• 대한안전경영과학회지
• /
• 제7권2호
• /
• pp.57-64
• /
• 2005

Prescribed according to the occupational safety and health low noise measurement method was changed to personal sampling in the method to measure an area noise. Such method had the limit which did not evaluated characteristic of sound of occurrence and the place of origin. This study was peformed to establish an engineering remedy of the work-place noise. The subject was a vibration control process of the place of business in Pusan. A simulation program applied for an engineering improvement of the work-place noise. The results were as follows: 1. An noise occurrence level of the work-place before improvement was $88^{\sim}97dB(A)$, We applied an improvement method to be established and were expected to $80^{\sim}l19dB(A)$, 2. The level of the noise-distribution to appear in the place of origin of the work-place before improvement was $90^{\sim}93dB(A)$ but, We executed the simulation after applied an engineering remedy and predicted $80^{\sim}85dB(A)$. A result of the simulation blue part was changed mostly into the dark blue color. The results suggest that simulation program establishes an engineering remedy and is useful to the case to apply.

• 한국환경보건학회지
• /
• 제41권6호
• /
• pp.369-379
• /
• 2015

Objectives: The lack of reliable information on environmental pollution and health impacts related to asbestos contamination from abandoned mines has drawn attention to the need for a community health study. This study was performed to evaluate asbestos-related health symptoms among residents near abandoned asbestos mines located in the Chungcheong Provinces. In addition, exposure assessment for asbestos is needed although the exposure to asbestos was in the past. Methods: Past exposure to asbestos among inhabitants near abandoned asbestos mines was estimated by using surface sampling of deposited dust in indoor and outdoor residences. A total of 54 participants were divided into two groups with (34 cases) and without (20 controls) diseases related to asbestos. Surface sampling of deposited dust was carried out in indoor and outdoor residences by collecting 105 samples. Deposited dust for sampling was analyzed by polarization microscope (PLM) and scanning electron microscope?energy dispersive x-ray spectrometer (SEM-EDX) to detect asbestos. Subsequently, the elements of the deposited dust with asbestos were analyzed by SEM-EDX to assess the contribution of sources such as abandoned mines, slate and soil. Results: Among the 105 samples, asbestos was detected by PLM in 29 (27.6%) sampling points, and detected by SEM in 56 (48.6%) sampling points. Asbestos in indoor residences was detected by PLM in four sampling points, and by SEM in 12 sampling points. Asbestos detection in indoor residences may be due to ventilation between indoors and outdoors, and indicates long-term exposure. The asbestos detection rate for outdoor residences in the case group was higher than that in the control group. This can be explained as the case group having had higher exposure to asbestos, and there has been continuous exposure to asbestos in the control group as well as the case group. Conclusion: Past residential asbestos exposure may be associated with asbestosis among local residents near abandoned asbestos mines. Odds ratios were calculated for asbestos detection in outdoor residence by logistic regression analysis. Odds ratio between asbestos detection and asbestosis pulmonum was 3.36 (95% CI 0.90-12.53) (p=0.072), adjusting for age, sex, smoking status and work history with multi-variable logistic regression by PLM analysis method.

• Journal of the Korean Statistical Society
• /
• 제29권1호
• /
• pp.45-62
• /
• 2000

Rotation design is a sampling technique to reduce response burden and to estimate the population characteristics varying in time. Park and Kim(1999) discussed a generation of one-level rotation design which is called as {{{{r_1^m ~-r_2^m-1}}}} design has more applicable form than existing before. In the structure of {{{{r_1^m ~-r_2^m-1}}}} design, we derive the exact variances of generalized composite estimators for level, change and aggregate level characteristics of interest, and optimal coefficients minimizing their variances. Finally numerical examples are shown by the efficiency of alternative designs relative to widely used 4-8-4 rotation design. This is continuous work of Part Ⅰ studied by Park and Kim(1999).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3139-3143
• /
• 2007

The objective of this paper was to investigate the mixing characteristics of an three-stage inline coagulant mixing system experimentally. Wastewater samples of pH 8.5 and initial turbidity 1,000NTU were taken from a site of tunneling work. At the constant dosage, 0.36mL/L, of polymer as coagulant aids, the coagulation efficiency with the dosage of PAC as coagulant was about 4${\sim}$6% at 10 minutes after sampling. In the case of 2 different velocity gradient conditions, the efficiency of turbidity removal was increased about 6.5${\sim}$8% with increasing the dosage of coagulant while, the efficiency was increased about 20${\sim}$21.5% with increasing the dosage of coagulant aids. The efficiency of turbidity removal with the settling time after sampling was about 90% after 1 minute, and the efficiency was about 95% after 5 minutes.

