• Journal of the Korean Arthroscopy Society
• /
• v.5 no.1
• /
• pp.32-35
• /
• 2001

Purpose : To evaluate the efficacy of arthroscopic management of the triangular fibrocartilage complex(TFCC). Materials and Methods : Thirteen patients(14 wrists) with acute or chronic traumatic triangular fibrocartilage complex lesions were included in the study. The mean patients' age was 28.3 years, with a range of 21 to 45 years. All patients were diagnosed by physical examination, arthrographic or magnetic resonance imaging studies. Eight of the 14 wrists had central TFCC tear while 6 wrists had peripheral tear. Under arthroscopic control, injuries to the central portions were treated by debridement and excision of unstable tissue fragment while peripheral tears were repaired. The follow-up period averaged 28 months. The results were analyzed clinically using the Mayo modification of the Green and O' Brien wrist scoring system. Results : Nine of the 14 wrists were rated excellent,3 good and 2 fair Overall, 12 of the 14 patients rated as satisfactory and returned to sports or work activities. Conclusion : Arthroscopic treatment of TFCC resulted in a high degree of patient satisfaction and an increase in the ability to perform at workshop.

• Environmental Analysis Health and Toxicology
• /
• v.15 no.1_2
• /
• pp.19-29
• /
• 2000

Acetanilide may be released into the environment through air and wastewater from its production and use sites as an intermediate in the synthesis of pharmaceuticals and dyes. Acetanilide is biodegraded rapidly under aerobic conditions and decomposed by indirect photolysis in the presence of OH radicals. An estimated bioconcentration factor of 4.5 suggests that bioaccumulation in aquatic organisms is low. Ecotoxicological data on acetanilide exist on acute toxicity to fishes of 4 species only. According to the EUSES system, the lowest PNEC (Predicted no effect concentration) in fishes is 0.01 mg/1 and PEC (Predicted environmental concentration) for surface water on a regional scale is 9.1$\times$10$\^$－5/mg/l as the worst case. RCR (Risk characterization ratio) of acetanilide for surface water on a regional scale was estimated as 9.1$\times$10-3, which is safe enough for fishes, RCR on a local basis slightly exceeds the value 1 in water and sediment; that is, 1.3 and 1.6, respectively, which suggests the existence of ecotoxicological risk at the vicinity of the manufacturing site. For the refinement of environmental risk assessment on acetanilide, more data should be collected regarding prolonged fish toxicity, acute toxicity toward daphnia and algae. It is, therefore, recommended that acetanilide should be a candidate for further work to supplement the lacking data until it is proved to be safe in the ecotoxicological aspects.

• Journal of the Korean Society for information Management
• /
• v.30 no.4
• /
• pp.265-281
• /
• 2013

The early history of foreign Protestant missionaries in Korea has begun in the late 19th century, when they came to work as professionals such as teachers, medical doctors, etc. as the nation opened its door to western culture with the fall of national isolationism. Their records are considered crucial resources that enable us to shed new light on modern Korean history, politics, economy and society beyond mere religious value. Despite the recognition of such historic value of early missionary resources, however, there has been serious lacking of a systematic attempt to develop policies and plans for making it easy to collect, preserve and access the resources. Up to date, the records of early Protestant missionaries, in diverse forms of mission reports, books, periodicals, personal diaries, letters and photos, are scattered around various places, including their home country churches, governments, libraries, museums, research institutes and homes. Therefore, this research aims at providing basic resources on the archival status of early Protestant missionaries in Korea, needed for developing a sustainable and systematic digital archive system, through the investigation of early foreign missionaries' resources and in-depth interviews of experts. The study covers the period of 1800s to 1910, that is from the beginning of Protestant missionaries entering into Korea until the start of the Japanese annexation in 1910.

• Journal of the Korean Society of School Health
• /
• v.11 no.1
• /
• pp.111-121
• /
• 1998

This is the study to the effect that the problems of the protective institution where the whole health of school is performed should be solved for the purpose of much more effective school business after investigating the situations of the management about health system in the elementary school of seoul city The subjects of the research are five students of the school which practices health class in the protective institution, five students of the school which puts health class to practice in each classroom and five nursing teachers who work for each elementary school Its data resulted from that from July to September 1997, I visited five schools in person at Kang nam ku, Dong chak ku, Yong san ku, Kwan ak ku, Kang dong ku and then I met and talked with the nursing teacher and the children Through this inspection and interpretation, I could figure out such things as follows. 1 The structure of the nursing room is so small that it has quite a few things inconvenient for the children and the nursing teacher to use together So for the sake of the health in school, first of all, Its size has to be larger 2. The name as the protective institution has to be changed into the health room. And the room for rest cure, dressing room, counselling room and the room for the health education should be equipped with the inside of health room 3 The nursing teacher as a health teacher has to carry out the health class at a health room. 4 It was required that the principal and the Ministry of Education should be highly interested in the health of school In particular, the advice for instructing expert agents about the health and the cooperation of the principal was urgently demanded. Through the result above, the health of school will be accomplished not only in first-aid treat and injection but also in the education about health as a main duty And the nursing teacher also can play a role as a teacher for health fully The programming, practice and estimation of the health room of the business for health in school will be feedback.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.4
• /
• pp.708-720
• /
• 2012

