• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.657-662
• /
• 2005

In this study, the deposition of micrometer-scale metallic interconnects on LCD glass for the repair of open-circuit type defects is investigated. Although there had been a few studies Since 1980 s for the deposition of metallic interconnects by laser-induced chemical vapor deposition, those studies mostly used continuous wave lasers. In this work, a third harmonic Nd:YLF laser (351nm) of high repetition rates, up to 10 KHz, was used as the illumination source and $W(CO)_6$ was selected as the precursor. General characteristics of the metal deposit (tungsten) such as height, width, morphology as well as electrical properties were examined for various process conditions. Height of the deposited tungsten lines ranged from 35 to 500 nm depending on laser power and scan speed while the width was controlled between $3\~50{\mu}$ using a slit placed in the beam path. The resistivity of the deposited tungsten lines was measured to be below 1 $O\cdot{\mu}m$, which is an acceptable value according to the manufacturing standard. The tungsten lines produced at high scan speed had good surface morphology with little particles around the patterns. Experimental results demonstrated that it is likely that the deposit forms through a hybrid process, namely through the combination of photolytic and pyrolytic mechanisms.

• Tribology and Lubricants
• /
• 제36권4호
• /
• pp.215-231
• /
• 2020

The paper presents extensive survey and review of experimental and analytical researches on fluid film bearings and squeeze film dampers (SFDs) for turbomachinery available in open literature (major archival international journals) published recently (2018 and 2019 only). Over 60 published research works are reviewed based on the research topics and objectives, the types of bearings, size of bearings, and main design parameters with a brief summary of experiments and/or predictions in each work. Some important findings and general observations about the experimental and/or predictive data are also presented. There are several major trends observed throughout the survey. A large portion of the papers focuses on bearing surface textures and effect of operating and assembly conditions on static and/or dynamic forced performances, as well as bearing surface roughness and wear patterns. Researches on geometry of orifices and recesses in hydrostatic (or hybrid) bearings, as well as bearing system stability predictions using thermohydrodynamic analysis and computational fluid dynamics (CFD), are considered as significant topics. Studies on SFDs mainly focus on experimental identification of force coefficients for various SFD geometries and sealing conditions. Reliable experiments of fluid film bearings and SFDs along with the development of experimentally benchmarked predictive tools enable reinforcement of the path for reliable implementations of the bearing components into high performance rotating machinery operating at extreme and harsh conditions. The extensive list of sources of recent experiments in the available open literature is a welcome addition to the analytical community to gauge the accuracy of predictive tools.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.136-136
• /
• 2003

In fiber optic networks, system size and cost can be significantly reduced by development of optical components through planar optical waveguides. One important step to realize the compact optical devices is to develop planar optical amplifier to compensate the losses in splitter or other components. Planar amplifier provides optical gain in devices less than tens of centimeters long, as opposed to fiber amplifiers with lengths of typically tens of meters. To achieve the same amount of gain between the planar and fiber optical amplifier, much higher Er doping levels responsible for the gain than in the fiber amplifier are required due to the reduced path length. These doping must be done without the loss of homogeniety to minimize Er ion-ion interactions which reduce gain by co-operative upconversion. Sol-gel process has become a feasible method to allow the incorporation of Er ion concentrations higher than conventional glass melting methods. In this work, Er-doped $SiO_2$-A1$_2$ $O_3$ films were prepared by two different method via sol -Eel process. Tetraethylorthosilicate(TEOS)/aluminum secondary butoxide [Al (OC$_4$ $H_{9}$)$_3$], methacryloxypropylcnethoxysaane(MPTS)/aluminum secondary butofde [Al(OC$_4$ $H_{9}$)$_3$] systems were used as starting materials for hosting Er ions. Er-doped $SiO_2$-A1$_2$ $O_3$ films obtahed after heat-treating, coatings on Si substrate were characterized by X-ray din action, FT-IR, and N-IR fluorescence spectroscopy. The luminescence properties for two different processing procedure will be compared and discussed from peak intensity and life time.

