• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.1
• /
• pp.65-73
• /
• 2014

Objectives: The purposes of this study are to investigate workers' exposures to respirable particles generated in taconite mines and to compare two metric methods for mass concentrations using direct-reading instruments. Methods: Air monitorings were conducted at six mines where subjects have been exposed primarily to particulate matters in crushing, concentrating, and pelletizing processes. Air samples were collected during 4 hours of the entire work shift for similarly exposure groups(SEGs) of nine jobs(N=37). Following instruments were employed to evaluate the workplace: a nanoparticle aerosol monitor(particle size range; 10-1000 nm, unit: ${\mu}m^2/cc$, Model 9000, TSI Inc.); DustTrak air monitors($PM_{10}$, $PM_{2.5}$, unit: $mg/m^3$, Model 8520, TSI Inc.); a condensation particle counter(size range; 20-1000 nm, unit: #/cc, P-Trak 8525, TSI Inc.); and an optical particle counter(particle number by size range $0.3-25{\mu}m$, unit: #/cc, Aerotrak 9306, TSI Inc.). Results: The highest airborne concentration among SEGs was for furnace operator followed by pelletizing maintenance workers in number of particle and surface area, but not in mass concentrations. The geometric means of $PM_{2.5}$ by the DustTrak and the Ptrak/Aerotrak were $0.04{\mu}m$(GSD 2.52) and $0.07{\mu}m$(GSD 2.60), respectively. Also, the geometric means of RPM by the DustTrak and the Ptrak/Aerotrak were $0.16{\mu}m$(GSD 2.24) and $0.32{\mu}m$(GSD 3.24), respectively. The Pearson correlation coefficient for DustTrak $PM_{2.5}$ and Ptrak/Aerotrak $PM_{2.5}$ was 0.56, and that of DustTrak RPM and Ptrak/Aerotrak RPM was 0.65, indicating a moderate positive association between the two sampling methods. Surface area and number concentration were highly correlated($R^2$ = 0.80), while $PM_{2.5}$ and RPM were also statistically correlated each other($R^2$ = 0.79). Conclusions: The results suggest that it is possible to measure airborne particulates by mass concentrations or particle number concentrations using real-time instruments instead of using the DustTrak Aerosol monitor that monitor mass concentrations only.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.77-85
• /
• 2008

This work proposes a 12b 130MS/s 108mW $1.8mm^2$ 0.18um CMOS ADC for high-quality video systems such as TFT-LCD displays and digital TVs requiring simultaneously high resolution, low power, and small size at high speed. The proposed ADC optimizes power consumption and chip area at the target resolution and sampling rate based on a three-step pipeline architecture. The input SHA with gate-bootstrapped sampling switches and a properly controlled trans-conductance ratio of two amplifier stages achieves a high gain and phase margin for 12b input accuracy at the Nyquist frequency. A signal-insensitive 3D-fully symmetric layout reduces a capacitor and device mismatch of two MDACs. The proposed supply- and temperature- insensitive current and voltage references are implemented on chip with a small number of transistors. The prototype ADC in a 0.18um 1P6M CMOS technology demonstrates a measured DNL and INL within 0.69LSB and 2.12LSB, respectively. The ADC shows a maximum SNDR of 53dB and 51dB and a maximum SFDR of 68dB and 66dB at 120MS/s and 130MS/s, respectively. The ADC with an active die area of $1.8mm^2$ consumes 108mW at 130MS/s and 1.8V.

• Journal of the Korea Computer Graphics Society
• /
• v.16 no.3
• /
• pp.1-10
• /
• 2010

In this paper, we propose a novel noiseless method of BRDF rendering on a GPU in real-time. Illumination at a surface point is formulated as an integral of BRDF producted with incident radiance over the hemi-sphere domain. The most popular method to compute the integral is the Monte Carlo method, which needs a large number of samples to achieve good image quality. But, it leads to increase of rendering time. Otherwise, a small number of sample points cause serious image noise. The main contribution of our work is a new importance sampling scheme producing a set of incoming ray samples varying continuously with respect to the eye ray. An incoming ray is importance-based sampled at different latitude angles of the eye ray, and then the ray samples are linearly connected to form a curve, called a thread. These threads give continuously moving incident rays for eye ray change, so they do not make image noise. Since even a small number of threads can achieve a plausible quality and also can be precomputed before rendering, they enable real-time BRDF rendering on the GPU.

