• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.958-967
• /
• 2023

This work studies the defect features in a dilute FeMnNi alloy by an Object Kinetic Monte Carlo (OKMC) model based on the "grey-alloy" method. The dose rate effect is studied at 573 K in a wide range of dose rates from 10^-8 to 10^-4 displacement per atom (dpa)/s and demonstrates that the density of defect clusters rises while the average size of defect clusters decreases with increasing dose rate. However, the dose-rate effect decreases with increasing irradiation dose. The model considered two realistic mechanisms for producing <100>-type self-interstitial atom (SIA) loops and gave reasonable production ratios compared with experimental results. Our simulation shows that the proportion of <100>-type SIA loops could change obviously with the dose rate, influencing hardening prediction for various dose rates irradiation. We also investigated ways to compensate for the dose rate effect. The simulation results verified that about a 100 K temperature shift at a high dose rate of 1×10^-4 dpa/s could produce similar irradiation microstructures to a lower dose rate of 1×10^-7 dpa/s irradiation, including matrix defects and deduced solute migration events. The work brings new insight into the OKMC modeling and the dose rate effect of the Fe-based alloys.

• 소성∙가공
• /
• 제14권7호
• /
• pp.635-641
• /
• 2005

The crystal structure of magnesium was hexagonal close-packed (HCP), so its formability was poor at room temperature. But formability was improved in high temperature with increasing of the slip planes. Purpose of this paper was to know about the mechanical properties of magnesium alloy (AZ31B), before warm and hot forming process. The mechanical properties were defined by the tension and compression tests in various temperature and strain-rate. As the temperature was increased, yield·ultimate strength, K-value, work hardening exponent (n) and anisotropy factor (R) were decreased. But strain rate sensitivity (m) was increased. As strain-rate increased, yield·ultimate strength, K-value, and work hardening exponent (n) were increased. Also, microstructures of grains fined away at high strain-rate. These results would be used in simulations and manufacturing factor fer warm and hot forming process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.69-72
• /
• 2005

The crystal structure of magnesium is hexagonal close-packed (HCP), so its formability is poor at room temperature. But formability is improved in high temperature with increasing of the slip planes. Purpose of this paper is to know about the mechanical properties of magnesium alloy (AZ31B), before warm and hot forming process. The mechanical properties were defined by the tension and compression tests in various temperature and strain-rate. As the temperature is increased, yield${\cdot}$ultimate strength, K-value, work hardening exponent (n) and anisotropy factor (R) are decreased. But strain rate sensitivity (m) is increased. As strain-rate increased, yield${\cdot}$ultimate strength, K-value, and work hardening exponent (n) are increased. Also, microstructures of grains fine away at high strain-rate. These results will be used in simulations and manufacturing factor for warm and hot forming process.

• 대한건축학회논문집:구조계
• /
• 제36권3호
• /
• pp.135-145
• /
• 2020

Recently, the disaster rate of the construction industry has increased with high-rise, and complexity of the building, unlike the decrease in the disaster rate in other industries. Although risk assessment is performed to reduce the occurrence of disasters, it is difficult to estimate the risks accurately due to activity in which no disaster has occurred, and inconsistencies in the level of details of work. In this study, in order to evaluate the risk of the major activity for the apartment construction work, the activity was identified by referring to the risk assessment model of construction industry type by the KOSHA. The construction work types and activities were consistently organized in level of work into nine work types and 82 activities were through experts consultation. Analyzing the disaster types that occurred during work through KOSHA disaster cases, calculating the probability of disaster occurrence according to the type of disaster, and combining the probability of disaster with the severity of disaster to estimate the risk assessment method was presented. Using the daily report of the construction site of the apartment, the results of a case study confirmed the validity of the risk calculation method presented in this study.

• 한국산림과학회지
• /
• 제87권2호
• /
• pp.121-130
• /
• 1998

별도작업에서 작업원의 작업강도를 파악하기 위하여, 체인톱을 이용한 낙엽송 간벌작업에서 작업시간과 작업량을 조사하였으며, 작업시 심박수의 변화를 조사하였다. 또한, 작업원의 최대 작업수행 능력을 평가하기 위하여 최대산소섭취량을 조사하였다. 1일 실작업시간은 6시간 6분으로 오전작업시간이 약 3시간 12분, 오후가 2시간 54분으로 나타났고, 전체작업시간 중 실작업시간의 약 90% 정도를 차지하는 것으로 나타났으며, 실작업시간 중 요소작업 의 시간비율은 이동(Movement)의 비율이 평균 26.3%로 가장 큰 값을 보였다. 작업원의 작업량을 분석하기 위하며 시간당 벌목재적을 조사한 결과 평균 $2.62m^3/hr$로 나타났다. 작업원의 작업능력을 평가하기 위하여 최대산소섭취량을 분석한 결과, 평균 $2.42{\ell}/min$($46.5m{\ell}/kg/min$)으로 나타났으며, 작업시 심박수를 바탕으로 체인톱을 이용한 낙엽송 간벌작업 중 실동시간의 작업강도를 분석한 결과, 실동시간의 심박수 증가율은 평균 93.2%로 나타났고, 작업강도지수는 평균41.9%로 나타났다.

