• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.105-114
• /
• 2004

In this paper, we propose a collaboration method of diverse agents each others in multi-agent model and describe a node migration algorithm of Mobile-Agent (MA) using by the metadata of Naming-Agent (NA). Collaboration work of multi-agent assures stability of agent system and provides reliability of information retrieval on the distributed environment. NA, an important part of multi-agent, identifies each agents and series the unique name of each agents, and each agent references the specified object using by its name. Also, NA integrates and manages naming service by agents classification such as Client-Push-Agent (CPA), Server-Push-Agent (SPA), and System-Monitoring-Agent (SMA) based on its characteristic. And, NA provides the location list of mobile nodes to specified MA. Therefore, when MA does move through the nodes, it is needed to improve the efficiency of node migration by specified priority according to hit_count, hit_ratio, node processing and network traffic time. Therefore, in this paper, for the integrated naming service, we design Naming Agent and show the structure of metadata which constructed with fields such as hit_count, hit_ratio, total_count of documents, and so on. And, this paper presents the flow of creation and updating of metadata and the method of node migration with hit_count through the collaboration of multi-agent.

• Journal of Environmental Impact Assessment
• /
• v.6 no.1
• /
• pp.5-31
• /
• 1997

Strategic Environmental Assessment (SEA) is an assessment process integrated with policy and planning processes considering environmental impacts, not at the level of individual project, but at higher level of policy and plan. Presently, two systems for the SEA are being implemented in Korea. One is "the consultation of environmental investigation into a change in national land utilization", which is to be pre-discussed with the head of the related central administrative organizations, based on the respective individual code. The other is "the consultation of environmental investigation into an administrative plan and project", which is to be pre-discussed with the minister of the environments for the administrative plan. However, these two systems are not integrated procedures with the planning process. In other words, there is a separate post-environmental assessment after planning. Also concrete proposal is not yet prepared for the method and procedure of environmental investigation about details of the planning. Therefore, they do not playa role in taking precautions for environmentally sustainable development. In this study, for the effective environmental investigation at the level of planning, environmental assessment model to be integrated with urban comprehensive plans was developed. The results of this study can be summarized as follows: First, based on the analysis of systematic problems in environmental investigation of this country, the study compared and analysed the SEA method of foreign countries. derived the potential limitations in its applications to this country. Also, the new method in this study, is integrated into planning process by improving the limitations. Thus, we developed the SEA model for this country, which consists of seven steps ; Phase 1; establishing a work program, Phase 2; defining the scop. of the SEA, Phase 3; analyzing an existing environmental situation, Phase 4; examining the consistency with environmental policy, Phase 5; appraising and synthesizing the plan content, Phase 6; proposing recommendations, Phase 7; monitoring and feedback. Second, the two types of application program of the developed assessment model were proposed. One is to integrate this model into planning process, and the other is for the institute and ministry of environments to implement SEA after planning. An aim of this study was developing an environmental assessment model at the planning level which was not yet established in this country and was to apply the model to urban comprehensive plan for inspection. This research will make the effective operation of environmental investigation system possible at the planning level in this country and contribute to the environmental protection at the global level.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.193-201
• /
• 1993

In a number of areas, there are important benefits to be gained when we bring both the detection and monitoring abilities of remote sensing as well as the philosophical approach and analytic capabilities of a geographic information system to bear on a problem. A key area in the joint applications of remote sensing technology and GIS is to identify change. Whether this change is of interest for its own sake, or because the change causes us to act (for example, to update a map), remote sensing provides an excellent suite of tools for detecting change. At the same time, a GIS is perhaps the best analytic toot for quantifying the process of change. There are two alternative methods for quantifying changes. The conceptually simple approach is to un the pixel values in each of the images. This method is practical but may be too simple to identify the variety of changes in a complex scene. The common alternative is called symbolic change detection. The analyst first decides on a set of thematic categories that are important to distinguish for the application. This approach is useful only if accurate landuse/cover classifications can be obtained. Persons conducting digital change detection must be intimately familiar with the environment under study, the quality of the data set and the characteristics of change detection algorithms. Also, much work remains to identify optimum change detection algorithms for specific geographic areas and problems.

• Journal of radiological science and technology
• /
• v.28 no.1
• /
• pp.13-17
• /
• 2005

In domestic nondestructive testing(NDT) field, there have recently been radiation exposure accidents due to a disregard for confirmation of the position of radioisotope during the test. In order to prevent these kinds of accidents, a scintillating film has been developed. The scintillating film that can convert gamma-ray to visible light has a function of the position detection of radioisotope in a opaque guide tube of an NDT apparatus. The aim of this study is to enhance the visibility performance of the scintillating film and find out the best configuration of the scintillating film. In order to find appropriate materials for the scintillating film, various inorganic scintillating materials were evaluated in this work. An absolute luminance of the scintillating films was measured by luminance meter for evaluation of visibility performance. Ir-192 gamma projector was used for NDT apparatus. The experiment shows that the scintillating film with reflective layer was the more effective performance for visibility. The higher mixing ratio of scintillating material to binding material, the higher luminance was measured. $Gd_2O_2S(Tb)$ inorganic powder as the scintillating materials had the best performance for visibility of the scintillating film. The developed scintillating film helps to ensure safer environment to the operators.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.328-336
• /
• 2018