• 인터넷정보학회논문지
• /
• 제6권3호
• /
• pp.55-70
• /
• 2005

이동 통신망 환경에서 이동 호스트에게 멀티캐스트 서비스를 제공하기 위한 방안으로 본 논문에서는 기존의 Xcast++를 계층적 구조를 갖도록 화장한 HXcast++를 제안하였다. 이동 호스트들을 대신하여 DH(Designated Router)이 그룹에 가입하도록 함으로써 이동 호스트의 위치와 상관없이 최적화된 경로로 서비스를 받을 수 있도록 하였으며, 계층적 개념을 도입하여 빈번한 핸드오프로 인한 유지비용을 줄일 수 있도록 하였다. 핸드오프 시 IGMP Membership Query를 기다림 없이 즉각 그룹에 가입할 수 있는 GMA(Group Management Agent)기반 그룹 관리 메커니즘을 제안하였고, 핸드오프 시 발생하는 다량의 패킷손실을 줄이기 위해 Layer 2 Mobile Trigger를 이용하는 fast handoff 기법을 적용하였다. 그룹 가입 지연 동안 발생할 수 있는 패킷 손실은 buffering&forwarding 기법을 이용하여 손실을 줄였다.

• Management Science and Financial Engineering
• /
• 제16권2호
• /
• pp.81-97
• /
• 2010

Trust is one of the most important aspects of the relationship between retailers and consumers in e-commerce. Users may have concerns about transaction security or personal information leakage when they engage in transactions over the Internet. It can be difficult to attract customers if the retailers or service providers cannot establish trust with their customers. There have been many studies of trust-building mechanisms between customers and e-storefronts. However, little work has been done on identifying the relationships between customer satisfaction, purchase intention, and trust. In addition, trust building occurs in the pre- and post-purchase phases of an e-commerce transaction, as well as gradually over repeated transactions. Thus we distinguish between cue-based trust and experience-based trust. The objective of this study was to explain the impact of trust on customer satisfaction and purchase intention in relation to e-commerce sites from the perspective of a multi-dimensional concept of trust. We surveyed 350 undergraduate students and obtained 331 responses for analysis. The result of our analysis showed that cue-based trust has a positive relationship with trust based on experience. Although the two concepts of trust have positive relationships with satisfaction, the path coefficient of trust based on experience was higher than that of cue-based trust. In addition, the purchase intention mediates the relationship between cue-based trust and experience-based trust.

• 한국의료질향상학회지
• /
• 제4권2호
• /
• pp.210-221
• /
• 1997

Background : Willingness to satisfy patients(WSP) among nurses is essential to promoting patient satisfaction which is a critical component in the quality of health care and its outcomes. This study was carried out to empirically find out the affecting factors of WSP among nurses in hospital settings. Methods : The model contains seven job relating determinants and two intervening variables as follows: i) job relating variables of professional status, task requirements, pay, physician-nurse interaction, nurse-nurse interaction, organizational policies, and autonomy, ii) intervening variables of job satisfaction and organizational commitment. Data were collected from 205 nurses in two general hospitals owned by one foundation located in Pusan, Korea, using a structured and self-administered questionnaire. Results : The major results were as follows: First, the results of ANOVA on WPS by personal characteristics showed a statistically significant relationships between WPS and hierarchical orders(p<.01) ana tenure(p<.10). Comparing with the lower orders and shorter tenure, the higher orders and the longer tenure showed better WPS. Second, the results of simple correlation analysis between WPS and determinants and intervening variables showed the following variables, in order of importance, were statistically significant(p<.01): work satisfaction(+), organizational commitment(+), task requirements(+), nurse-interaction(+), professional status(+), physician-nurse interaction(+). Third, the results of path analysis showed that two intervening variables of job satisfaction and organizational commitment, and three determinants of task requirements, professional status, and nurse-nurse interaction had a positively significant direct effect to WPS. Conclusion : The results suggest that nurses who are more satisfied with task requirements, status, nurse-nurse interaction, overall job satisfaction, and organizational commitment, will behave in ways that patients find more satisfied.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.122-130
• /
• 2018

국제 해사 기구의 선체 보호 도장 기준이 의무화됨에 따라 조선소에서는 칼라 플레이트의 모서리 부분에 대해 2R 또는 3-pass 밀링 가공을 수행해야 한다. 그러나 기존 수작업 방식에 의존하고 있는 상황에서 2R 또는 3-pass 밀링 가공을 수행한다면 작업 환경 및 생산성 측면에서 많은 문제점이 발생할 것으로 예상된다. 따라서 규정을 만족할 수 있는 모서리 밀링 자동화 시스템을 개발하여 이러한 문제점을 해결할 필요가 있다. 본 연구에서는 표준 칼라 플레이트를 대상으로 모서리 밀링 자동화 시스템 기본 설계를 수행하였고, 형상 인식 및 가공 경로 생성 알고리즘을 적용하여 가공 프로세스를 정립하였다. 또한, 운영 소프트웨어를 구축하고, 전용 가공 툴을 제작하여 밀링 테스트를 수행한 결과를 토대로 적합한 밀링 가공조건을 도출하였다. 향후, 본 연구를 통해 개발된 모서리 밀링 자동화 시스템을 조선소에 도입하여 현장 테스트를 수행하고, 그 결과를 토대로 상용화 연구를 진행한다면 선체 보호 도장 기준을 충족할 수 있는 자동화 시스템을 구축함과 동시에 생산성 향상을 기대할 수 있다.