The main aim of paper is to analyse relationships of objects, methods and main agents for the sustainable growth of community business (CB). Since the 1990s, Korea central-local governments have carried out a variety of policies to revitalize the rural economy, but many policies did not work effectively. The main reason for this is that those policies were simply focused on construct the hardware-based infrastructure without considerations of community capabilities. Recently, to overcome these problems, various kinds of community business policies are carried out across the country. Therefore, to avoid previous problems, the concrete and thorough analysis on the current CB has to be required. To do this analysis, four case studies on Sungmisan Village (in Mapo-Gu, Seoul) were taken and analysed in this paper. Results for this are as follows; Firstly, for the sustained growth of CB, it has to be required that the needs and demands of communities and residents are reflected. In the case of Sungmisan CB, residents were relatively satisfied with their community products, even though tastes and prices of those products were not very attractive. The reason for this is that those products were created by needs of local people. In this process, a market within the village was created and the basis of the management was established. Secondly, in order to secure a stable profit's structure that is necessary at the early stage of business settlement, creating related networks with Sungmisan CB is necessary. The CB established a stable profit structure by using mutual commodities. In particular, they linked closely and mutually so that visitors can buy their commodities. Lastly, for the sustainable management of the CB a common target local people should be set up. Furthermore, a system for income distribution has to be needed for protecting and solving potential conflicts.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4678-4702
• /
• 2018

Traffic Matrix estimation has always caught attention from researchers for better network management and future planning. With the advent of high traffic loads due to Cloud Computing platforms and Software Defined Networking based tunable routing and traffic management algorithms on the Internet, it is more necessary as ever to be able to predict current and future traffic volumes on the network. For large networks such origin-destination traffic prediction problem takes the form of a large under- constrained and under-determined system of equations with a dynamic measurement matrix. Previously, the researchers had relied on the assumption that the measurement (routing) matrix is stationary due to which the schemes are not suitable for modern software defined networks. In this work, we present our Compressed Sensing with Dynamic Model Estimation (CS-DME) architecture suitable for modern software defined networks. Our main contributions are: (1) we formulate an approach in which measurement matrix in the compressed sensing scheme can be accurately and dynamically estimated through a reformulation of the problem based on traffic demands. (2) We show that the problem formulation using a dynamic measurement matrix based on instantaneous traffic demands may be used instead of a stationary binary routing matrix which is more suitable to modern Software Defined Networks that are constantly evolving in terms of routing by inspection of its Eigen Spectrum using two real world datasets. (3) We also show that linking this compressed measurement matrix dynamically with the measured parameters can lead to acceptable estimation of Origin Destination (OD) Traffic flows with marginally poor results with other state-of-art schemes relying on fixed measurement matrices. (4) Furthermore, using this compressed reformulated problem, a new strategy for selection of vantage points for most efficient traffic matrix estimation is also presented through a secondary compression technique based on subset of link measurements. Experimental evaluation of proposed technique using real world datasets Abilene and GEANT shows that the technique is practical to be used in modern software defined networks. Further, the performance of the scheme is compared with recent state of the art techniques proposed in research literature.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.9-15
• /
• 2012

The purpose of this study was to investigate the effects of the secondary tasks such as sending text message (STM) and searching navigation (SN) on skin conductance level (SCL) and driving performance of relatively aged and high-experienced drivers. The subjects included 26 taxi drivers; 12 males aged $56.3{\pm}4.4$ with $28.4{\pm}6.4$ years of driving experiences and 14 females aged $55.5{\pm}3.5$ with $19.4{\pm}5.0$ years of driving experiences. All subjects were instructed to keep a constant following distance (30m) from the car ahead and a given vehicle speed (80km/h or 100km/h) in a driving simulator. The relative change of SCL, vehicle velocity deviations, and average following distances were measured during driving only and driving with secondary tasks. The relative change of SCL, average following distance, and vehicle velocity deviation were more increased during the driving with secondary tasks than driving only. The relative change of SCL, vehicle velocity deviation, and average following distance were more affected by driving with 100km/hr than 80km/hr of a given vehicle speed. Secondary tasks increased a work load of drivers in term of SCL change, and decreased driving performance in terms of the vehicle velocity deviation and average following distance.