Background: Biogenic fabrication of silver nanoparticles from naturally occurring biomaterials provides an alternative, eco-friendly and cost-effective means of obtaining nanoparticles. It is a favourite pursuit of all scientists and has gained popularity because it prevents the environment from pollution. Our main objective to take up this project is to fabricate silver nanoparticles from lichen, Usnea longissima and explore their properties. In the present study, we report a benign method of biosynthesis of silver nanoparticles from aqueous-ethanolic extract of Usnea longissima and their characterization by ultraviolet-visible (UV-vis), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) and scanning electron microscopy (SEM) analyses. Silver nanoparticles thus obtained were tested for antimicrobial activity against gram positive bacteria and gram negative bacteria. Results: Formation of silver nanoparticles was confirmed by the appearance of an absorption band at 400 nm in the UV-vis spectrum of the colloidal solution containing both the nanoparticles and U. longissima extract. Poly(ethylene glycol) coated silver nanoparticles showed additional absorption peaks at 424 and 450 nm. FTIR spectrum showed the involvement of amines, usnic acids, phenols, aldehydes and ketones in the reduction of silver ions to silver nanoparticles. Morphological studies showed three types of nanoparticles with an abundance of spherical shaped silver nanoparticles of 9.40-11.23 nm. Their average hydrodynamic diameter is 437.1 nm. Results of in vitro antibacterial activity of silver nanoparticles against Staphylococcus aureus, Streptococcus mutans, Streptococcus pyrogenes, Streptococcus viridans, Corynebacterium xerosis, Corynebacterium diphtheriae (gram positive bacteria) and Escherichia coli, Klebsiella pneuomoniae and Pseudomonas aeruginosa (gram negative bacteria) showed that it was effective against tested bacterial strains. However, S. mutans, C. diphtheriae and P. aeruginosa were resistant to silver nanoparticles. Conclusion: Lichens are rarely exploited for the fabrication of silver nanoparticles. In the present work the lichen acts as reducing as well as capping agent. They can therefore, be used to synthesize metal nanoparticles and their size may be controlled by monitoring the concentration of extract and metal ions. Since they are antibacterial they may be used for the treatment of bacterial infections in man and animal. They can also be used in purification of water, in soaps and medicine. Their sustained release may be achieved by coating them with a suitable polymer. Silver nanoparticles fabricated from edible U. longissima are free from toxic chemicals and therefore they can be safely used in medicine and medical devices. These silver nanoparticles were stable for weeks therefore they can be stored for longer duration of time without decomposition.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.203-209
• /
• 2019

In this work, a new land-specific resistance measuring device (GM) and a measuring probe (Grounding Rod) are connected to the WENNER quadrant as power-line communication (PLC). In groups of two (P1,P2) probes, five to ten probes are installed in series on the ground at intervals of 1m, 2m, 4m, 8m, and 16m, respectively. If the PLC signal from the GMD is detected by the receiver of the Probe 1 (P1) for measurement, the minute voltage and current for measurement flow from the PSD (power supply) attached to the probe to the ground, and then, through the soil between P1 and P2, enters the Probe 1 (P2). The resistance value is then measured by the principle of voltage drop due to ground resistance. Measure the earth resistance every T seconds up to 1 trillion and store the measured data on the Arduino Server mounted on the main equipment. Stored measurement data can be derived from formulas by Ohm's Law and from inherent resistance (here,). Data obtained in real time will be linked to CDGES programs installed on Main PC, enabling data analysis and real-time monitoring of the ground environment on land. In addition, a three-dimensional display is possible with 3D graph support by identifying seasonal characteristics such as temperature and humidity of land (soils). The limitations of the study will require specific application measures of Test Bed for commercial access to a model that has been developed and operated experimentally.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.33 no.1
• /
• pp.371-401
• /
• 2022

If the blockchain means storing information in a distributed environment that cannot be forged or altered, it is mentioned that this is similar to what librarians collect, preserve, and share authoritative information. In this way, this study examined blockchain technology as a way to collect and provide reliable information, increase work efficiency inside and outside the library, and strengthen cooperative networks. This study attempted to propose various ways to utilize blockchain technology in book relations based on literature surveys and case studies in other fields. To this end, this study first analyzed the field and cases of blockchain application to confirm the possibility and value of blockchain application in the library field, and proposed 12 ways to utilize it based on this. The utilization model was proposed by dividing it into operation and service sectors. In the operation sector, it is a digital identity-based user record storage and authentication function, transparent management and traceable monitoring function, voting-based personnel and recruitment system, blockchain governance-based network efficiency function, and blockchain-based next-generation device management and information integration function. The service sector includes improved book purchase and sharing efficiency due to simplification of intermediaries, digital content copyright protection and management functions, customized service provision based on customer behavior analysis, blockchain-based online learning platforms, sharing platforms, and P2P-based reliable information sharing platforms.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.195-208
• /
• 2023

