis. Based on these data, the domestic foundry industry has presented a variety of offers for the following issues for sustainable growth; global ranking, marginal corporate restructuring, training of domestic technical people, differentiated support policies by company size and process.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.423-431
• /
• 2011

The changes of forest degradation in North Korea have closely been related to political, economic and social conditions at all different times. The deforestation by local people for their livelihood has been accelerated when the recession has been worsened due to the 1990's collapse of socialism and the years of natural disasters, and the fall of the centralized and planned economy system. The serious recession in the 1990's has brought many changes in the North Korean society since the 2000's. Not only the underground economy, but also the market in which personal trades are occurred have been expanded as the distribution system of the planned economy system had fallen. In addition, even many state institutions have also increased timber harvest for export to acquire insufficient foreign currency. Eventually, North Korea felt the limits of utilization of forest resources under socialism then started to seek measures to restore devastated forest, while realizing the need of support from the international society. Therefore, some NGOs of South Korea started to give financial support on building tree nurseries in which seedlings for planting are produced to help the rehabilitation of the degraded forests in North Korea. Therefore, Planning of the basic directions for forest rehabilitation programs considering to economic and social conditions of North Korea are needed based on the successful rehabilitation experience of South Korea in the 1970's. First of all, relationships which was built after collapse of centrally planned economy between districts, businesses and workers must be consider to rehabilitate forests in North Korea. Secondly, due to the nature of forest rehabilitation projects this is very needs voluntary participation of resident for a long time, and then forest rehabilitation projects can create jobs for local resident, they can obtain continuous income on the forest rehabilitation projects field in order to promote resident's work in forest rehabilitation projects. Thirdly, the rate dependence on forests of the residents living must keep the level down by rural development projects going side by side with forest rehabilitation projects. Fourthly, use of exsisting forest management system in North Korea is also needed to ensure administrative power and labor for grand scale plantations in a short period of time. Meanwhile after the success of Forest Rehabilitation, it is very important to improve exsisting forest management system.