• Journal of Technologic Dentistry
• /
• v.25 no.1
• /
• pp.173-185
• /
• 2003

This study mainly intends to determine the factors for which dental technicians are satisfied with their jobs and how much the resulting job transfer rate is and thus to identify the correlation between them. For these purpose, 200 subjects were sampled out of dental technicians in Seoul and Incheon, and the survey was performed from July 19, 2002 to August 15 (for 25 days) with self-administered questionnaire. Out of all collected questionnaires, 131 pieces(65.5%) were addressed for this study. As for the tools for this study, the structured questionnaire was used with its proven reliability and feasibility, and the contents of questionnaire consisted of 32 questions on the basis of related references. The contents of questionnaire were categorized into 3 sections: General attribute of subjects; Factors for which dental technicians are satisfied with their jobs; and their intention of job transfer. The questionnaire consisted of total 32 questions which included general attribute of subjects(10 questions), factors of their satisfaction with jobs(17 questions) and intention of job transfer(5 questions). The data analysis was processed by computerized system with SPSS(Statistical Package for Social Sciences). Statistical analysis techniques included frequency, percentage, T-test, F-test analysis and regression analysis. As a result of those analyses, the conclusion can be summarized as follows: 1. As a result of analyzing the factors for which the subjects were satisfied with their jobs, it was found that there were significant differences in career and job title out of question items(P<0.001). It was also shown that the factors of subjects' satisfaction averaged 3.43, which was considerably higher value than I expected. It was found that job and management factors were major job satisfaction factors. 2. As a result of analyzing the intention of subjects to decide their job transfer, it was found that there were significant differences in job title and marital status out of question items(P<0.001). It was shown that the total average of the intention of their job transfer amounted to 3.06. It was shown that dental technicians have relatively higher intention of job transfer from their current work place. 3. It was found that there was inverse correlation between the factors of subjects' satisfaction with their jobs and their intention of job transfer(r=-0.490, P<0.05). Likewise, it was also found that there was inverse correlation mostly between the evaluation value for each independent variable region in term of each factor of job satisfaction and the value for the intention of job transfer. In view of these correlations, it was concluded that higher job satisfaction likely led to lower job transfer. 4. As a result of regression analysis so as to determine the influences of job satisfaction factors on the intention of job transfer, it was found that the highest influential factor was management factor. And it was shown that the test values of model were statistically significant and its explanatory power amounted to 54.6%.

• Journal of Distribution Science
• /
• v.16 no.7
• /
• pp.67-75
• /
• 2018

Purpose - In the 21st century, as information technology advances alongside the emergence of the 4th generation, industrial age, industrial environment has become individualized and customized. It is important to hire good quality employees for good service in the industry. The e-learning market is growing every year. Although e-learning companies are finding better quality employees in e-learning, it is not easy to find it. Companies also spend a lot of time and cost to find employee. On the employees side, they want to get a job freely when they want, but they cannot find their job easily. Furthermore, the labor market environment is changing fast. In the 4th generation, industrial age, employers require to find manpower whenever they need and want at little cost. So of their own accord, we have considered the necessity of management of human resources for employees and employers in e-learning. The purpose of this study is to propose a human cloud platform framework for enabling an efficient management of human resources in e-learning industry. Research design, data, and methodology - To pinpoint the items of a human cloud platform framework, the study was initiated according to the following process. First, items of competency relating to e-learning instructional designer was analyzed. Second, based on the items of information from this analysis, selection and validity verification took place with 5 e-learning specialists group. Third, the opinion of experts who were in charge of hiring in e-learning companies were collated with the questionnaire. Lastly, the human cloud platform framework was proposed based on opinion results. Results - The framework was comprised of 7 domains and 27 items in order to develop the human cloud platform for e-learning instructional designer. The analysis results showed that the most highly considered item were 'skill (4.60)' that employee already have the capability. Following this (in order) were 'project type (4.56)', 'work competency (4.56)', and 'strength area of instructional design (4.52)'. Conclusions - The 27 items in the human cloud platform framework were suggested in this study. Following this, we can consider to develop the human cloud platform for finding a job and hiring e-learning instructional designer easily. For successful platform operation, we need to consider reliability between employer and employee. In addition, we need quality assurance system based on operation has public confidence.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.232-239
• /
• 2001

Young Jong Grand Bridge is approach traffic road of New Inchon International Airport which covers hub airport function in northeast asia. The total span length of this bridge is $4,420{\cal}m$ and this main bridge type is, the first in the world, Double Deck Self Anchored Suspension Bridge, designed as double deck systems to be arranged by road and railroad. Approach bridges to be connected with main span also are composed double deck steel truss and steel box girder to consider a continuity with this span. Our company erected $1,375{\cal}m$(about 60,000tons) of double deck steel truss bridge type which is composed by 6 traffic lane on upper deck and 4 traffic lane and Double track railroad on lower deck. The original installation method of this bridge was planed to install about 75 meters bridge blocks to use floating crane, after temporary bent was constructed between permanent piers. But this method which had to construct many temporary bents in the sea had the matter that construction periods can become lengthen and construction cost can be risen. To overcome the uncertainty to ensure high qualify of bridge and economic project execution, our company developed new bridge erection method to assure both quality control and economic construction work. The new erection method which was developed by us was one that could transport and install long bridge block, $120{\cal}m$ unit at a time and that temporary bent was not required. We hope that this paper is used as technical data which will erect bridge in the western sea and others marine region.