• International Journal of Aeronautical and Space Sciences
• /
• v.1 no.2
• /
• pp.9-16
• /
• 2000

For aerodynamic design of missile bodies of non-circular cross-section, the combination of the slender body theory and the cross-flow analogy can hardly be applied owing to the lack of experimental data. An alternative is to utilize the Euler solution in the design stage. For enhanced accuracy, however, an adequate viscous correction is necessary to the Euler solution. In this work, such a procedure is examined to compensate the viscous effect by utilizing the concept of proportionality factor in cross-flow analogy. Predictions of aerodynamic coefficients combining the Euler solution and the viscous correction via proportionality factor are made for a missile body of elliptic cross-section. Results indicate that the present approach can be adopted in designing missile bodies of non-circular cross-sections.

• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.73-82
• /
• 1998

This paper is especially concerned with the weldment between support beam and square bar that plays important roles in control box of Expansion Joint as a brdige structure. Fatigue strength ({TEX}$$\sigma$_{ult}${/TEX}) of the weldment is dependent on notch factor ({TEX}$K_{f}${/TEX}) become important factors to predict fatigue life. The fatigue notch sensitivity (η) for metals can be divided into two types ; high and low notch sensitivity. In this work, the Expansion Joint weldment was found to have low notch sensitivity. The maximum strain distribution during static loading is similar to the FEM analysis. Fatigue test of real structure was performed up to {TEX}$10^{6}${/TEX} cycles to be compared with predicted endurance limit.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1144-1156
• /
• 2008

In this paper, heaving phenomenon is analyzed by laboratory tests. A laboratory test is consist of building soft clay foundation in plane-strain soil tank, construction of retaining wall, and excavation work. And range of shear strain, and destruction shape about soft clay foundation is compared, and analyzed with results of proposal formula. Using this study, safety factor is suggested for heaving phenomenon in the construction of wall on the soft clay. Actual theory is suggested by this suggested safety factor. There are various proposal formula for heaving phenomenon. For example, Terzaghi & Peck, Tschebotarioff, Bjerrum & Eide(Experience formula) and so on. Terzaghi & Peck's proposal formula is chosen, compared with laboratory test's result and analyzed in this study. A soft clay used in study is assumed homogeneous. A Depth of foundation is enough to observe shear strain by heaving phenomenon. Retaining wall is enough hard not to have vertical displacement.

• Smart Structures and Systems
• /
• v.17 no.2
• /
• pp.313-325
• /
• 2016

The paper provides a comprehensive procedure for the mechanical and magnetic design of Langevin transducer based on giant magnetostrictive material. The the transducer is designed to work at its second mode of vibration, having high mechanical quality factor and low damping coefficient. The design procedure is based on an analytical model and it is verified by finite-element analysis. Experimental tests based on impedance response analysis in first and second modes are carried out on the prototype. Results confirm the appropriate design of this transducer, demonstrating the highest mechanical quality factor between the resonant transducers in the literature.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.125-132
• /
• 2007

The purpose of this study is to provide foot classification on young men and women by factor analysis. The sample for this work was chosen from data which were collected and measured by Size Korea during two years ($2003{\sim}2004$). In order to analyze and compare features of the foot of young men and women, analysis was performed about 911 subjects (male: 467, female: 444) on 24 parts such as height (8 parts), width (5 parts), thickness (1 part), circumference (3 parts), length (3 parts) and angle (4 parts). The result of this study can be applied in manufacturing and design of shoes and socks. Also, it will enable us to have fruitful information on considerable items during manufacturing and design of shoes and socks.

• Journal of Korean Physical Therapy Science
• /
• v.4 no.1
• /
• pp.291-301
• /
• 1997

This study was conducted to fine out factors related with the complains low back pain in eldery persons. The Questionnaires was done for 273 eldery persons who live in Pusan, Anyang, Ansan region from May 1996 ro April 1997. The results were as follows : 1. The prevalence rate were 49.5% and among them 20.74% were male was while 68.12% which shows high prevalance of female 2. There were no statistical significance except sex difference(P>0.05) 3. There statistical different with some factor fators which includes general health condition, the frequency of treatment, sleeping bed style, condition for future life (P<0.05). But showed no statistical significance with the other factors. 4. When compared between rural and urban area, there were some statistical difference among some factor such as ; where to treat, moring exercise frequency, walking duration, sleeping bed style, agricultural work involement, prepartory condition for future life.(P<0.05)

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.38-42
• /
• 2006

Pressure drops and friction factors in square channels with twisted tape inserts plus axial interrupted ribs are investigated. Tests are performed for Reynolds numbers ranging from 8,900 to 29,000. The rib height-to-channel hydraulic diameter, $e/D_h$, is kept at 0.057 and test section length-to-hydraulic diameter, $L/D_h$ is 30. The pressure drops and friction factor values are enhanced with axial interrupted ribs and twisted tape inserts. Square channels with twisted tape inserts plus axial interrupted ribs show the greatest pressure loss penalty in the present work. Friction factor data obtained for the square channel with twisted tape inserts plus axial interrupted ribs are less than those in the past publications for circular tubes with axial interrupted ribs and twisted tape inserts.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.82-84
• /
• 2004

This paper has calculated DSM's latent capacity through a survey investigating electric arc furnaces in over 2,000 toe companies and related organizations. The latent capacity of DSM calculated with the same time load factor is considered in this paper. The time load factor depends on the probability of each electric arc furnace of the value to work and the consideration of experts and technician's experience. Also, this paper verifies the reliability and application of unposed capacity which compared the old latent capacity of Load Management with KEMCO and KEPCO's Direct Load Control gathering capacity.

• Journal of Information Processing Systems
• /
• v.17 no.1
• /
• pp.163-177
• /
• 2021

Many methods of discovering social networking communities or clustering of features are based on the network structure or the content network. This paper proposes a community discovery method based on topic models using a time factor and an unsupervised clustering method. Online community discovery enables organizations and businesses to thoroughly understand the trend in users' interests in their products and services. In addition, an insight into customer experience on social networks is a tremendous competitive advantage in this era of ecommerce and Internet development. The objective of this work is to find clusters (communities) such that each cluster's nodes contain topics and individuals having similarities in the attribute space. In terms of social media analytics, the method seeks communities whose members have similar features. The method is experimented with and evaluated using a Vietnamese corpus of comments and messages collected on social networks and ecommerce sites in various sectors from 2016 to 2019. The experimental results demonstrate the effectiveness of the proposed method over other methods.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.10-14
• /
• 2022

Low-threshold optical bistability is essential for practical nonlinear optical applications. Many bistable optical devices based on high-quality-factor resonators have been proposed to reduce the threshold intensity. However, demonstrating high-quality-factor resonance requires complex fabrication techniques. In this work, we numerically demonstrate optical bistability with bound states in the continuum in a simple one-dimensional Si photonic crystal. The designed structure supports bound states in the continuum, producing an ultrahigh quality factor without tough fabrication conditions. The threshold intensity of the designed device is 150 MW/cm² at the optical communication wavelength. This scheme may lead to a new class of nonlinear photonics.