• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.871-875
• /
• 2001

Laser photolithography technique is useful for fabricating micro-patterns of silicon wafers. In this work, the laser photolithography micromachining technique is optimized based on Taguchi method. Sensitivity analysis was performed using laser scanning speed and laser power level as the parameters. The results show that for the photoresist used in this work, a laser scan speed of $70{\mu}m/s$ at 50mW laser power gives the best result.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.182-187
• /
• 2001

This study deals with CARS (Computer Aided ROMUM System) which is a computer version of ROMUM (RObot Modularization of the Unit Motion). ROMUM was a method developed by the concept of modularization of the unit motion of robots. Because CARS is a computer assisted method of menu-driven type for human interface, this method can be easily applied for analyzing the work motion and measuring the execution time of robots. Therefore, it will be helpful for reducing the analysis effort and time of robot work.

• East Asian mathematical journal
• /
• v.14 no.2
• /
• pp.399-410
• /
• 1998

In [3], Franca and Stenberg developed several Galerkin least squares methods for the solution of the problem of linear elasticity. That work concerned itself only with the error estimates of the method. It did not address the related problem of finding effective methods for the solution of the associated-linear systems. In this work, we present computational experiments of W-cycle multigrid method. Computational experiments show that the convergence is uniform as the parameter, $\nu$, goes to 1/2.

• Journal of the Korean Data and Information Science Society
• /
• v.6 no.1
• /
• pp.73-83
• /
• 1995

We construct the approximate bootstrap confidence intervals for reliability (R) when the distributions of strength and stress are both normal. Also we propose percentile, bias correct (BC), bias correct acceleration (BCa), and percentile-t intervals for R. We compare with the accuracy of the proposed bootstrap confidence intervals and classical confidence interval based on asymptotic normal distribution through Monte Carlo simulation. Results indicate that the confidence intervals by bootstrap method work better than classical confidence interval. In particular, confidence intervals by BC and BCa method work well for small sample and/or large value of true reliability.

• Korean Journal of Social Welfare
• /
• v.1
• /
• pp.51-71
• /
• 1979

During last five years several workshops and seminars among social work educators, in and out country, has taken place. In those gatherings there has been, criticism on American model on which curriculum of social work in Korea has mainly based, and many proposals which most developing countries should consider and adopt for developing their own curriculums. The proposals could be summarized as follows; 1. Specification of developmental functions of social work should be made so that the curriculum could involve. It also must come from own societal needs and own national development task. 2. Social work should participate and make contribution to plan and solve the main social problems in own countries. 3. Clarification of educational objective in undergraduate level should be made and one of them must be related to the first professional degree. 4. There should be the courses which provide the content of macro level participation. How much of the proposals are reflected in the current curriculum of Korea? What are the problems Korean social work education has been faced in connection with reflecting the proposals? What kinds of task we should or could perform in order to adopt the proposals? These are the questions which deserved to be studied. The followings are the answers to the questions; 1. The new courses such as social welfare policy and planning, Social Development, Population Dynamics and Family Planning, Social problems, Special Issues in Social Welfare, etc, are placed in the curriculum. 2. Though the new courses are added the courses of case work, group work, and community organization are strongly remained it means that integrative method is not quite adopted and that conflicts are taking place between new and old fashion. 3. Fieldwork placement policy has been changes from concurrent to block and from social work method oriented to social problem oriented. 4. There are lack of integration among the all courses, of consistency between pre and post courses and connection among the related courses. 5. Establishment of image of social worker with B, A. degree should be urgently taken place. It can't be done by social work field alone but by cooperation with all the forces related to the social work practice. 6. B. A. graduate should have a common base of knowledge and competence. It could be come from the clear and specified objectives of undergraduate level education. And agreement among the member schools on the objectives can call on the fundamental similarities in each curriculums. Different programs from one school to another can be tolerated as long as there are fundamental similarities among the schools. Basic concepts and framework of social work should be kept clearly. It is a slow and long process to make social work recognized as a profession in the developing countries. Korea can't be and exception. Failure of having social work be indegenous can't be the reason to refuse an change the basic concepts of social work. One of he most important task which social work education in Korea must achieve in the near future is to establish the minimum requirement courses in the curriculum. Social work field, on the other hand, must find the positions for the social works in the various settings and institute. Clear role and image of social worker can be obtained by doing that.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.2
• /
• pp.145-149
• /
• 2015

Objective: This study aims to analyze qualitatively if PTS methods are applicable to the agricultural works of Korea. Background: Many studies on setting standard time have been performed for manufacturing and service industries, not many studies on agricultural work have been carried out domestically and internationally. Method: MTM, MOST, Work Factor, MODAPTS were applied to some agricultural works, and limitations of each method were found out. Results: MTM was found to be more applicable than other methods, except for mental works. Conclusion: In general, many Korean agricultural works need squat postures, which are not taken into account in most of PTS methods. Continuous observation with stop watch is recommended for establishing the standard time for the agricultural works of Korea. Application: The information drawn from this study would be helpful to the farmer safety assurance system being established by Korean government.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.72-73
• /
• 2014

Recently the concurrent construction method of framework and windows work has been applied for early beginning of exterior finishing works in tall building construction. However, the conventional method makes difficulties in auto-climbing of gang-form and climbing work of lift car since the removal of ACS(auto climbing system) should be preceded for operation of lift car up to the top floor. This study propose a concept model of integrated ACS and lift car system to resolve these problems and begin windows works early in tall building construction.

• Steel and Composite Structures
• /
• v.8 no.1
• /
• pp.85-98
• /
• 2008

In this study the progressive collapse potential of three- and nine-story special steel moment frames designed in accordance with current design code was evaluated by nonlinear static and dynamic analyses. It was observed that the model structures had high potential for progressive collapse when a first story column was suddenly removed. Then the size of beams required to satisfy the failure criteria for progressive collapse was obtained by the virtual work method; i.e., using the equilibrium of the external work done by gravity load due to loss of a column and the internal work done by plastic rotation of beams. According to the nonlinear dynamic analysis results, the model structures designed only for normal load turned out to have strong potential for progressive collapse whereas the structures designed by plastic design concept for progressive collapse satisfied the failure criterion recommended by the GSA guideline.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.125-130
• /
• 1994

Recently,manufacturing work been transformed to small acale production from with various items to act up to user's expectation from mass production with a little items required in the past. The FMS using NC type mother machinaries has been applied actively also in domestic manufacturing line to meet thus tendancy, but there are many machining troubles occured in work process not be settled yet. Nowdays high efficiency has been required no less than high precision in grinding work for the improvement of productivity. In this study, to represent more advanced FMS can be adapted to thus situation In-process type monitoring method using AE and Current sensors is suggested to investigatethe machining condition in grinding process. As results from this experimental study, is is recoqnized well that grinding conditions and dressing point of in time can be estimated effectively using monitoring method suggested. Furthermore, surface shape of grinding wheel on voluntary point of in time can be predicted indirectly through the observation and comparison of AE signal waveform obtained as performance of continuous dressing work.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.98-107
• /
• 1996

The use of composite hyperpatch model is proposed to predict a machine tool positional error over the entire work space. This is an appropriate representation of the distorted work space. This model is valid for any configuration of 3-axis machine tool. Tool position, which is given NC data or CL data, contains error vector in actual work space. In this study, off-line compensation scheme was investigated for tool position error due to inaccuracy in machine tool structure. The error vector in actual work space is corrected by the error model using Newton-Raphson method. The proposed error compensation method shows the possibility of improving machine accuracy at a low cost.