• Journal of Venture Innovation
• /
• v.5 no.3
• /
• pp.41-55
• /
• 2022

The purpose of this study is to investigate the effect of Job Embeddedness of members of small and medium-sized construction companies on turnover intention through organizational commitment, targeting employees of small and medium-sized construction companies located in Seoul, Gyeonggi, and Incheon. The significance sampling method was applied as the sampling method, and the number of cases used in the final analysis was 316, and the input data was processed using the SPSS 20.0 program for statistical analysis. As a result of analysis, First, it was found to have a significant negative(-) effect on the turnover intention in suitability and sacrifice as sub-factors of Job Embeddedness of small and medium-sized construction company members, and the correlation between linkage and turnover intention was not significant. Second, it was found to have a significant positive(+) effect on the organizational commitment in suitability, links and sacrifice as sub-factors of job embeddedness of small and medium-sized construction company members. Third, organizational commitment was found to have a significant negative(-) effect on turnover intention. Fourth, organizational commitment was found to completely mediate the relationship between job commitment and turnover intention. Therefore, it was found that the higher the Job embeddedness of the members of small and medium-sized construction companies, the more influential the turnover intention. This suggests that it can have a negative effect on turnover intention by improving the suitability of values pursued by individual members of the organization, work passion, and attachment to the organization.

• Korean Journal of Ecology and Environment
• /
• v.41 no.4
• /
• pp.499-511
• /
• 2008

The major focus of this study is to evaluate a newly developed stream naturalness index system 'Habitat-riparian Indexing System (HIS).' There have been many studies that have assessed stream naturalness in order to provide information required for restoration. The results of these studies were enough for the purpose of the studies; however, the methodologies were limited especially with respect to rapid measurement and the representation of ecological habitats. Therefore, we derived crucial variables from a popularly utilized method and merged them with other criteria obtained from overseas approaches, resulting in the development of the HIS method. The stability of HIS was evaluated by comparing the results with the Stream Naturalness Index (SNI) of Cho (1997). We monitored 100 stream sites in the Nakdong River system using the two different methods for two sampling periods (spring and autumn), and the results were compared using statistical analyses. The determination coefficients between the index values from two methods were c.a. 0.6 for both seasons, and statistics revealed that HIS had a relatively higher stability, providing index values for stream environments. The results of this work suggest a possibility of the utility of HIS for other stream habitats.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.147-159
• /
• 2000

The NIOSH health hazard evaluation program (HHE program) was created in response to the mandate to determine the toxic effect and potential health hazard of workplace exposure, which is found in Occupational Safety and Health Act of 1970 and the Federal Mine Safety and Health Act of 1977, A primary benefit of HHE program is its ability to provide current health hazard data to employers and employees, which assists them in identifying solutions to occupational health and safety problems in their workplaces, The HHE program also stimulates research in the development and review of sampling methods and diagnostic tests and may prompt additional exposure assesment efforts and toxicological and epidemiological studies. HHE projects also provide human exposure-toxicity data that are used to asses the validity of existing occupational health standards and to support criteria for new standards of recommendation, The HHE request is classified into four categories: 1) category 1: As a administratively invalid, 2) category 2: These are valid requests for which a site visit is not essential to an appropriate response, 3) Category 3 : These are valid requests for which a site visit is necessary for an adequate evaluation, 4) These are valid request which present a complex problem or an opportunity for research, To carry out HHE program one or methods of investigation might be used: 1) direct observation and evaluation of production processes and employee work practices 2) employees exposure level and air contamination level 3) medical test or physical examinations of employees 4) private, confidential interviews with employees 5) review of employer's record of injuries and illness, employee exposure data, medical tests and job histories. After investigation and analysing the data, NIOSH issues a final report, giving finding and recommendation.

• Journal of Korean Biological Nursing Science
• /
• v.15 no.3
• /
• pp.139-146
• /
• 2013

Purpose: The purpose of this study was to identify knowledge and the Need of pathophysiology, perceived connectivity between knowledge of pathophysiology and clinical practice, and confidence and satisfaction with clinical performance by applying the knowledge to clinical practice, and to analyze the correlation between the knowledge, perceived connectivity, and confidence and satisfaction of clinical nurses. Methods: Subjects consisted of 149 clinical nurses who work at 7 general hospitals and 6 university hospitals located in Seoul, Incheon, and Gyeonggi province in Korea. Those who learned pathophysiology during their undergraduate program were recruited by using a convenient sampling. The data were collected between April 23 and May 24 in 2012. Participants responded to self-administered questionnaires about knowledge and the need of pathophysiology, and the perceived connectivity between knowledge and clinical practice, and confidence and satisfaction with clinical performance by applying knowledge to clinical practice. Results: Mean scores of knowledge and the need of pathophysiology were $2.88{\pm}0.34$ and $2.33{\pm}0.39$ each. Scores of knowledge and the need of 3 units such as fluid and electrolyte imbalance, acid-base imbalance, and alterations in the respiratory system were high among 23 units while that of adolescent disorders was the lowest. The mean score of perceived connectivity between knowledge and clinical practice was $7.32{\pm}1.57$, and those of confidence and satisfaction with clinical performance by applying the knowledge to clinical practice were $7.66{\pm}1.66$ and $7.42{\pm}1.67$ respectively. Knowledge of pathophysiology was positively correlated with the perceived connectivity between knowledge and clinical practice, and confidence, and satisfaction with clinical performance. Conclusion: The results indicate that knowledge and the need of pathophysiology in clinical nurses is above average, and that knowledge of pathophysiology is important in promoting perceived connectivity with clinical practice and increasing confidence and satisfaction with clinical performance by applying knowledge to clinical practice.

