• Journal of the Korean Society of Safety
• /
• v.24 no.5
• /
• pp.77-83
• /
• 2009

The manufacturing industry is the one with the most frequent industrial disasters, and it is important to study the safety climate recognized by workers in the industry in order to actively prevent industrial accidents. However, little research has been performed on the safety climate in workplaces felt by the workers in the manufacturing industry. The purpose of this study is to identify the factors affecting work environment safeness based on practical analysis via survey, and to establish the relation between safety performance factors and safeness of work environment. The survey was performed for workers in the manufacturing industry(n=228), and structural equations model analysis by using the AMOS 7.0 was performed in order to identify the fit of the research model and the causation among factors. According to the results of the analysis, the reliability and the model fit were appropriate for interpretation, and safety participation was shown to affect safeness of work environment more than safety compliance. The results of this study may serve as the reference for taking a measure to improve the level of safeness of the work environment felt by workers in the manufacturing industry.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.102-107
• /
• 2006

Construction accidents have not decreased in spite of much effort such as new work methods, education and research related to safety works. Specially, many fatal accidents happened in construction works which involve the apartment, building, school, church, hotel, hospital, bank work and the other works. These accidents are mainly caused by unanticipated risk factors. From these reasons, this study researched fatal accidents which happened in construction works during last 13 years($1992{\sim}2004$) and analyzed the input workers and a work period of construction work. According to the input workers and a work period, the results are as following. During 13years($1992{\sim}2004$), the fatal accidents, related to the construction work, were happened to the 1,977 cases. These results were occupied the 21.32% of the total industry accidents. According to the result of the construction, the fatal accident rate of a concrete form work was the highest rate of 16.24% (321 cases) and a temporary work, a steel frame work was the each rate of 12.39%(245 cases), 10.07%(199 cases). Comparing to other work types, the fatal accident rate of those three work types(concrete form work, temporary work, steel work) was represented highly. We surveyed input workers and work period of construction work site. From the result of survey, input workers of a concrete form work were occupied with 13,720. The risk rate of the work type, which was considered input workers and work period, was represented 0.3622(a steel frame work), 0.1142(a temporary work), 0.0782(a tower crane) and 0.0772(a concrete work).

• Safety and Health at Work
• /
• v.10 no.2
• /
• pp.172-179
• /
• 2019

Background: Workers exposed to hazards without adequate protections are at greater risk of injury and illness. Supervisor activities have also been associated with injury risk. We examined the interplay between supervisor safety support and occupational health and safety (OHS) vulnerability on workplace injury and illness. Methods: A survey was administered to 2,390 workers employed for more than 15 hrs/week in workplaces with at least five employees who had a direct supervisor. We examined the combined effects of hazard exposure with inadequate protection (OHS vulnerability) and supervisor support on workplace injury and illness, using additive interactions in log-binomial regression models. Results: OHS vulnerability and lack of supervisor support independently increased the likelihood of physical injuries at work. Crude and adjusted models showed that the risk of physical injury was at least 3.5 times higher among those experiencing both OHS vulnerability and a lack of supervisor support than individuals without OHS vulnerability and with a supportive direct supervisor. Workers who experienced vulnerability were at less risk if they had a supervisor who was supportive. Conclusion: In workplaces where workers experience one or more types of OHS vulnerability, having a supportive supervisor may play an important role in reducing the risk of injury and protecting workers.

• Safety and Health at Work
• /
• v.1 no.2
• /
• pp.158-166
• /
• 2010

Objectives: This study aimed to find gender distinctions in terms of the sociology of the population; to determine work-related factors; to analyze gender differences in daily living, work, sports, and art performances; and to identify gender-related factors that limited performance of daily living and work activities. Methods: A questionnaire was designed that included disabilities of the arm, shoulder, and hand (DASH), accident history, disease history, work duration at current workplace, marital status, job satisfaction, job autonomy, and physical demands of the job. Out of 1,853 workers surveyed, 1,173 questionnaires (63.3%; 987 males, 186 females) included responses to DASH disability and DASH optional work and were judged acceptable for analysis. Results: Upper extremity functional limitation during work and daily living was higher for females than males. The limitations for males increased according to their household work time, accident history, work duration, job satisfaction, physical demand, and job autonomy. Meanwhile, female workers' upper extremity discomfort was influenced by their disease history, job satisfaction, and physical demands. In addition, the size of the company affected male workers' upper extremity function, while marriage and hobbies influenced that of female workers. Conclusion: This study addressed sociodemographic factors and work-related factors that affect each gender's upper extremity function during daily living and working activities. Each factor had a different influence. Further studies are needed to identify the effect that role changes, not being influenced by risks at work, have on musculoskeletal disorders.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.72-77
• /
• 2012

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as earth works, drainage works, pavement works, appurtenant works and etc based on accident examples and investigation on actual condition in roads construction work. In addition, the safety management system was developed to perform risk assessment of construction and use it for effective safety training for labor.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.1-9
• /
• 2004

The chemical factory deals with dangerous element and more advance, human-error analyzes and becomes effective research for the country and region. This paper analysis the form of work-miss on human-error according to a safety accident for domestic chemical factory from 1999-2002. It include the present contents and raise issues human knowledge, behavior, judgment, sensibility as an important counter plan that makes the safety solution of work miss. For the point of view of human knowledge, it takes color standard for works to be effective in work place. For behavior, the test has been for risk Point of work place and infra worker movement, also the workers performed professional work as classify according to work. For judgement, the valuation sheet is reflected to minimize the human-error and the 3rd supervisor does a cross-check audit beforehand. For sensibility, it is applicable for human relations, information, communication by program to the consciousness and an attitude of worker-supervisor.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.33-39
• /
• 2004

The chemical factory deals with dangerous element and more advance, human-error analyzes and becomes effective research for the country and region, this paper analyes the form of work-miss on human-error according to a safety accident for domestic chemical factory from 1999-2002. It include the present contents and raise issues human knowledge, behavior, judgment, sensibility as an important counterplan that makes the safety solution of work miss. For the point of view of human knowledge, it takes color standard for works to be effective in work place. for behavior, the test has been for risk point of work place and infra worker movement, also the workers performed professional work as classify according to work. for judgement, the valuation sheet is reflected to minimize the human -error and the 3rd supervisor does a cross-check audit beforehand. For sensibility, it is applicable for human relations, information, communication by program to the consciousness and an attitude of worker-supervisor.

• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.34-42
• /
• 2011

Death disaster among the disasters in construction field is mainly occurred by crash, and the work plate is the main objects causing crash. This study was performed by interview with workers in construction field to evaluate the consciousness on safety and to analyze the type of use and the state. Finally the problems while using work plate were appeared with its requirements for the improved use. Based on the results from this study, amendments were proposed for some parts of regulation related, and further four types of development on the safe work plate were presented. It is expected that the safer construction environment could be composed by using the results.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.73-80
• /
• 2011

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as foundation, erection, pier, pier upper and etc based on accident examples and investigation on actual condition in bridges construction work. In addition, the safety management system was developed to perform risk assessment of construction and use it for effective safety training for labor.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.2
• /
• pp.11-16
• /
• 2022

When picking up cargo, workers manually load and unload the cargo. Workers have different intensity of work depending on the amount and weight of cargo. In particular, as the intensity of manual work increases, workers are exposed to cumulative traumatic diseases. A manual for picking safety work for workers cargo handling in the distribution center is required. In this study, the worker's picking safety work based on the cargo volume and weight was presented as an experimental design model. Like the research results, the disease begins when the worker feels the number of pains presented by the model.