• 대한한의정보학회지
• /
• 제17권1호
• /
• pp.69-145
• /
• 2011

Characteristics Regarding Xiang Yao (Hyang Yag) Jiu Ji Fang Life Saving Local Botanical prescriptions in Medical Research Xiang Yao Jiu Ji Fang is Korea's most ancient extant medical manuscript. It was first published between 1232 and 1251 during the Goguryeo period (Gao Zong) by the (Jianghuadao Da Cang Du Jian) Great Storage Depository Under Capital Supervision. The entire work is divided into three scrolls named the front, middle and back parts. There is also an appendix titled Fangzhong Xiang Yao Mu Cao Bu 'Catalogue of Medicines in the Local Botanicals prescriptions' in one volume. The contents comprise discussion of internal medicine diseases, external medicine diseases, commentaries on sexually transmitted diseases, diseases caused by parasites and bugs, diseases of the five orifices, gynecological diseases and pediatric diseases, in all totaling fifty three types of disease. The prescriptions record 180 types of xiangyao or hyang yag-local botanicals representing the beginning of an independent Korean path of development. Owing to the development during the Goguryeo period of medical material left to us by history, investigation and research in the area of hyang yag local botanicals has bequeathed us methods used in the contemporary period. Through the related comprehensive annotated explanatory notes and documents, much analysis and discussion is taking shape.

• Safety and Health at Work
• /
• 제11권3호
• /
• pp.347-352
• /
• 2020

Background: Low self-esteem can be an issue among health-care workers due to the hierarchical medical system. Health-care workers are also in a high pressure environment that can lead to stress and burnout. This study was conducted to estimate the proportion of health-care workers with low self-esteem, high stress, and burnout and the factors associated with these in a private hospital in Bangalore city. Methods: This cross-sectional study included a random sample of health-care workers of various cadres - doctors, nurses, nursing aides, technicians, and workers in ancillary departments such as laundry, dietary, central sterile supply department, and pharmacy, with probability proportional to size. Rosenberg Scale for Self-esteem, Cohen's Perceived Stress Scale, and Shirom-Melamed Burnout Measure were used as study tools. Results: Among the 306 health-care workers, there were high levels of low self-esteem (48.4%), stress (38.6%), and burnout (48.7%), with the lowest levels being among doctors. Those aged younger than 30 years had significantly lower self-esteem and greater stress. Conclusions: Health-care workers with low self-esteem were nearly thrice more likely to suffer high stress, Odds Ratio (OR) = 2.84 (1.36-5.92), and those who were stressed had more than three times higher chance of experiencing burnout, OR = 3.6 (2.02-6.55). Path analysis showed that low self-esteem among health-care workers had a direct effect on burnout, as well as an indirect effect through stress (mediator variable). This study indicates the need for screening and counseling for low self-esteem, stress, and burnout as part of a periodic medical examination of all cadres of health workers.

• 디지털융복합연구
• /
• 제12권12호
• /
• pp.345-350
• /
• 2014

다양한 모바일 단말을 활용한 스마트 워크에 대한 수요 증가 및 클라우드, 웨어러블 컴퓨팅, 차세대 유 무선 통신망 등과 같은 융합형 인프라 기반의 서비스 증가에 따라 네트워크의 신뢰성이 매우 중요한 문제로 대두되고 있다. 그러나, 아직까지 이러한 융합형 인프라 기반의 서비스 제공 시 네트워크의 신뢰성을 제공하는 방안에 대한 연구는 거의 이루어지지 않고 있다. 따라서, 본 논문에서는 이러한 문제를 해결하고 클라우드 기반 사무환경 구축시 적용할 수 있는 ISNTC (Intelligent Safe Network Technology based on Cloud)를 제안한다. 제안하는 ISNTC는 SDN (Software Defined Network) 기반의 세이프 네트워크 기술을 활용하여 사용자 데이터를 전송하는 방식이며, 동기화된 전송 경로 및 전송 타이밍을 통해 안전한 데이터 전송을 보장한다. 제안한 ISNTC의 성능 평가는 OPnet 기반의 시뮬레이션을 통해 이루어졌으며, 이를 통해 제안한 방안의 우수성을 검증하였다.