• Smart Structures and Systems
• /
• 제16권6호
• /
• pp.1147-1167
• /
• 2015

Wireless smart sensors, which have become popular for monitoring applications, are an attractive option for implementing structural control systems, due to their onboard sensing, processing, and communication capabilities. However, wireless smart sensors pose inherent challenges for control, including delays from communication, acquisition hardware, and processing time. Previous research in wireless control, which focused on semi-active systems, has found that sampling rate along with time delays can significantly impact control performance. However, because semi-active systems are guaranteed stable, these issues are typically neglected in the control design. This work achieves active control with smart sensors in an experimental setting. Because active systems are not inherently stable, all the elements of the control loop must be addressed, including data acquisition hardware, processing performance, and control design at slow sampling rates. The sensing hardware is shown to have a significant impact on the control design and performance. Ultimately, the smart sensor active control system achieves comparable performance to the traditional tethered system.

• 웰빙융합연구
• /
• 제3권2호
• /
• pp.1-11
• /
• 2020

Purpose: We explore to find out and analyze the direct influence of Millennial Orientation on Goals Mediated by work engagement and satisfaction. And, interaction cannot be a direct relationship between research variables. Method: The implementation uses the survey method. This research was conducted at PT. East Kalimantan fertilizer operated in Bontang, East Kalimantan. The population in this study were all employees of PT. East Kalimantan fertilizers operated in Bontang, as many as N = 500 people. The sampling technique used is proportional stratified random sampling. Findings: Millennial orientation influences engagement, job satisfaction and intention to leave, direct engagement has a significant effect on job satisfaction and intention to leave, and job satisfaction is directly related to intention to leave. Originality: Alignment between millennial goals in encouraging job satisfaction and employee engagement, so that it can have an impact on the intention to leave employees, especially at PT. Pupuk. Kaltim. Also, direct millennials as decreasing intention to leave.

• Wind and Structures
• /
• 제8권1호
• /
• pp.13-34
• /
• 2005

This paper presents an analysis of wind velocity and pressure data obtained in a rural environment with a view to identifying the vortex structures present within the flow and examining the relationship between pressure and dynamic pressure. The data is analysed using both conventional analysis and conditional sampling. A method examining the eigenvalues of a matrix formed by the addition of the square of the strain tensor and the square of the vorticity tensor is also investigated. This method illustrates that there are a number of vortex structures present in the flow. The work presented in this paper suggests that the extreme events occur as a result of the superposition of two independent mechanisms.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.160-163
• /
• 2000

In this paper, we propose an efficient technique to minimize the input offset of a dynamic latch comparator. We analyzed offset due to charge injection mismatching and unwanted positive feedback during sampling phase. The last one was only considered in the previous works. Based on the analysis, we proposed a modified dynamic latch with initialization switch. The proposed circuit was simulated using 0.65$\mu\textrm{m}$ CMOS process parameter with 5v supply. The simulation results showed that the input offset is less than 5mv at 200㎒ sampling frequency and the input offset is improved about 80% compared with previous work in 5k$\Omega$ input resistance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.934-938
• /
• 2000

This paper presents a laser cutting of 2D image. 2D image in pixel graphic format is converted into vector graphic image by image processing. Bitmap graphics are made easily, but can not being used in application works for geometry transition. The Sobel's Edge detection method is used to find boundary points on 2D image. The points are fitted into curves with sampling and filtering. Sampling can provide efficient computation and filtering reconstuct features in image. The NC code is generated on MURBS curve of the points. Also, the offset of contour and cutting conditions are considered.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.549-549
• /
• 2000

In the previous work, we dealt with a traffic analysis of network-based control system and its architecture using the CAN protocol. It is difficult to determine an optimal network architecture for a specific system. In this paper, we propose the architecture of network-based control system applicable to a specific AGV system with manipulator arms. We define the fixed number of periodic messages to be occurred in this system. In the proposed system architecture, we analyse its traffic for the real-time communication of all messages, determine the optimal sampling period of an analog sensor to be satisfied with the required specification and the number of possible sensors to be added through simulation.