• Safety and Health at Work
• /
• 제6권3호
• /
• pp.192-199
• /
• 2015

Background: Overweight, obesity, and cardiovascular disease risk factors are prevalent among firefighters in some developed countries. It is unclear whether physical activity and cardiopulmonary fitness reduce cardiovascular disease risk and the cardiovascular workload at work in firefighters. The present study investigated the relationship between leisure-time physical activity, cardiopulmonary fitness, cardiovascular disease risk factors, and cardiovascular workload at work in firefighters in Hong Kong. Methods: Male firefighters (n = 387) were randomly selected from serving firefighters in Hong Kong (n = 5,370) for the assessment of cardiovascular disease risk factors (obesity, hypertension, diabetes mellitus, dyslipidemia, smoking, known cardiovascular diseases). One-third (Target Group) were randomly selected for the assessment of off-duty leisure-time physical activity using the short version of the International Physical Activity Questionnaire. Maximal oxygen uptake was assessed, as well as cardiovascular workload using heart rate monitoring for each firefighter for four "normal" 24-hour working shifts and during real-situation simulated scenarios. Results: Overall, 33.9% of the firefighters had at least two cardiovascular disease risk factors. In the Target Group, firefighters who had higher leisure-time physical activity had a lower resting heart rate and a lower average working heart rate, and spent a smaller proportion of time working at a moderate-intensity cardiovascular workload. Firefighters who had moderate aerobic fitness and high leisure-time physical activity had a lower peak working heart rate during the mountain rescue scenario compared with firefighters who had low leisure-time physical activities. Conclusion: Leisure-time physical activity conferred significant benefits during job tasks of moderate cardiovascular workload in firefighters in Hong Kong.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.119-124
• /
• 2008

Many automobile assembly workers often do several cycles of tasks continuously, i.e., without breaks, to get a longer break. This is not recommended since the dose of fatigue increases exponetially with time and it takes much longer time to recover. In this study, a laboratory experiment was conducted to investigate the effect of work/rest schedules on workload of a repetitive upper-limb task. Eleven male subjects participated in the experiment, in which simulated screw driving tasks were carried out repetitively with 3 different work/rest schedules: standard breaks(1 cycle of work at a time, 60 20-s breaks), medium breaks(5 cycles of work at a time, 12 100-s breaks), and long breaks(10 cycles of work at a time, 6 200-s breaks). The result showed that medium- and long-breaks schedules significantly increased the level of perceived discomfort and %HRR as compared to the standard-break schedule. The subjects' preference was not statistically different among work/rest schedules, which might be caused from the absolutely low level of workload of the experimental tasks. From the results, it is recommended to have frequent and shorter breaks rather than infrequent and longer breaks to decrease the level of physical workload. A more expanded studies, however, should be carried out to provide more practical safety guidelines on the work practice of continuous working without breaks among automobile assembly workers.

• Safety and Health at Work
• /
• 제14권4호
• /
• pp.445-450
• /
• 2023

Background: The impact of COVID-19 infection on workers' work function persists even after the acute phase of the infection. We studied this phenomenon in Japanese workers. Methods: We conducted a one-year prospective cohort study online, starting with a baseline survey in December 2020. We tracked workers without baseline work functioning impairment and incorporated data from 14,421 eligible individuals into the analysis. We estimated the incidence rate ratio for new onset of work functioning impairment due to COVID-19 infection during follow-up, using mixed-effects Poisson regression analysis with robust variance. Results: Participants reporting infection between January and December 2021 showed a significantly higher incidence of new work functioning impairment (adjusted incidence rate ratio: 2.18, 95% confidence interval: 1.75-2.71, p < 0.001). The formality of the recuperation environment correlated with a higher risk of work functioning deterioration in infected individuals (p for trend <0.001). Conclusion: COVID-19-infected workers may continue to experience work difficulties due to persistent, post-acute infection symptoms. Companies and society must urgently provide rehabilitation and social support for people with persistent symptoms, recognizing that COVID-19 is not just a transient acute infection.

• Architectural research
• /
• 제16권4호
• /
• pp.167-174
• /
• 2014

Smart Work is a way of working independent of time and space restrictions with the help of ICT. For past years, Korea has been promoting Smart Work to boost ICT industry, to overcome low birth rate and population ageing, and to implement Smart Korea. Three elements of Smart Work include people, technology and space. A lot of research has been performed on people and technology for Smart Work. But it is hard to find research on space. In this paper, some representative smart work centers(SWCs) in Korea were selected and analyzed from the perspective of spatial design including general characteristics, personal spaces, group spaces, and support spaces. From this research, it is observed that current SWCs in Korea are good in providing personal work spaces and simple group meeting rooms as well as ICT environments. However, they lack of openness to the public and group spaces to encourage informal communications. It is also observed that personal space plans need to be multi-functional, and that novel supporting spaces are required to improve quality of life and creativity of workers.

• Safety and Health at Work
• /
• 제13권2호
• /
• pp.135-140
• /
• 2022

Background: Coal mining is a hazardous industry. The purpose of the study is to identify the nature of occupational injuries and diseases among coal miners and to determine the factors that affect the rate of injury and duration of time loss from work. Methods: A retrospective cohort study was conducted using accepted workers' compensation claims data of 30,390 Australian coal miners between July 2003 and June 2017. Results: Musculoskeletal and fracture conditions accounted for approximately 60% of claims in all occupational groups. Cox regression analysis showed that older age and female gender were significant predictors of longer time off work. Injury types and occupations were associated with work time loss: mental health conditions, and machine operators and drivers had significantly longer durations of time off work. Conclusion: Future research can further address how these factors led to longer time off work so that coal industry regulators, employers, and healthcare providers can target interventions more effectively to these at-risk workers.