• Korean Journal of Social Welfare
• /
• v.61 no.3
• /
• pp.55-76
• /
• 2009

This study tested the psychometric properties of the Korean version of the Capacity-to-Consent Screen: K-CCS) scale. A total of 404 South Korean older adults were e Cruited using the purposive sampling method. The participants were asked to res-Cod to a structured questiConaire which included older adults' characteristics, ADLs, IADLs, cognitive impairments and creen: K-CCS) scale. A total of. Item analysis, explonalory factor analysis(EFA), and ) sfirmalory factor analysis(CFA) were cCoducted to verifK-Che psychometric properties of the Korean Version of CCS. The sample was divided into two groups: one group for EFA(n=202) alysis(Eois(r group for CFA(n=202). The totults revealeysisae. he final version of the 8-item K-CCS with two dimensions had a excellent internof. Itemstencyonofpha value=.f) alysa CFA) sfirmed the acceptaas diviof the modef.fdi(RMSEA=.057, NNFI=.f4, IFI=.f6, CFI=.f6) to twaddition, claims for the convergent and criterion-related validdiviwere demItetnaled. Ity-tnclusion, the K-CCS can be rmed for professi sams to asersioolder participants' capacity to consent to clinical or survey research.

• Korean Journal of Adult Nursing
• /
• v.25 no.4
• /
• pp.409-421
• /
• 2013

Purpose: This qualitative study was designed to explore and describe the nursing staff reported experiences of managing the medical needs of nursing home residents in South Korea. Methods: Using a focus group interview method, qualitative data were collected from March to May 2012. Twenty five registered nurses and nurse aids working in nursing homes were recruited through a convenient sampling method. Participants participated in one of four focus group interviews lasted up to two hours in which their day-to-day experiences of taking care of the medical needs of the elderly residents. All interviews were recorded and transcribed in verbatim, and analyzed according to the qualitative thematic analysis method using MAXQDA software. Results: The overriding theme was 'experiencing differences between the requirements of the regulatory system and the actual reality of the work place.' The findings of differences between what were true and what is required was based in four subcategories. The nursing home residents had far more medical needs than what were reported. Another finding was that the family members were seen as non-supportive and negligent towards the residents. Conclusion: The findings of the study support the need for changes in the regulatory system. The regulatory limitations of current system with a shortage of resources pushed the participants to experience discrepancies between the required regulation and the reality. Additional research could contribute more exemplars to support changes.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.73-76
• /
• 2010

A two-facet approach was used to investigate the parametric performance of functional high-speed DDR3 (Double Data Rate) DRAM (Dynamic Random Access Memory) die placed in different types of BGA (Ball Grid Array) packages: wire-bonded BGA (FBGA, Fine Ball Grid Array), flip-chip (FCBGA) and lead-bonded $microBGA^{(R)}$. In the first section, packaged live DDR3 die were tested using automatic test equipment using high-resolution shmoo plots. It was found that the best timing and voltage margin was obtained using the lead-bonded microBGA, followed by the wire-bonded FBGA with the FCBGA exhibiting the worst performance of the three types tested. In particular the flip-chip packaged devices exhibited reduced operating voltage margin. In the second part of this work a test system was designed and constructed to mimic the electrical environment of the data bus in a PC's CPU-Memory subsystem that used a single DIMM (Dual In Line Memory Module) socket in point-to-point and point-to-two-point configurations. The emulation system was used to examine signal integrity for system-level operation at speeds in excess of 6 Gb/pin/sec in order to assess the frequency extensibility of the signal-carrying path of the microBGA considered for future high-speed DRAM packaging. The analyzed signal path was driven from either end of the data bus by a GaAs laser driver capable of operation beyond 10 GHz. Eye diagrams were measured using a high speed sampling oscilloscope with a pulse generator providing a pseudo-random bit sequence stimulus for the laser drivers. The memory controller was emulated using a circuit implemented on a BGA interposer employing the laser driver while the active DRAM was modeled using the same type of laser driver mounted to the DIMM module. A custom silicon loading die was designed and fabricated and placed into the microBGA packages that were attached to an instrumented DIMM module. It was found that 6.6 Gb/sec/pin operation appears feasible in both point to point and point to two point configurations when the input capacitance is limited to 2pF.