The nodular diaphragm wall (NDW) is a novel type of foundation with favorable engineering characteristics, which has already been utilized in high-rise buildings and high-speed railways. Compared to traditional diaphragm walls, the NDW offers significantly improved vertical bearing capacity due to the presence of nodular parts while reducing construction time and excavation work. Despite its potential, research on the vertical bearing characteristics of NDW requires further study, and the investigation and visualization of its displacement pattern and failure mode are scant. Meanwhile, the measurement of the force component acting on the nodular parts remains challenging. In this paper, the vertical bearing characteristics of NDW are studied in detail through the indoor model test, and the displacement and failure mode of the foundation is analyzed using particle image velocimetry (PIV) technology. The principles and methods for monitoring the force acting on the nodular parts are described in detail. The research results show that the nodular part plays an essential role in the bearing capacity of the NDW, and its maximum load-bearing ratio can reach 30.92%. The existence of the bottom nodular part contributes more to the bearing capacity of the foundation compared to the middle nodular part, and the use of both middle and bottom nodular parts increases the bearing capacity of the foundation by about 9~12% compared to a single nodular part of the NDW. The increase in the number of nodular parts cannot produce a simple superposition effect on the resistance born by the nodular parts since the nodular parts have an insignificant influence on the exertion and distribution of the skin friction of NDW. The existence of the nodular part changes the displacement field of the soil around NDW and increases the displacement influence range of the foundation to a certain extent. For NDWs with three different nodal arrangements, the failure modes of the foundations appear to be local shear failures. Overall, this study provides valuable insights into the performance and behavior of NDWs, which will aid in their effective utilization and further research in the field.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.190-211
• /
• 2010

The purpose of this paper is to provide the preliminary data for maintenance of old trees of natural monuments and establishing protection projects. Accordingly, growth conditions, location circumstances, environment and protection management were analyzed for old trees at 34 sites in Gyeongsangbuk-do. Tree forms, crown, trunk and trees' health, leaves volume were analyzed in survey sites. As the results, the growth of Picrasma quassioides in Songsadong, Andong-si and Catalpa ovata in Hongwon-ri, Cheongsong-gun were not in good condition, along with other old trees of 6 cities (Quercus variabilis in Susan-ri, Uljin-gun, Juniperus chinensis in Hujeong-ri, Uljin-gun, Pyrus ussuriensis in Ssangjeon-ri, Uljin-gun, Salix glandulosa var. pilosa in Deokchon-ri, Cheongdo-gun, Pinus densiflora for. multicaulis in Hwasan-ri, Mungyeong-si, Pinus densiflora in Daeha-ri, Mungyeong-si). Accoding to these results, protection project and consistent monitoring are necessary. The analysis results of growth conditions per location circumstances showed that the old trees in the small spaces with large traffic of people were in bad condition. Therefore, it is necessary to secure sufficient space and soil improvement for such trees. The analysis results of growth conditions per species showed that Zelkova serrata, Quercus spp., Pinus densiflora are in good condition while Salix koreensis and others, i.e. a singular tree, are in poor condition. Thus, relatively smaller individuals and separately situated trees need careful management in their protection. The analysis results of trunk's growth ratio showed that Pinus densiflora, Ginkgo biloba, Zelkova serrata are in good condition whereas Juniperus chinensis, Quercus variabilis, Salix koreensis are not. It is a recent trend that tree surgeries are gradually decreasing; there are a number of damaged trees with no maintenance/management, and several sites requiring mend trunks management and cabling, bracing in protection and management projects. Hence, in the future, local government and management organizations should plan for systematic management and establish a protection plan for the natural monument trees. Also, 12 sites were found to be in need to purchase lands in order to secure the growth spaces, and since most of these areas are available for purchase, it is needed to promote a budget and purchase those areas through persuasion of the owner. These areas seems crucial in order to maximize the effect of conservation efforts and budgets for the preservation and restoration of the old trees.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.275-285
• /
• 2021

COVID-19 is threatening the safety of ships and seafarers by delaying seafarer rotation. Shipping companies and governments have a blindspot in case of the onboard environment of seafarers. An effective, alternative plan should be devised to eliminate the possibility of human accidents in an emergency that threatens the safety of seafarers. According to the survey of former and current seafarers, the most important factor in boarding life was safety, and the most necessary thing during emergencies was to secure smooth seafarer rotation rather than improve wages and welfare. By analyzing the major routes of national shipping companies by continent, ports with a large number of calls and a high Air Connectivity Index were selected as the base port. In addition, the route was designed for effective, domestic seafarer rotation during international shipping. Other countries must be consulted to establish a travel route linking ships, ports, and airports for the safe return of sailors to their home countries during an emergency. In addition, it is necessary to work together for the seafarers who are in trouble of seafarer rotation through cooperation with the International Maritime Organization(IMO). Starting with this, the government should have a monitoring system for the return and non-return routes as well as the number of seafarers on board. If such a system is established, it will be able to determine the response direction of our country's policy in case of an emergency. Along with the shipping company's ef orts to improve the treatment of seafarers, national and social attention will be needed to review domestic laws and improve awareness about seafarers.